ETC UPD160040B

DATA SHEET
MOS INTEGRATED CIRCUIT
µPD160040B
384-OUTPUT TFT-LCD SOURCE DRIVER
(COMPATIBLE WITH 256-GRAY SCALE)
DESCRIPTION
The µPD160040B is a source driver for TFT-LCDs capable of dealing with displays with 256-gray scale. Data input
is based on digital input configured as 8 bits by 6 dots (2 pixels), which can realize a full-color display of 16,777,216
colors by output of 256 values γ -corrected by an internal D/A converter and 8-by-2 external power modules.
Because the output dynamic range is as large as VSS2 + 0.2 V to VDD2 – 0.2 V, level inversion operation of the LCD’s
common electrode is rendered unnecessary. Also, to be able to deal with dot-line inversion, n-line inversion and
column line inversion when mounted on a single side, this source driver is equipped with a built-in 8-bit D/A converter
circuit whose odd output pins and even output pins respectively output gray-scale voltage of differing polarity.
FEATURES
• CMOS level input
• 384 outputs
• Input of 8 bits (gray scale data) by 6 dots
• Capable of outputting 256 values by means of 8-by-2 external power modules (16 units) and a D/A converter
• Logic power supply voltage (VDD1): 2.5 to 3.6 V
• Driver power supply voltage (VDD2): 12.5 to 15.5 V (switchable, VSEL)
• Output dynamic range: VSS2 + 0.2 V to VDD2 – 0.2 V
• High-speed data transfer: fCLK. = 55 MHz MAX. (internal data transfer speed when operating at 3.0 V ≤ VDD1 ≤ 3.6 V)
fCLK. = 40 MHz MAX. (internal data transfer speed when operating at 2.5 V ≤ VDD1 < 3.0 V)
• Apply for dot-line inversion, n-line inversion and column line inversion
• Output voltage polarity inversion function (POL)
• Output inversion function (POL21, POL 22)
• Output reset control is possible (MODE)
• Trough-rate control is possible (SRC)
• Output resistance control is possible (ORC)
• Single bank arrangement is possible (Loaded with slim TCP)
ORDERING INFORMATION
Part Number
Package
µPD160040BN-xxx
TCP (TAB package)
Remark The TCP’s external shape is customized. To order the required shape, so please contact one of our sales
representatives.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. S15953EJ2V0DS00 (2nd edition)
Date Published January 2003 NS CP (K)
Printed in Japan
The mark ★ shows major revised points.
2001
µPD160040B
1. BLOCK DIAGRAM
STHR
R,/L
CLK
STB
MODE
STHL
VDD1
VSS1
64-bit bidirectional shift register
C1 C2
C63 C64
D00-D07
D10-D17
D20-D27
D30-D37
D40-D47
D50-D57
POL21
POL22
Data register
Latch
POL
VDD2
Level shifter
VSS2
D/A converter
V0-V15
VSEL
SRC
ORC
Voltage follower output
Input
TEST
S1
S2
S3
S384
Remark /xxx indicates active low signal.
2. RELATIONSHIP BETWEEN OUTPUT CIRCUIT AND D/A CONVERTER
S1
V7
Multiplexer
8-bit D/A converter
8
·····
V8
S383
8
·····
V0
S2
V15
POL
2
Data Sheet S15953EJ2V0DS
S384
µPD160040B
3. PIN CONFIGURATION (µPD160040BN-xxx) (Copper Foil Surface, Face-up)
STHL
D57
D56
:
D51
D50
D47
D46
:
D41
D40
D37
D36
:
D31
D30
SRC
ORC
VSEL
VDD1
R,/L
V15
V14
V13
V12
V11
V10
V9
V8
VDD2
VSS2
V7
V6
V5
V4
V3
V2
V1
V0
VSS1
MODE
TEST
CLK
STB
POL
POL22
POL21
D27
D26
:
D21
D20
D17
D16
:
D11
D10
D07
D06
:
D01
D00
STHR
S384
S383
S382
Copper Foil
Surface
S3
S2
S1
Remark This figure does not specify the TCP package.
Data Sheet S15953EJ2V0DS
3
µPD160040B
4. PIN FUNCTIONS
(1/2)
Pin Symbol
Pin Name
S1 to S384
Driver
D00 to D07
Port 1 display data
I/O
Output
Input
Description
The D/A converted 256-gray-scale analog voltage is output.
The display data is input with a width of 48 bits, viz., the gray scale data
D10 to D17
(8 bits) by 6 dots (2 pixels).
D20 to D27
DX0: LSB, DX7: MSB
D30 to D37
Port 2 display data
Input
Shift direction control
Input
D40 to D47
D50 to D57
R,/L
The shift direction control pin of shift register. The shift directions of the
shift registers are as follows.
R,/L = H (right shift): STHR (input) →S1→S384→STHL (output)
R,/L = L (left shift) : STHL (input) →S384→S1→STHR (output)
★
STHR
Right shift start pulse
I/O
These are the start pulse input/output pins when connected in cascade.
Loading of display data starts when a H level is read at the rising edge
of CLK.
A H level should be input at the pulse of one cycle of the clock signal.
★
STHL
Left shift start pulse
I/O
If the start pulse input is more than 2 CLK, the first 1 CLK of the H-level
input is valid.
For right shift, STHR is input and STHL is output.
For left shift, STHL is input and STHR is output.
CLK
Shift clock
Input
The shift clock input pin of shift register. The display data is loaded into
the data register at the rising edge.
When 66 clock pulses are input after input of the start pulse, input of
display data is halted automatically. The contents of the shift register
are cleared at the STB’s rising edge.
STB
Latch
Input
The contents of the data register are transferred to the latch circuit at
the rising edge. In addition, at the falling edge, the gray scale voltage is
supplied to the driver. It is necessary to ensure input of one pulse per
horizontal period.
SRC
Through rate control
Input
SRC = H: High through rate mode (large current consumption)
SRC = L: Low through rate mode (small current consumption)
SRC is pulled up to the VDD1 in the IC.
