FT16...H LOGIC LEVEL TRIAC TO220-AB MT2 On-State Current Gate Trigger Current 16 Amp < 10 mA Off-State Voltage 200 V ÷ 600 V This series of TRIACs uses a high performance PNPN technology. MT1 MT2 These parts are intended for general purpose AC switching applications with highly inductive loads. G Absolute Maximum Ratings, according to IEC publication No. 134 SYMBOL PARAMETER IT(RMS) ITSM ITSM I2t IGM PG(AV) di/dt RMS On-state Current Non-repetitive On-State Current Non-repetitive On-State Current Fusing Current Peak Gate Current Average Gate Power Dissipation Critical rate of rise of on-state current Tj Tstg Operating Temperature Storage Temperature SYMBOL VDRM VRRM CONDITIONS All Conduction Angle, TC = 100 ºC Full Cycle, 60 Hz Full Cycle, 50 Hz tp = 10 ms, Half Cycle 20 µs max. Tj =125ºC Tj =125ºC IG = 2x IGT, tr ≤100ns f= 120 Hz, Tj =125ºC Max. 16 168 160 144 4 1 50 -40 -40 PARAMETER Repetitive Peak Off State Voltage Min. +125 +150 VOLTAGE B 200 D 400 Unit A A A A2s A W A/µs ºC ºC Unit M 600 V Jul - 02 FT16...H LOGIC LEVEL TRIAC Electrical Characteristics SYMBOL PARAMETER IGT (1) Gate Trigger Current IDRM /IRRM Off-State Leakage Current Vto (2) Rd(2) VTM (2) VGT VGD IH (2) IL Quadrant CONDITIONS Q1÷Q3 MAX MAX MAX MAX MAX IT = 22.5 Amp, tp = 380 µs, Tj = 25 ºC MAX VD = 12 VDC , RL = 30Ω, Tj = 25 ºC Q1÷Q3 MAX VD = VDRM , RL = 3.3KΩ, Tj = 125 ºC Q1÷Q3 MIN IT = 100 mA , Gate open, Tj = 25 ºC MAX IG = 1.2 IGT, Tj = 25 ºC Q1,Q3 MAX Q2 MAX MIN VD = 0.67 x VDRM , Gate open Tj = 125 ºC dv / dt (2) Critical Rate of Voltage Rise (dI/dt)c (2) Critical Rate of Current Rise (dv/dt)c= 0.1 V/µs Thermal Resistance Junction-Case Rth(j-a) Thermal Resistance Junction-Ambient 08 10 2 5 0.85 25 1.55 1.3 0.2 VD = 12 VDC , RL = 30Ω, Tj = 25 ºC VD = VDRM , RGK = 1KΩ, Tj = 125 ºC VR = VRRM , Tj = 25 ºC Tj = 125 ºC Tj = 125 ºC Threshold Voltage Dynamic Resistance On-state Voltage Gate Trigger Voltage Gate Non Trigger Voltage Holding Current Latching Current Rth(j-c) SENSITIVITY Tj = 125 ºC (dv/dt)c= 10 V/µs Tj = 125 ºC without snubber Tj = 125 ºC for AC 360º conduction angle 15 25 30 40 MIN MIN MIN Unit mA mA µA V mΩ V V V mA mA V/µs 8.5 3.0 - A/ms 1.2 ºC/W 60 ºC/W (1) Minimum IGT is guaranted at 5% of IGT max. (2) For either polarity of electrode MT2 voltage with reference to electrode MT1. PART NUMBER INFORMATION F T 16 08 B H 00 TU FAGOR PACKAGING FORMING TRIAC CURRENT CASE VOLTAGE SENSITIVITY Jul - 02 FT16...H LOGIC LEVEL TRIAC Fig. 1: Maximum power dissipation versus RMS on-state curren (full cycle). Fig. 2: RMS on-state current versus case temperature (full cycle). IT(RMS)(A) P (W) 20 18 18 16 16 14 14 12 12 10 10 8 8 6 6 4 4 2 2 0 IT(RMS)(A) 0 2 4 6 8 10 12 14 16 0 Tc (ºC) 0 25 50 75 100 125 Fig. 4: On-state characteristics (maximum values) Fig. 3: : Relative variation of thermal impedance versus pulse duration. ITM (A) K=[Zth / Rth] 200 1E+0 Tj max Zth(j-c) 100 1E-1 10 Tj = 25 ºC Zth(j-a) Tj max Vto = 0.55 V Rt = 25mΩ 1E-2 1E-3 tp (s) 1E-2 1E-1 1E+0 1E+1 Fig. 5: Surge peak on-state current versus number of cycles VTM (V) 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 1E+2 5E+2 Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp<10ms, and corresponding value of I2t. I TSM (A) I TSM (A), I2 t (A2s) 180 3000 Tj initial = 25 ºC dl/dt limitation 50A/µs t=20ms 160 One cycle 140 1000 120 ITSM Non repetitive Tj initial = 25 ºC 100 80 Repetitive Tc = 85 ºC 60 I2 t 40 20 Number of cycles 0 1 10 100 1000 100 0.01 0.10 1.00 tp (ms) 10.00 Jul - 02 FT16...H LOGIC LEVEL TRIAC Fig. 7: Relative variation of gate trigger current, holding current and latching versus junction temperature (typical values) Fig. 8: Relative variation of critical rate of decrease of main current versus junction temperature IGT,IH,IL[Tj]/IGT,IH,IL.[Tj=25ºC] 2.5 (dI/dt)c [Tj]/(dI/dc)c [Tj specified] 6 5 2.0 IGT 4 1.5 3 IH&IL 1.0 2 0.5 1 Tj(ºC) 0 -40 -20 0 20 40 60 80 100120140 Tj(ºC) 0 0 25 50 75 100 125 PACKAGE MECHANICAL DATA TO-220AB (Plastic) REF. c B b2 L F øI A 14 c2 a1 13 12 a2 M b1 e c1 A a1 a2 B b1 b2 C c1 c2 e F I I4 L I2 I3 M Min. 15.20 DIMENSIONS Milimeters Nominal Max. 15.90 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75 15.80 2.65 1.14 1.14 16.40 14.00 10.40 0.88 1.32 4.60 0.70 2.72 2.70 6.60 3.85 16.80 2.95 1.70 1.70 2.60 Jul - 02