RF SAW Filter Part Number Package Application Last Modified 861-RF942.5M-H 2.5 x 2.0 SMD EGSM Mar. 2, 2007 . TYPE : EGSM, Balanced RF SAW Filter PART NUMBER : 861-RF942.5M-H .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Condition Minimum Typical Maximum Units - - 942.5 - MHz Maximum Insertion Loss 925.0~ 960.0 MHz - 2.8 4.0 dB Attenuation: D.C.~ 880.0 MHz 50 52 - 880.0~905.0 MHz 30 44 - Center Frequency (Fo) Symmetry in Band 905.0~ 915.0MHz 10 27 - 980.0~ 1050.0 MHz 21 27 - 1050~ 6000.0 MHz 50 54 dB - 925.0~ 960.0 MHz- Output Amplitude Balance (l S31/S21 l) - -1.3 0 1.2 dB Output Phase Balance (φ(S31)-φ(S21)+180º) - -10 0 10 degree Source Impedence (single ended)* - - 50 - ohm 150/72 - ohm//nh - - Input/Output VSWR 925.0~ 960.0 MHz - 1.8 2.5 - Amplitude Ripple 925.0~ 960.0 MHz - 1.0 2.4 dBp-p Maximum DC Voltage - - - 0 V Maximum Input Power - - - 15 dBm Operating Temperature - -30 - +85 ºC Load Impendance (single ended)* *With Matching Network . PACKAGE OUTLINE (mm) PIN LAYOUT A - B Ground C Out D Out E Ground F - G TEST FIXTURE In FREQUENCY RESPONSE VSWR SMITH CHART Part No.: 861-RF942.5M-H Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map