ORC
Output resistance control
Input
ORC = H: Low output resistance mode
ORC = L: High output resistance mode
ORC is pulled up to the VDD1 in the IC.
POL
Polarity input
Input
POL = L: The S2n−1 output uses V0-V7 as the reference supply. The S2n
output uses V8-V15 as the reference supply.
POL = H: The S2n−1 output uses V8-V15 as the reference supply. The S2n
output uses V0-V7 as the reference supply.
S2n−1 indicates the odd output and S2n indicates the even output. Input
of the POL signal is allowed the setup time (tPOL–STB) with respect to
STB’s rising edge.
When it switches such as POL = H→L or L→H, all output pins are
output reset during STB = H. When it does not switch, all output pins
become Hi-Z (high impedance) during STB = H. Refer to 7.
RELATIONSHIP BETWEEN MODE, STB, SRC, ORC, POL, AND
OUTPUT WAVEFORM for details.
4
Data Sheet S15953EJ2V0DS
µPD160040B
(2/2)
Pin Symbol
MODE
Pin Name
Output reset control
I/O
Input
Description
MODE = H or open: Output reset
MODE = L: No output reset
MODE is pulled up to the VDD1 in the IC.
POL21,
Data inversion
Input
POL22
Select of inversion or no inversion for input data.
POL21: Data inversion or no inversion of Port1.
POL22: Data inversion or no inversion of Port2
POL21, POL22 = H: Data are inverted in the IC.
POL21, POL22 = L: Data are not inverted in the IC.
VSEL
Driver voltage select
Input
The driver voltage can be switched by controlling the stationary bias
current of the output amplifier via VSEL.
VSEL = H: VDD2 = 12.5 to (14.0 V) (large bias current)
VSEL = L or open: VDD2 = (14.0 V) to 15.5 V (small bias current)
LPC is pulled down to the VSS1 in the IC.
V0-V15
γ -corrected power supplies
Input the γ -corrected power supplies from outside by using operational
−
amplifier. During the gray scale voltage output, be sure to keep the gray
scale level power supply at a constant level. Make sure to maintain the
following relationships.
VDD2 – 0.2 V ≥ V0 > V1 > V2 > ... ..., > V6 > V7 ≥ 0.5 VDD2 + 0.5 V
0.5 VDD2 – 0.5 V ≥ V8 > V9 > V10 > ... ..., > V14 > V15 ≥ 0.5 VSS2 + 0.2 V
TEST
Test
Input
Normally, set the TEST pin to H level or leave open.
This pin is pulled up to VDD1 in the IC.
VDD1
Logic power supply
−
2.5 to 3.6 V
VDD2
Driver power supply
−
12.5 to 15.5 V
VSS1
Logic ground
−
Grounding
VSS2
Driver ground
−
Grounding
Cautions 1. The power start sequence must be VDD1, logic input, and VDD2 & V0-V15 in that order.
Reverse this sequence to shut down.
2. To stabilize the supply voltage, please be sure to insert a 0.47 µF bypass capacitor between
VDD1-VSS1 and VDD2-VSS2.
Furthermore, for increased precision of the D/A converter,
insertion of a bypass capacitor of about 0.1 µF is also advised between the γ-corrected
power supply terminals (V0, V1, V2,....., V15) and VSS2.
Data Sheet S15953EJ2V0DS
5
µPD160040B
5. RELATIONSHIP BETWEEN INPUT DATA AND OUTPUT VOLTAGE VALUE
The µPD160040B incorporates a 8-bit D/A converter whose odd output pins and even output pins output
respectively gray scale voltages of differing polarity with respect to the LCD’s counter electrode voltage. The D/A
converter consists of ladder resistors and switches.
The ladder resistors (r0 to r254) are designed so that the ratio of LCD panel (γ -compensated voltages to V0’-V255’ and
V0”-V255” is almost equivalent as shown in Figure 5−2. For the 2 sets of eight γ -compensated power supplies, V0-V7
and V8-V15, respectively, input gray scale voltages of the same polarity with respect to the 0.5 VDD2.
Figure 5−1 shows the relationship between the driving voltages such as liquid-crystal driving voltages VDD2, VSS2 and
0.5 VDD2, and γ -corrected voltages V0-V15 and the input data. Be sure to maintain the voltage relationships below.
VDD2 – 0.2 V ≥ V0 > V1 > V2 > V3 > V4 > V5 > V6 > V7 ≥ 0.5 VDD2 + 0.5 V
0.5 VDD2 – 0.5 V ≥ V8 > V9 > V10 > V11 > V12 > V13 > V14 > V15 ≥ 0.5 VSS2 + 0.2 V
Figures 5−2 and 5−3 show the relation ship between the input data and the output voltage and the resistance values
of the resistor strings.
