FT04...H LOGIC LEVEL TRIAC TO220-AB MT2 On-State Current Gate Trigger Current 4 Amp ≤ 5 mA to ≤ 10 mA Off-State Voltage 200 V ÷ 600 V This series of TRIACs uses a high performance PNPN technology. MT1 MT2 These parts are intended for general purpose AC switching applications with highly inductive loads. G Absolute Maximum Ratings, according to IEC publication No. 134 SYMBOL PARAMETER IT(RMS) ITSM ITSM I2t IGM PG(AV) di/dt RMS On-state Current Non-repetitive On-State Current Non-repetitive On-State Current Fusing Current Peak Gate Current Average Gate Power Dissipation Critical rate of rise of on-state current Tj Tstg Operating Temperature Storage Temperature SYMBOL VDRM VRRM CONDITIONS All Conduction Angle, TC = 110 ºC Full Cycle, 60 Hz Full Cycle, 50 Hz tp = 10 ms, Half Cycle 20 µs max. Tj =125ºC Tj =125ºC IG = 2x IGT, tr ≤100ns f= 120 Hz, Tj =125ºC Max. Unit 4 33 30 4.5 4 1 A A A A2s A W A/µs +125 +150 ºC ºC 50 -40 -40 PARAMETER Repetitive Peak Off State Voltage Min. VOLTAGE B 200 D 400 Unit M 600 V Dec - 02 FT04...H LOGIC LEVEL TRIAC Electrical Characteristics SYMBOL IGT (1) IDRM /IRRM Vto(2) Rd(2) VTM(2) VGT VGD IH (2) IL PARAMETER Quadrant CONDITIONS Gate Trigger Current VD = 12 VDC , RL = 33Ω, Tj = 25 ºC Q1÷Q3 MAX VD = VDRM , Q4 MAX MAX Tj = 125 ºC Off-State Leakage Current VR = VRRM , Tj = 25 ºC MAX Tj = 125 ºC Threshold Voltage MAX Tj = 125 ºC Dynamic Resistance MAX IT = 5.5 Amp, tp = 380 µs, Tj = 25 ºC On-state Voltage MAX VD = 12 VDC , RL = 33Ω, Tj = 25 ºC Q1÷Q4(3) MAX Gate Trigger Voltage Gate Non Trigger Voltage VD = VDRM , RL = 3.3KΩ, Tj = 125 ºC Q1÷Q4(3) MIN IT = 100 mA , Gate open, Tj = 25 ºC Holding Current MAX Latching Current IG = 1.2 IGT, Tj = 25 ºC Q1,Q3,Q4(4) MAX Q2 MAX dv / dt (2) Critical Rate of Voltage Rise VD = 0.67 x VDRM , Gate open Tj = 125 ºC (di/dt)c (2) Critical Rate of Current Rise (dv/dt)c= 0.1 V/µs Rth(j-a) 04 05 07 5 5 5 5 7 08 10 09 10 10 1 5 0.9 120 1.6 1.3 0.2 Unit mA mA mA µA V mΩ V V V mA mA 15 15 10 10 20 20 10 10 15 15 25 30 20 20 40 MIN 10 10 20 40 20 V/µs MIN 1.5 1.5 1.8 2.7 2.5 A/ms MIN - - 0.9 2.0 MIN - - Tj = 125 ºC Tj = 125 ºC Tj = 125 ºC (dv/dt)c= 10 V/µs without snubber Rth(j-c) SENSITIVITY Thermal Resistance Junction-Case 2.6 ºC/W Thermal Resistance Junction-Ambient 60 ºC/W (1) Minimum IGT is guaranted at 5% of IGT max. (2) For either polarity of electrode MT2 voltage with reference to electrode MT1. (3) Q4 for 4 Quadrant Triacs Q3 for 3 Quadrant Triacs (4) Only for 4 Quadrant Triacs PART NUMBER INFORMATION F T 04 08 B H 00 TU FAGOR PACKAGING FORMING TRIAC CURRENT CASE VOLTAGE SENSITIVITY Dec - 02 FT04...H LOGIC LEVEL TRIAC Fig. 1: Maximum power dissipation versus RMS on-state curren (full cycle). Fig. 2: RMS on-state current versus case temperature (full cycle). IT(RMS)(A) P (W) 4.5 5 4.0 4 3.5 3.0 3 2.5 2.0 2 1.5 1.0 1 0.5 0 IT(RMS)(A) 0 1 2 3 0 0 4 Tc (ºC) 25 50 75 100 125 Fig. 4: On-state characteristics (maximum values) Fig. 3: : Relative variation of thermal impedance versus pulse duration. ITM (A) K=[Zth / Rth] 100 1E+0 Zth(j-c) Tj max 1E-1 10 Zth(j-a) Tj = 25 ºC Tj max Vto = 0.85 V Rt = 35mΩ 1E-2 1E-3 tp (s) 1E-2 1E-1 1E+0 1E+1 VTM (V) 1 1E+2 5E+2 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Fig. 5: Surge peak on-state current versus number of cycles Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp<10ms, and corresponding value of I2t. I TSM (A) I TSM (A), I2 t (A2s) dl/dt limitation 50A/µs 30 Tj initial = 25 ºC t=20ms One cycle 100 25 ITSM Non repetitive Tj initial = 25 ºC 20 15 Repetitive Tc = 90 ºC 10 10 2 It 5 Number of cycles 0 1 10 100 1000 1 0.01 0.10 1.00 tp (ms) 10.00 Dec - 02 FT04...H LOGIC LEVEL TRIAC Fig. 7: Relative variation of gate trigger current, holding current and latching versus junction temperature (typical values) Fig. 8: Relative variation of critical rate of decrease of main current versus junction temperature (dI/dt)c [Tj]/(dI/dc)c [Tj specified] IGT,IH,IL [Tj]/IGT,IH,IL.[Tj=25ºC] 2.5 6 5 2.0 IGT 4 1.5 3 IH&IL 1.0 2 0.5 1 Tj(ºC) 0 -40 -20 0 20 40 60 80 100120140 Tj(ºC) 0 0 25 50 75 100 125 PACKAGE MECHANICAL DATA TO-220AB (Plastic) REF. c B b2 L F øI A 14 c2 a1 13 12 a2 M b1 e c1 A a1 a2 B b1 b2 C c1 c2 e F I I4 L I2 I3 M Min. 15.20 DIMENSIONS Milimeters Nominal Max. 15.90 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75 15.80 2.65 1.14 1.14 16.40 14.00 10.40 0.88 1.32 4.60 0.70 2.72 2.70 6.60 3.85 16.80 2.95 1.70 1.70 2.60 Dec - 02