FT08...I HIGH COMMUTATION TRIAC IPAK (Plastic) On-State Current Gate Trigger Current 8 Amp < 25 mA to < 50 mA Off-State Voltage 200 V ÷ 600 V MT2 This series of TRIACs uses a high performance PNPN technology. MT1 These devices are intended for AC control applications using surface mount technology. MT2 G The high commutation performances combined with high sensitivity, make them perfect in all applications like solid state relays, home appliances, power tools, small motor drives... Absolute Maximum Ratings, according to IEC publication No. 134 SYMBOL PARAMETER CONDITIONS Min. IT(RMS) ITSM ITSM I2t IGM PGM PG(AV) di/dt RMS On-state Current Non-repetitive On-State Current Non-repetitive On-State Current Fusing Current Peak Gate Current Peak Gate Dissipation Gate Dissipation Critical rate of rise of on-state current All Conduction Angle, TC = 110 ºC Half Cycle, 60 Hz Half Cycle, 50 Hz tp = 10 ms, Half Cycle 20 µs max. 20 µs max. 20 ms max. IG = 2 x IGT Tr ≤ 100 ns, F = 120 Hz Tj = 125 ºC 8 84 80 36 Tj Tstg TL Operating Temperature Range Storage Temperature Range Lead Temperature for soldering SYMBOL VDRM VRRM Repetitive Peak Off State Voltage 4 10 1 20 -40 -40 10s max. PARAMETER Max. +125 +150 260 VOLTAGE B 200 D 400 Unit A A A A 2s A W W A/µs ºC ºC ºC Unit M 600 V Jun - 02 FT08...I HIGH COMMUTATION TRIAC Electrical Characteristics SYMBOL IGT PARAMETER Quadrant CONDITIONS Gate Trigger Current Q1÷Q3 MAX VD = 12 VDC , RL = 33Ω Tj = 25 ºC IDRM /IRRM Off-State Leakage Current MAX MAX VTM* IT = 11 Amp, tp = 380 µs, Tj = 25 ºC MAX On-state Voltage VGT VD = 12 VDC , RL = 33Ω, Tj = 25 ºC Q1÷Q3 MAX Gate Trigger Voltage VGD Gate Non Trigger Voltage VD = VDRM , RL = 3.3KΩ, Tj = 125 ºC Q1÷Q3 MIN IT = 100 mA , Gate open, Tj = 25 ºC IH* Holding Current MAX IL Latching Current IG = 1.2 IGT, Tj = 25 ºC Q1,Q3 MAX Q2 MAX V = 0.67 x V , DRM Gate open dv / dt* Critical Rate of Voltage Rise D MIN Tj = 125 ºC (di/dt)c* Critical Rate of Current Rise (dv/dt)c= 0.1 V/µs Rth(j-a) MIN MIN MIN Tj = 125 ºC Tj = 125 ºC Tj = 125 ºC (dv/dt)c= 15 V/µs without snubber Rth(j-c) 11 25 Tj = 125 ºC Tj = 25 ºC VR = VDRM , VR = VRRM , Unit SENSITIVITY 14 35 16 50 1 5 1.55 1.3 0.2 mA mA µA V V V mA mA 25 25 50 200 35 50 60 400 50 80 80 1000 V/µs 9 4.5 9 4.5 A/ms 4.5 Thermal Resistance Junction-Case 1.6 ºC/W Thermal Resistance Junction-Ambient 100 ºC/W (*) For either polarity of electrode MT2 voltage with reference to electrode MT1. PART NUMBER INFORMATION F T 08 11 B I 00 TU FAGOR PACKAGING FORMING TRIAC CURRENT CASE VOLTAGE SENSITIVITY Jun - 02 FT08...I HIGH COMMUTATION TRIAC Fig. 1: Maximum power dissipation versus average on-state current Fig. 2: Average and DC on-state current versus case temperature P (W) I T(RMS) (A) 10 9 α = 180 º 8 8 7 6 6 5 4 4 3 2 α 2 180 º α 1 IT(av)(A) 0 1 0 3 2 4 5 6 7 Tc (ºC) 0 8 0 Fig. 3: Relative variation of thermal impedance junction to case versus pulse duration 25 50 75 100 125 Fig. 4: Relative variation of gate trigger current and holding current versus junction temperature K = [Zth(j-c) / Rth (j-c)] IGT, IH, IL (Tj) / IGT, IH, IL (Tj = 25 ºC) 1.0 2.0 1.6 0.5 IGT 1.2 IH & IL 0.8 0.2 0.4 0.1 1E-3 tp (s) 1E-2 1E-1 1E+0 Tj (ºC) 0.0 -40 -20 0 20 40 60 80 100 120 140 Fig. 5: Non repetitive surge peak on-state current versus number of cycles Fig. 6: Non repetitive surge peak on-state current for a sinusoidal pulse with width: tp < 10 ms, and corresponding value of I2t. I TSM (A) ITSM(A). I2t (A2s) 80 500 Tj initial = 25 ºC Tj initial = 25 ºC 70 ITSM 60 50 100 40 I2 t 30 20 10 Number of cycles 0 1 10 100 1000 tp(ms) 10 1 2 5 10 Jun - 02 FT08...I HIGH COMMUTATION TRIAC Fig. 8: On-state characteristics (maximum values). ITM(A) 100.0 10.0 Tj max Vto = 0.8 V Rd = 60 mΩ Tj = Tj max. Tj = 25 ºC 1.0 VTM(V) 0.1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 PACKAGE MECHANICAL DATA IPAK TO 251-AA 8º±2º REF. A ø1x0.15 E1 c2 E L3 8º±2º 8º±2º D1 D H 8º±2º 8º±2º L1 e b b1 L A1 c A A1 b b1 c c2 D D1 E E1 e L L1 L3 Min. 2.19 0.89 0.64 0.76 0.46 5.97 5.21 6.35 5.21 8.89 1.91 0.89 DIMENSIONS Milimeters Nominal 2.3±0.08 1.067±0.01 0.75±0.1 0.95 0.8±0.013 6.1±0.1 6.58±0.14 5.36±0.1 2.28BSC 9.2±0.2 2±0.1 Max. 2.38 1.14 0.89 1.14 0.58 6.22 5.52 6.73 5.46 9.65 2.28 1.27 Marking: type number Weight: 0.2 g Jun - 02