Figure 5−
−1. Relationship between Input Data and γ -corrected Power Supplies
★
VDD2
0.2 V
V0
32
V1
32
V2
64
V3
64
V4
32
V5
16
V6
15
V7
0.5 V
0.5 VDD2
0.5 V
V8
15
V9
V10
16
32
V11
64
V12
64
V13
32
V14
32
V15
0.2 V
VSS2
00
0F
1F
3F
7F
Input Data (HEX)
6
Data Sheet S15953EJ2V0DS
BF
DF
FF
µPD160040B
Figure 5−
−2. γ-Corrected Voltages and Ladder Resistors Ratio
V255’
V0
r254
Value
rn
Ratio 1
Ratio 2
Value
rn
Ratio 1
Ratio 2
Value
rn
Ratio 1
Ratio 2
Value
0.0014
18
r65
2.33
0.0032
42
r130
1.89
0.0026
34
r195
2.22
0.0031
40
r1
1.11
0.0015
20
r66
2.22
0.0031
40
r131
1.89
0.0026
34
r196
2.22
0.0031
40
r2
1.33
0.0018
24
r67
2.11
0.0029
38
r132
1.78
0.0025
32
r197
2.22
0.0031
40
r3
1.44
0.0020
26
r68
2.00
0.0028
36
r133
1.78
0.0025
32
r198
2.22
0.0031
40
r4
1.67
0.0023
30
r69
2.00
0.0028
36
r134
1.78
0.0025
32
r199
2.22
0.0031
40
r5
1.89
0.0026
34
r70
2.00
0.0028
36
r135
1.78
0.0025
32
r200
2.22
0.0031
40
r6
2.00
0.0028
36
r71
1.89
0.0026
34
r136
1.78
0.0025
32
r201
2.22
0.0031
40
r7
2.11
0.0029
38
r72
2.00
0.0028
36
r137
1.78
0.0025
32
r202
2.33
0.0032
42
r8
2.22
0.0031
40
r73
2.00
0.0028
36
r138
1.78
0.0025
32
r203
2.44
0.0034
44
r9
2.44
0.0034
44
r74
2.00
0.0028
36
r139
1.78
0.0025
32
r204
2.44
0.0034
44
r10
2.56
0.0035
46
r75
2.00
0.0028
36
r140
1.78
0.0025
32
r205
2.56
0.0035
46
r11
2.89
0.0040
52
r76
2.11
0.0029
38
r141
1.78
0.0025
32
r206
2.56
0.0035
46
V15’’
r12
3.11
0.0043
56
r77
2.22
0.0031
40
r142
1.78
0.0025
32
r207
2.56
0.0035
46
r13
3.22
0.0045
58
r78
2.33
0.0032
42
r143
1.67
0.0023
30
r208
2.78
0.0038
50
V16’’
r14
3.44
0.0048
62
r79
2.33
0.0032
42
r144
1.67
0.0023
30
r209
2.78
0.0038
50
r15
3.78
0.0052
68
r80
2.33
0.0032
42
r145
1.67
0.0023
30
r210
2.78
0.0038
50
r16
3.78
0.0052
68
r81
2.22
0.0031
40
r146
1.67
0.0023
30
r211
2.78
0.0038
50
r17
3.89
0.0054
70
r82
2.22
0.0031
40
r147
1.67
0.0023
30
r212
2.89
0.0040
52
r18
4.00
0.0055
72
r83
2.22
0.0031
40
r148
1.67
0.0023
30
r213
2.89
0.0040
52
r19
4.00
0.0055
72
r84
2.22
0.0031
40
r149
1.67
0.0023
30
r214
2.89
0.0040
52
r20
4.00
0.0055
72
r85
2.11
0.0029
38
r150
1.67
0.0023
30
r215
2.89
0.0040
52
r21
4.00
0.0055
72
r86
2.11
0.0029
38
r151
1.67
0.0023
30
r216
2.89
0.0040
52
r22
4.00
0.0055
72
r87
2.11
0.0029
38
r152
1.67
0.0023
30
r217
3.00
0.0042
54
r23
4.00
0.0055
72
r88
2.00
0.0028
36
r153
1.78
0.0025
32
r218
3.00
0.0042
54
r24
4.00
0.0055
72
r89
2.00
0.0028
36
r154
1.78
0.0025
32
r219
3.00
0.0042
54
r25
4.00
0.0055
72
r90
1.89
0.0026
34
r155
1.78
0.0025
32
r220
3.00
0.0042
54
r26
4.00
0.0055
72
r91
1.78
0.0025
32
r156
1.78
0.0025
32
r221
3.00
0.0042
54
r27
4.00
0.0055
72
r92
1.78
0.0025
32
r157
1.89
0.0026
34
r222
3.00
0.0042
54
r28
4.00
0.0055
72
r93
1.78
0.0025
32
r158
1.89
0.0026
34
r223
3.11
0.0043
56
r29
4.00
0.0055
72
r94
1.89
0.0026
34
r159
1.89
0.0026
34
r224
3.11
0.0043
56
r30
4.00
0.0055
72
r95
1.89
0.0026
34
r160
1.89
0.0026
34
r225
3.22
0.0045
58
r31
3.89
0.0054
70
r96
1.89
0.0026
34
r161
1.89
0.0026
34
r226
3.22
0.0045
58
V222’’
r32
3.89
0.0054
70
r97
1.89
0.0026
34
r162
1.89
0.0026
34
r227
3.44
0.0048
62
r33
3.89
0.0054
70
r98
1.78
0.0025
32
r163
1.89
0.0026
34
r228
3.56
0.0049
64
V223’’
r34
3.89
0.0054
70
r99
1.78
0.0025
32
r164
1.89
0.0026
34
r229
3.67
0.0051
66
r35
3.89
0.0054
70
r100
1.78
0.0025
32
r165
1.89
0.0026
34
r230
3.78
0.0052
68
r36
3.89
0.0054
70
r101
1.78
0.0025
