FT10...H HIGH COMMUTATION TRIAC TO220-AB MT2 On-State Current Gate Trigger Current 10 Amp ≤ 25 mA to ≤ 50 mA Off-State Voltage 200 V ÷ 600 V This series of TRIACs uses a high performance PNPN technology. MT1 MT2 These parts are intended for general purpose AC switching applications with highly inductive loads. G Absolute Maximum Ratings, according to IEC publication No. 134 SYMBOL PARAMETER IT(RMS) ITSM ITSM I2t IGM PG(AV) di/dt RMS On-state Current Non-repetitive On-State Current Non-repetitive On-State Current Fusing Current Peak Gate Current Average Gate Power Dissipation Critical rate of rise of on-state current Tj Tstg Operating Temperature Storage Temperature SYMBOL VDRM VRRM CONDITIONS All Conduction Angle, TC = 105 ºC Full Cycle, 60 Hz Full Cycle, 50 Hz tp = 10 ms, Half Cycle 20 µs max. Tj =125ºC Tj =125ºC IG = 2x IGT, tr ≤100ns f= 120 Hz, Tj =125ºC Max. 10 105 100 55 4 1 50 -40 -40 PARAMETER Repetitive Peak Off State Voltage Min. +125 +150 VOLTAGE B 200 D 400 Unit A A A A2s A W A/µs ºC ºC Unit M 600 V Jun - 02 FT10...H HIGH COMMUTATION TRIAC Electrical Characteristics SYMBOL PARAMETER IGT (1) Gate Trigger Current IDRM /IRRM Off-State Leakage Current Vto (2) Rd(2) VTM (2) VGT VGD IH (2) IL Quadrant CONDITIONS 11 25 Q1÷Q3 MAX MAX MAX MAX MAX IT = 14 Amp, tp = 380 µs, Tj = 25 ºC MAX VD = 12 VDC , RL = 33Ω, Tj = 25 ºC Q1÷Q3 MAX VD = VDRM , RL = 3.3KΩ, Tj = 125 ºC Q1÷Q3 MIN IT = 500 mA , Gate open, Tj = 25 ºC MAX 25 IG = 1.2 IGT, Tj = 25 ºC Q1,Q3 MAX 40 Q2 MAX 50 MIN 200 VD = 0.67 x VDRM , Gate open Tj = 125 ºC VD = 12 VDC , RL = 33Ω, Tj = 25 ºC VD = VDRM , Tj = 125 ºC VR = VRRM , Tj = 25 ºC Tj = 125 ºC Tj = 125 ºC Threshold Voltage Dynamic Resistance On-state Voltage Gate Trigger Voltage Gate Non Trigger Current Holding Current Latching Current dv / dt (2) Critical Rate of Voltage Rise (dI/dt)c (2) Critical Rate of Current Rise (dv/dt)c= 0.1 V/µs Rth(j-c) Thermal Resistance Junction-Case Rth(j-a) Thermal Resistance Junction-Ambient Tj = 125 ºC (dv/dt)c= 10 V/µs Tj = 125 ºC without snubber Tj = 125 ºC for AC 360º conduction angle Unit SENSITIVITY MIN MIN MIN 5 14 35 1 5 0.85 40 1.55 1.3 0.2 16 50 mA mA µA V mΩ V V V mA mA 35 50 50 70 60 80 500 1000 V/µs 5.5 9 A/ms 1.5 ºC/W 60 ºC/W (1) Minimum IGT is guaranted at 5% of IGT max. (2) For either polarity of electrode MT2 voltage with reference to electrode MT1. PART NUMBER INFORMATION F T 10 11 B H 00 TU FAGOR PACKAGING FORMING TRIAC CURRENT CASE VOLTAGE SENSITIVITY Jun - 02 FT10...H HIGH COMMUTATION TRIAC Fig. 1: Maximum power dissipation versus RMS on-state curren (full cycle). Fig. 2: RMS on-state current versus case temperature (full cycle). IT(RMS)(A) P (W) 16 14 12 10 8 6 4 2 0 IT(RMS)(A) 0 1 2 3 4 5 6 7 8 9 10 11 12 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 Tc (ºC) 25 50 75 100 125 Fig. 4: On-state characteristics (maximum values) Fig. 3: : Relative variation of thermal impedance versus pulse duration. ITM (A) K=[Zth / Rth] 100 1E+0 Zth(j-c) Tj max 1E-1 10 Zth(j-a) Tj = 25 ºC Tj max Vto = 0.85 V Rt = 35mΩ 1E-2 1E-3 tp (s) 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Fig. 5: Surge peak on-state current versus number of cycles VTM (V) 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp<10ms, and corresponding value of I2t. I TSM (A) 130 120 110 100 90 80 70 60 50 40 30 20 10 0 I TSM (A), I2 t (A2s) dl/dt limitation 50A/µs Tj initial = 25 ºC 1000 t=20ms One cycle ITSM Non repetitive Tj initial = 25 ºC 2 It 100 Repetitive Tc = 90 ºC Number of cycles 1 10 100 1000 10 0.01 0.10 1.00 tp (ms) 10.00 Jun - 02 FT10...H HIGH COMMUTATION TRIAC Fig. 7: Relative variation of gate trigger current, holding current and latching versus junction temperature (typical values) Fig. 8: Relative variation of critical rate of decrease of main current versus junction temperature (dI/dt)c [Tj]/(dI/dc)c [Tj specified] IGT,IH,IL [Tj]/IGT,IH,IL.[Tj=25ºC] 2.5 6 5 2.0 IGT 4 1.5 3 IH&IL 1.0 2 0.5 1 Tj(ºC) 0 -40 -20 0 20 40 60 80 100120140 Tj(ºC) 0 0 25 50 75 100 125 PACKAGE MECHANICAL DATA TO-220AB (Plastic) REF. c B b2 L F øI A 14 c2 a1 13 12 a2 M b1 e c1 A a1 a2 B b1 b2 C c1 c2 e F I I4 L I2 I3 M Min. 15.20 DIMENSIONS Milimeters Nominal Max. 15.90 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75 15.80 2.65 1.14 1.14 16.40 14.00 10.40 0.88 1.32 4.60 0.70 2.72 2.70 6.60 3.85 16.80 2.95 1.70 1.70 2.60 Jun - 02