2N4392 MECHANICAL DATA Dimensions in mm (inches) JFET SWITCHING N CHANNEL- DEPLETION 5.84 (0.230) 5.31 (0.209) 5.33 (0.210) 4.32 (0.170) 4.95 (0.195) 4.52 (0.178) 12.7 (0.500) min. FEATURES 0.48 (0.019) 0.41 (0.016) dia. • LOW ON RESISTANCE • FAST SWITCHING • MILITARY OPTIONS AVAILABLE 2.54 (0.100) Nom. 3 1 APPLICATIONS: 2 TO–18 METAL PACKAGE • SWITCHING APPLICATIONS Underside View PIN 1 – Source PIN 2 – Drain PIN 3 – Gate (Gate is connected to case) ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VDS VDG VGS IGF PD TJ TSTG Drain–Source Voltage Drain–Gate Voltage Gate–Source Voltage Forward Gate Current Total Device Dissipation @ TC = 25°C Derate above 25°C Operating Junction Temperature Range Storage Temperature Range 40V 40V 40V 50mA 1.8W 10mW/ °C –65 to +175°C –65 to +175°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3846 Issue 2 2N4392 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit OFF CHARACTERISTICS V(BR)GSS IGSS Gate Source Breakdown Voltage1 Gate Reverse Current IG = 1.0µA VDS = 0 VGS = 20V VDS = 0 VGS = 20V VDS = 0 40 TA = 150°C 0.1 nA 0.2 µA -5 V VGS Gate Source Voltage VDS = 20V ID = 1.0nA VGS(f) Gate Source Forward Voltage IG = 1.0mA VDS = 0 1.0 V VGS = 7V VDS = 20V 0.1 nA VGS = 7V VDS = 20V 0.2 µA 75 mA ID(off) Drain Cut-off Current -0.2 V TA = 150°C ON CHARACTERISTICS IDSS Zero Gate voltage Drain Current1 VGS = 0V VDS = 20V VDS(on) Drain Source On–Voltage ID = 6mA VGS = 0 0.4 V rDS(on) Static Drain Source On Resistance ID = 1.0mA VGS = 0 60 Ω VGS = 0V VDS = 20V 25 ELECTRICAL CHARACTERISTICS Ciss Crss Input Capacitance Reverse Transfer Capacitance f = 1.0MHz VGS = 7V VDS = 0V f = 1.0MHz 14 pF 3.5 SMALL SIGNAL CHARACTERISTICS rds(on) Drain–Source “ON” Resistance VGS = 0V ID = 0 f = 1.0kHz 60 Ω SWITCHING CHARACTERISTICS ton Turn–On Time ID(on) = 6mA 15 toff Turn–Off Time VGS(on) = 7V 35 tr RiseTime ID(on) = 6mA 5.0 tf FallTime VGS(off) = 7V 20 ns 1) Pulse test : Pulse Width < 100µs ,Duty Cycle < 2% 2) ft is defined as the frequency at which |hfe| extrapolates to untity. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3846 Issue 2