32
r166
1.89
0.0026
34
r231
3.78
0.0052
68
r37
3.89
0.0054
70
r102
1.67
0.0023
30
r167
2.00
0.0028
36
r232
3.78
0.0052
68
r38
3.78
0.0052
68
r103
1.56
0.0022
28
r168
2.11
0.0029
38
r233
3.89
0.0054
70
r39
3.67
0.0051
66
r104
1.56
0.0022
28
r169
2.11
0.0029
38
r234
4.00
0.0055
72
r40
3.67
0.0051
66
r105
1.56
0.0022
28
r170
2.11
0.0029
38
r235
4.22
0.0058
76
r41
3.67
0.0051
66
r106
1.56
0.0022
28
r171
2.11
0.0029
38
r236
4.44
0.0062
80
r42
3.67
0.0051
66
r107
1.56
0.0022
28
r172
2.22
0.0031
40
r237
4.56
0.0063
82
r43
3.56
0.0049
64
r108
1.44
0.0020
26
r173
2.22
0.0031
40
r238
4.56
0.0063
82
r44
3.56
0.0049
64
r109
1.44
0.0020
26
r174
2.22
0.0031
40
r239
4.78
0.0066
86
r45
3.56
0.0049
64
r110
1.44
0.0020
26
r175
2.22
0.0031
40
r240
4.78
0.0066
86
r46
3.44
0.0048
62
r111
1.44
0.0020
26
r176
2.22
0.0031
40
r241
4.89
0.0068
88
r47
3.44
0.0048
62
r112
1.44
0.0020
26
r177
2.22
0.0031
40
r242
5.11
0.0071
92
r48
3.33
0.0046
60
r113
1.44
0.0020
26
r178
2.11
0.0029
38
r243
5.44
0.0075
98
r49
3.22
0.0045
58
r114
1.56
0.0022
28
r179
2.11
0.0029
38
r244
5.89
0.0082
106
r50
3.11
0.0043
56
r115
1.67
0.0023
30
r180
2.00
0.0028
36
r245
6.22
0.0086
112
r51
2.89
0.0040
52
r116
1.67
0.0023
30
r181
2.00
0.0028
36
r246
6.56
0.0091
118
r52
2.78
0.0038
50
r117
1.78
0.0025
32
r182
2.00
0.0028
36
r247
6.78
0.0094
122
r53
2.78
0.0038
50
r118
1.89
0.0026
34
r183
2.00
0.0028
36
r248
7.44
0.0103
134
r54
2.67
0.0037
48
r119
1.89
0.0026
34
r184
2.00
0.0028
36
r249
8.11
0.0112
146
r55
2.44
0.0034
44
r120
1.89
0.0026
34
r185
2.00
0.0028
36
r250
9.56
0.0132
172
r56
2.33
0.0032
42
r121
1.89
0.0026
34
r186
2.00
0.0028
36
r251
10.89
0.0151
196
r57
2.33
0.0032
42
r122
2.00
0.0028
36
r187
2.11
0.0029
38
r252
12.22
0.0169
220
r58
2.33
0.0032
42
r123
2.00
0.0028
36
r188
2.22
0.0031
40
r253
14.89
0.0206
268
r59
2.33
0.0032
42
r124
2.00
0.0028
36
r189
2.22
0.0031
40
r254
22.22
0.0308
r60
2.33
0.0032
42
r125
2.00
0.0028
36
r190
2.22
0.0031
40
Total resistance
Minimum resistance value
r1
V253’
V2’’
r252
r2
r224
r13
V224’
V14’’
r223
r14
V223’
V9
r222
r15
V222’
r221
r16
r16
r221
V16’
r15
r222
V15’
V14
r14
r223
V14’
V224’’
r13
r224
r2
r252
V2 ’
V253’’
r1
r253
V1’
V254’’
r0
V7
Ratio 2
1.00
V1’’
r253
V6
Ratio 1
r0
r0
V254’
V1
rn
V0’’
V8
r254
V0’
V15
V255’’
r61
2.33
0.0032
42
r126
2.00
0.0028
36
r191
2.22
0.0031
40
r62
2.33
0.0032
42
r127
2.00
0.0028
36
r192
2.22
0.0031
40
r63
2.33
0.0032
42
r128
2.00
0.0028
36
r193
2.22
0.0031
40
r64
2.33
0.0032
42
r129
2.00
0.0028
36
r194
2.22
0.0031
40
400
13004
18
Remark The resistance ratio1 is a relative ratio in the case of setting the minimum resistance value to 1.
The resistance ratio2 is a relative ratio in the case of setting the total resistance to 1.
Data Sheet S15953EJ2V0DS
7
µPD160040B
Figure 5−
−3. Relationship between Input Data and Output Voltage (POL21, POL22 = L) (1/2)
(Output voltage 1) VDD2 – 0.2 V ≥ V0 > V1 > V2 > V3 > V4 > V5 > V6 > V7 ≥ 0.5 VDD2 + 0.5 V
★
Output voltage1
Data
Output voltage1
Data
00H
V0'
V7
01H
V1'
V7+(V6-V7) X
18
/
02H
V2'
V7+(V6-V7) X
38
03H
V3'
V7+(V6-V7) X
62
04H
V4'
V7+(V6-V7) X
05H
V5'
06H
07H
Output voltage1
Data
Output voltage1
Data
40H
V64'
V4+(V3-V4) X
42
/ 2196
80H
V128' V3+(V2-V3) X
36
/ 2210
C0H
V192' V2+(V1-V2) X
40
/ 1492
584
41H
V65'
V4+(V3-V4) X
84
/ 2196
81H
V129' V3+(V2-V3) X
72
/ 2210
C1H
V193' V2+(V1-V2) X
80
/ 1492
/
584
42H
V66'
V4+(V3-V4) X
126 / 2196
82H
V130' V3+(V2-V3) X
108
/ 2210
C2H
V194' V2+(V1-V2) X
120
/ 1492
/
584
43H
V67'
V4+(V3-V4) X
166 / 2196
83H
V131' V3+(V2-V3) X
142
/ 2210
C3H
V195' V2+(V1-V2) X
160
/ 1492
88
/
584
44H
V68'
V4+(V3-V4) X
204 / 2196
84H
V132' V3+(V2-V3) X
176
/ 2210
C4H
V196' V2+(V1-V2) X
200
/ 1492
V7+(V6-V7) X
118
/
584
45H
V69'
V4+(V3-V4) X
240 / 2196
85H
V133' V3+(V2-V3) X
208
/ 2210
C5H
V197' V2+(V1-V2) X
240
/ 1492
V6'
V7+(V6-V7) X
152
/
584
46H
V70'
V4+(V3-V4) X
276 / 2196
86H
V134' V3+(V2-V3) X
240
/ 2210
C6H
V198' V2+(V1-V2) X
280
/ 1492
V7'
V7+(V6-V7) X
188
/
584
47H
V71'
V4+(V3-V4) X
312 / 2196
87H
V135' V3+(V2-V3) X
272
/ 2210
C7H
V199' V2+(V1-V2) X
320
/ 1492
08H
V8'
V7+(V6-V7) X
226
/
584
48H
V72'
V4+(V3-V4) X
346 / 2196
88H
V136' V3+(V2-V3) X
304
/ 2210
C8H
V200' V2+(V1-V2) X
360
/ 1492
09H
V9'
V7+(V6-V7) X
266
/
584
49H
V73'
V4+(V3-V4) X
382 / 2196
89H
V137' V3+(V2-V3) X
336
/ 2210
C9H
V201' V2+(V1-V2) X
400
/ 1492
0AH
V10' V7+(V6-V7) X
310
/
584
4AH
V74'
V4+(V3-V4) X
418 / 2196
8AH
V138' V3+(V2-V3) X
368
/ 2210
CAH
V202' V2+(V1-V2) X
440
/ 1492
0BH
V11' V7+(V6-V7) X
356
/
584
4BH
V75'
V4+(V3-V4) X
454 / 2196
8BH
V139' V3+(V2-V3) X
400
/ 2210
CBH
V203' V2+(V1-V2) X
482
/ 1492
0CH
V12' V7+(V6-V7) X
408
/
584
4CH
V76'
V4+(V3-V4) X
490 / 2196
8CH
V140' V3+(V2-V3) X
432
/ 2210
CCH
V204' V2+(V1-V2) X
526
/ 1492
0DH
V13' V7+(V6-V7) X
464
/
584
4DH
V77'
V4+(V3-V4) X
528 / 2196
8DH
V141' V3+(V2-V3) X
464
/ 2210
CDH
V205' V2+(V1-V2) X
570
/ 1492
0EH
V14' V7+(V6-V7) X
522
/
584
4EH
V78'
V4+(V3-V4) X
568 / 2196
8EH
V142' V3+(V2-V3) X
496
/ 2210
CEH
V206' V2+(V1-V2) X
616
/ 1492
0FH
V15' V6
4FH
V79'
V4+(V3-V4) X
610 / 2196
8FH
V143' V3+(V2-V3) X
528
/ 2210
CFH
V207' V2+(V1-V2) X
662
/ 1492
10H
V16' V6+(V5-V6) X
68
/
1142
50H
V80'
V4+(V3-V4) X
652 / 2196
90H
V144' V3+(V2-V3) X
558
/ 2210
D0H
V208' V2+(V1-V2) X
708
/ 1492
11H
V17' V6+(V5-V6) X
136
/
1142
51H
V81'
V4+(V3-V4) X
694 / 2196
91H
V145' V3+(V2-V3) X
588
/ 2210
D1H
V209' V2+(V1-V2) X
758
/ 1492
12H
V18' V6+(V5-V6) X
206
/
1142
52H
V82'
V4+(V3-V4) X
734 / 2196
92H
V146' V3+(V2-V3) X
618
/ 2210
D2H
V210' V2+(V1-V2) X
808
/ 1492
13H
V19' V6+(V5-V6) X
278
/
1142
53H
V83'
V4+(V3-V4) X
774 / 2196
93H
V147' V3+(V2-V3) X
648
/ 2210
D3H
V211' V2+(V1-V2) X
858
/ 1492
14H
V20' V6+(V5-V6) X
350
/
1142
54H
V84'
V4+(V3-V4) X
814 / 2196
94H
V148' V3+(V2-V3) X
678
/ 2210
D4H
V212' V2+(V1-V2) X
908
/ 1492
15H
V21' V6+(V5-V6) X
422
/
1142
55H
V85'
V4+(V3-V4) X
854 / 2196
95H
V149' V3+(V2-V3) X
708
/ 2210
D5H
V213' V2+(V1-V2) X
960
/ 1492
16H
V22' V6+(V5-V6) X
494
/
1142
56H
V86'
V4+(V3-V4) X
892 / 2196
96H
V150' V3+(V2-V3) X
738
/ 2210
D6H
V214' V2+(V1-V2) X 1012
/ 1492
17H
V23' V6+(V5-V6) X
566
/
1142
57H
V87'
V4+(V3-V4) X
930 / 2196
97H
V151' V3+(V2-V3) X
768
/ 2210
D7H
V215' V2+(V1-V2) X 1064
/ 1492
18H
V24' V6+(V5-V6) X
638
/
1142
58H
V88'
V4+(V3-V4) X
968 / 2196
98H
V152' V3+(V2-V3) X
798
/ 2210
D8H
V216' V2+(V1-V2) X 1116
/ 1492
19H
V25' V6+(V5-V6) X
710
/
1142
59H
V89'
V4+(V3-V4) X 1004
/ 2196
99H
V153' V3+(V2-V3) X
828
/ 2210
D9H
V217' V2+(V1-V2) X 1168
/ 1492
1AH
V26' V6+(V5-V6) X
782
/
1142
5AH
V90'
V4+(V3-V4) X 1040
/ 2196
9AH
V154' V3+(V2-V3) X
860
/ 2210
DAH
V218' V2+(V1-V2) X 1222
/ 1492
1BH
V27' V6+(V5-V6) X
854
/
1142
5BH
V91'
V4+(V3-V4) X 1074
/ 2196
9BH
V155' V3+(V2-V3) X
892
/ 2210
DBH
V219' V2+(V1-V2) X 1276
/ 1492
1CH
V28' V6+(V5-V6) X
926
/
1142
5CH
V92'
V4+(V3-V4) X 1106
/ 2196
9CH
V156' V3+(V2-V3) X
924
/ 2210
DCH
V220' V2+(V1-V2) X 1330
/ 1492
1DH
V29' V6+(V5-V6) X
998
/
1142
5DH
V93'
V4+(V3-V4) X 1138
/ 2196
9DH
V157' V3+(V2-V3) X
956
/ 2210
DDH
V221' V2+(V1-V2) X 1384
/ 1492
1EH
V30' V6+(V5-V6) X 1070
/
1142
5EH
V94'
V4+(V3-V4) X 1170
/ 2196
9EH
V158' V3+(V2-V3) X
990
/ 2210
DEH
V222' V2+(V1-V2) X 1438
/ 1492
1FH
V31' V5
5FH
V95'
V4+(V3-V4) X 1204
/ 2196
9FH
V159' V3+(V2-V3) X 1024
/ 2210
DFH
V223' V1
20H
V32' V5+(V4-V5) X
70
/
1850
60H
V96'
V4+(V3-V4) X 1238
/ 2196
A0H
V160' V3+(V2-V3) X 1058
2210
E0H
V224' V1+(V0-V1) X
56
/ 3530
21H
V33' V5+(V4-V5) X
140
/
1850
61H
V97'
V4+(V3-V4) X 1272
/ 2196
A1H
V161' V3+(V2-V3) X 1092
/ 2210
E1H
V225' V1+(V0-V1) X
112
/ 3530
22H
V34' V5+(V4-V5) X
210
/
1850
62H
V98'
V4+(V3-V4) X 1306
/ 2196
A2H
V162' V3+(V2-V3) X 1126
/ 2210
E2H
V226' V1+(V0-V1) X
170
/ 3530
23H
V35' V5+(V4-V5) X
280
/
1850
63H
V99'
V4+(V3-V4) X 1338
/ 2196
A3H
V163' V3+(V2-V3) X 1160
/ 2210
E3H
V227' V1+(V0-V1) X
228
/ 3530
24H
V36' V5+(V4-V5) X
350
/
1850
64H
V100' V4+(V3-V4) X 1370
/ 2196
A4H
V164' V3+(V2-V3) X 1194
/ 2210
E4H
V228' V1+(V0-V1) X
290
/ 3530
25H
V37' V5+(V4-V5) X
420
/
1850
65H
V101' V4+(V3-V4) X 1402
/ 2196
A5H
V165' V3+(V2-V3) X 1228
/ 2210
E5H
V229' V1+(V0-V1) X
354
/ 3530
26H
V38' V5+(V4-V5) X
490
/
1850
66H
V102' V4+(V3-V4) X 1434
/ 2196
A6H
V166' V3+(V2-V3) X 1262
/ 2210
E6H
V230' V1+(V0-V1) X
420
/ 3530
27H
V39' V5+(V4-V5) X
558
/
1850
67H
V103' V4+(V3-V4) X 1464
/ 2196
A7H
V167' V3+(V2-V3) X 1296
/ 2210
E7H
V231' V1+(V0-V1) X
488
/ 3530
28H
V40' V5+(V4-V5) X
624
/
1850
68H
V104' V4+(V3-V4) X 1492
/ 2196
A8H
V168' V3+(V2-V3) X 1332
/ 2210
E8H
V232' V1+(V0-V1) X
556
/ 3530
29H
V41' V5+(V4-V5) X
690
/
1850
69H
V105' V4+(V3-V4) X 1520
/ 2196
A9H
V169' V3+(V2-V3) X 1370
/ 2210
E9H
V233' V1+(V0-V1) X
624
/ 3530
2AH
V42' V5+(V4-V5) X
756
/
1850
6AH
V106' V4+(V3-V4) X 1548
/ 2196
AAH
V170' V3+(V2-V3) X 1408
/ 2210
EAH
V234' V1+(V0-V1) X
694
/ 3530
2BH
V43' V5+(V4-V5) X
822
/
1850
6BH
V107' V4+(V3-V4) X 1576
/ 2196
ABH
V171' V3+(V2-V3) X 1446
/ 2210
EBH
V235' V1+(V0-V1) X
766
/ 3530
2CH
V44' V5+(V4-V5) X
886
/
1850
6CH
V108' V4+(V3-V4) X 1604
/ 2196
ACH
V172' V3+(V2-V3) X 1484
/ 2210
ECH
V236' V1+(V0-V1) X
842
/ 3530
2DH
V45' V5+(V4-V5) X
950
/
1850
6DH
V109' V4+(V3-V4) X 1630
/ 2196
ADH
V173' V3+(V2-V3) X 1524
/ 2210
EDH
V237' V1+(V0-V1) X
922
/ 3530
2EH
V46' V5+(V4-V5) X 1014
/
1850
6EH
V110' V4+(V3-V4) X 1656
/ 2196
AEH
V174' V3+(V2-V3) X 1564
/ 2210
EEH
V238' V1+(V0-V1) X 1004
/ 3530
2FH
V47' V5+(V4-V5) X 1076
/
1850
6FH
V111' V4+(V3-V4) X 1682
/ 2196
AFH
V175' V3+(V2-V3) X 1604
/ 2210
EFH
V239' V1+(V0-V1) X 1086
/ 3530
30H
V48' V5+(V4-V5) X 1138
/
1850
70H
V112' V4+(V3-V4) X 1708
/ 2196
B0H
V176' V3+(V2-V3) X 1644
/ 2210
F0H
V240' V1+(V0-V1) X 1172
/ 3530
31H
V49' V5+(V4-V5) X 1198
/
1850
71H
V113' V4+(V3-V4) X 1734
/ 2196
B1H
V177' V3+(V2-V3) X 1684
/ 2210
F1H
V241' V1+(V0-V1) X 1258
/ 3530
32H
V50' V5+(V4-V5) X 1256
/
1850
72H
V114' V4+(V3-V4) X 1760
/ 2196
B2H
V178' V3+(V2-V3) X 1724
/ 2210
F2H
V242' V1+(V0-V1) X 1346
/ 3530
33H
V51' V5+(V4-V5) X 1312
/
1850
73H
V115' V4+(V3-V4) X 1788
/ 2196
B3H
V179' V3+(V2-V3) X 1762
/ 2210
F3H
V243' V1+(V0-V1) X 1438
/ 3530
34H
V52' V5+(V4-V5) X 1364
/
1850
74H
V116' V4+(V3-V4) X 1818
/ 2196
B4H
V180' V3+(V2-V3) X 1800
/ 2210
F4H
V244' V1+(V0-V1) X 1536
/ 3530
35H
V53' V5+(V4-V5) X 1414
/
1850
75H
V117' V4+(V3-V4) X 1848
/ 2196
B5H
V181' V3+(V2-V3) X 1836
/ 2210
F5H
V245' V1+(V0-V1) X 1642
/ 3530
36H
V54' V5+(V4-V5) X 1464
/
1850
76H
V118' V4+(V3-V4) X 1880
/ 2196
B6H
V182' V3+(V2-V3) X 1872
/ 2210
F6H
V246' V1+(V0-V1) X 1754
/ 3530
37H
V55' V5+(V4-V5) X 1512
/
1850
77H
V119' V4+(V3-V4) X 1914
/ 2196
B7H
V183' V3+(V2-V3) X 1908
/ 2210
F7H
V247' V1+(V0-V1) X 1872
/ 3530
38H
V56' V5+(V4-V5) X 1556
/
1850
78H
V120' V4+(V3-V4) X 1948
/ 2196
B8H
V184' V3+(V2-V3) X 1944
/ 2210
F8H
V248' V1+(V0-V1) X 1994
/ 3530
39H
V57' V5+(V4-V5) X 1598
/
1850
79H
V121' V4+(V3-V4) X 1982
/ 2196
B9H
V185' V3+(V2-V3) X 1980
/ 2210
F9H
V249' V1+(V0-V1) X 2128
/ 3530
3AH
V58' V5+(V4-V5) X 1640
/
1850
7AH
V122' V4+(V3-V4) X 2016
/ 2196
BAH
V186' V3+(V2-V3) X 2016
/ 2210
FAH
V250' V1+(V0-V1) X 2274
/ 3530
3BH
V59' V5+(V4-V5) X 1682
/
1850
7BH
V123' V4+(V3-V4) X 2052
/ 2196
BBH
V187' V3+(V2-V3) X 2052
/ 2210
FBH
V251' V1+(V0-V1) X 2446
/ 3530
3CH
V60' V5+(V4-V5) X 1724
/
1850
7CH
V124' V4+(V3-V4) X 2088
/ 2196
BCH
V188' V3+(V2-V3) X 2090
/ 2210
FCH
V252' V1+(V0-V1) X 2642
/ 3530
3DH
V61' V5+(V4-V5) X 1766
/
1850
7DH
V125' V4+(V3-V4) X 2124
/ 2196
BDH
V189' V3+(V2-V3) X 2130
/ 2210
FDH
V253' V1+(V0-V1) X 2862
/ 3530
3EH
V62' V5+(V4-V5) X 1808
/
1850
7EH
V126' V4+(V3-V4) X 2160
/ 2196
BEH
V190' V3+(V2-V3) X 2170
/ 2210
FEH
V254' V1+(V0-V1) X 3130
/ 3530
3FH
V63' V4
7FH
V127' V3
BFH
V191' V2
FFH
V255' V0
8
Data Sheet S15953EJ2V0DS
µPD160040B
Figure 5−
−3. Relationship between Input Data and Output Voltage (POL21, POL22 = L) (2/2)
(Output voltage 2) 0.5 VDD2 – 0.5 V ≥ V8 > V9 > V10 > V11 > V12 > V13 > V14 > V15 ≥ VSS2 + 0.2 V
★
Output voltage2
Data
Output voltage2
Data
00H
V0"
V8
01H
V1"
V9+(V8-V9) X
566
/
02H
V2"
V9+(V8-V9) X
546
03H
V3"
V9+(V8-V9) X
522
04H
V4"
V9+(V8-V9) X
05H
V5"
06H
V6"
07H
Output voltage2
Data
Output voltage2
Data
40H
V64"
V12+(V13-V12) X
2154
/ 2196
80H
V128"
V13+(V12-V13) X
2174
/ 2210
C0H
V192" V14+(V13-V14) X
1452
/ 1492
584
41H
V65"
V12+(V13-V12) X
2112
/ 2196
81H
V129"
V13+(V12-V13) X
2138
/ 2210
C1H
V193" V14+(V13-V14) X
1412
/ 1492
/
584
42H
V66"
V12+(V13-V12) X
2070
/ 2196
82H
V130"
V13+(V12-V13) X
2102
/ 2210
C2H
V194" V14+(V13-V14) X
1372
/ 1492
/
584
43H
V67"
V12+(V13-V12) X
2030
/ 2196
83H
V131"
V13+(V12-V13) X
2068
/ 2210
C3H
V195" V14+(V13-V14) X
1332
/ 1492
496
/
584
44H
V68"
V12+(V13-V12) X
1992
/ 2196
84H
V132"
V13+(V12-V13) X
2034
/ 2210
C4H
V196" V14+(V13-V14) X
1292
/ 1492
V9+(V8-V9) X
466
/
584
45H
V69"
V12+(V13-V12) X
1956
/ 2196
85H
V133"
V13+(V12-V13) X
2002
/ 2210
C5H
V197" V14+(V13-V14) X
1252
/ 1492
V9+(V8-V9) X
432
/
584
46H
V70"
V12+(V13-V12) X
1920
/ 2196
86H
V134"
V13+(V12-V13) X
1970
/ 2210
C6H
V198" V14+(V13-V14) X
1212
/ 1492
V7"
V9+(V8-V9) X
396
/
584
47H
V71"
V12+(V13-V12) X
1884
/ 2196
87H
V135"
V13+(V12-V13) X
1938
/ 2210
C7H
V199" V14+(V13-V14) X
1172
/ 1492
08H
V8"
V9+(V8-V9) X
358
/
584
48H
V72"
V12+(V13-V12) X
1850
/ 2196
88H
V136"
V13+(V12-V13) X
1906
/ 2210
C8H
V200" V14+(V13-V14) X
1132
/ 1492
09H
V9"
V9+(V8-V9) X
318
/
584
49H
V73"
V12+(V13-V12) X
1814
/ 2196
89H
V137"
V13+(V12-V13) X
1874
/ 2210
C9H
V201" V14+(V13-V14) X
1092
/ 1492
0AH
V10"
V9+(V8-V9) X
274
/
584
4AH
V74"
V12+(V13-V12) X
1778
/ 2196
8AH
V138"
V13+(V12-V13) X
1842
/ 2210
CAH
V202" V14+(V13-V14) X
1052
/ 1492
0BH
V11"
V9+(V8-V9) X
228
/
584
4BH
V75"
V12+(V13-V12) X
1742
/ 2196
8BH
V139"
V13+(V12-V13) X
1810
/ 2210
CBH
V203" V14+(V13-V14) X
1010
/ 1492
0CH
V12"
V9+(V8-V9) X
176
/
584
4CH
V76"
V12+(V13-V12) X
1706
/ 2196
8CH
V140"
V13+(V12-V13) X
1778
/ 2210
CCH
V204" V14+(V13-V14) X
966
/ 1492
0DH
V13"
V9+(V8-V9) X
120
/
584
4DH
V77"
V12+(V13-V12) X
1668
/ 2196
8DH
V141"
V13+(V12-V13) X
1746
/ 2210
CDH
V205" V14+(V13-V14) X
922
/ 1492
0EH
V14"
V9+(V8-V9) X
62
/
584
4EH
V78"
V12+(V13-V12) X
1628
/ 2196
8EH
V142"
V13+(V12-V13) X
1714
/ 2210
CEH
V206" V14+(V13-V14) X
876
/ 1492
0FH
V15"
V9
4FH
V79"
V12+(V13-V12) X
1586
/ 2196
8FH
V143"
V13+(V12-V13) X
1682
/ 2210
CFH
V207" V14+(V13-V14) X
830
/ 1492
10H
V16"
V10+(V9-V10) X
1074
/ 1142
50H
V80"
V12+(V13-V12) X
1544
/ 2196
90H
V144"
V13+(V12-V13) X
1652
/ 2210
D0H
V208" V14+(V13-V14) X
784
/ 1492
11H
V17"
V10+(V9-V10) X
1006
/ 1142
51H
V81"
V12+(V13-V12) X
1502
/ 2196
91H
V145"
V13+(V12-V13) X
1622
/ 2210
D1H
V209" V14+(V13-V14) X
734
/ 1492
12H
V18"
V10+(V9-V10) X
936
/ 1142
52H
V82"
V12+(V13-V12) X
1462
/ 2196
92H
V146"
V13+(V12-V13) X
1592
/ 2210
D2H
V210" V14+(V13-V14) X
684
/ 1492
13H
V19"
V10+(V9-V10) X
864
/ 1142
53H
V83"
V12+(V13-V12) X
1422
/ 2196
93H
V147"
V13+(V12-V13) X
1562
/ 2210
D3H
V211" V14+(V13-V14) X
634
/ 1492
14H
V20"
V10+(V9-V10) X
792
/ 1142
54H
V84"
V12+(V13-V12) X
1382
/ 2196
94H
V148"
V13+(V12-V13) X
1532
/ 2210
D4H
V212" V14+(V13-V14) X
584
/ 1492
15H
V21"
V10+(V9-V10) X
720
/ 1142
55H
V85"
V12+(V13-V12) X
1342
/ 2196
95H
V149"
V13+(V12-V13) X
1502
/ 2210
D5H
V213" V14+(V13-V14) X
532
/ 1492
16H
V22"
V10+(V9-V10) X
648
/ 1142
56H
V86"
V12+(V13-V12) X
1304
/ 2196
96H
V150"
V13+(V12-V13) X
1472
/ 2210
D6H
V214" V14+(V13-V14) X
480
/ 1492
17H
V23"
V10+(V9-V10) X
576
/ 1142
57H
V87"
V12+(V13-V12) X
1266
/ 2196
97H
V151"
V13+(V12-V13) X
1442
/ 2210
D7H
V215" V14+(V13-V14) X
428
/ 1492
18H
V24"
V10+(V9-V10) X
504
/ 1142
58H
V88"
V12+(V13-V12) X
1228
/ 2196
98H
V152"
V13+(V12-V13) X
1412
/ 2210
D8H
V216" V14+(V13-V14) X
376
/ 1492
19H
V25"
V10+(V9-V10) X
432
/ 1142
59H
V89"
V12+(V13-V12) X
1192
/ 2196
99H
V153"
V13+(V12-V13) X
1382
/ 2210
D9H
V217" V14+(V13-V14) X
324
/ 1492
1AH
V26"
V10+(V9-V10) X
360
/ 1142
5AH
V90"
V12+(V13-V12) X
1156
/ 2196
9AH
V154"
V13+(V12-V13) X
1350
/ 2210
DAH
V218" V14+(V13-V14) X
270
/ 1492
1BH
V27"
V10+(V9-V10) X
288
/ 1142
5BH
V91"
V12+(V13-V12) X
1122
/ 2196
9BH
V155"
V13+(V12-V13) X
1318
/ 2210
DBH
V219" V14+(V13-V14) X
216
/ 1492
1CH
V28"
V10+(V9-V10) X
216
/ 1142
5CH
V92"
V12+(V13-V12) X
1090
/ 2196
9CH
V156"
V13+(V12-V13) X
1286
/ 2210
DCH
V220" V14+(V13-V14) X
162
/ 1492
1DH
V29"
V10+(V9-V10) X
144
/ 1142
5DH
V93"
V12+(V13-V12) X
1058
/ 2196
9DH
V157"
V13+(V12-V13) X
1254
/ 2210
DDH
V221" V14+(V13-V14) X
108
/ 1492
1EH
V30"
V10+(V9-V10) X
72
/ 1142
5EH
V94"
V12+(V13-V12) X
1026
/ 2196
9EH
V158"
V13+(V12-V13) X
1220
/ 2210
DEH
V222" V14+(V13-V14) X
54
/ 1492
1FH
V31"
V10
5FH
V95"
V12+(V13-V12) X
992
/ 2196
9FH
V159"
V13+(V12-V13) X
1186
/ 2210
DFH
V223" V14
20H
V32"
V11+(V10-V11) X
1780
/ 1850
60H
V96"
V12+(V13-V12) X
958
/ 2196
A0H
V160"
V13+(V12-V13) X
1152
/ 2210
E0H
V224" V15+(V14-V15) X
3474
3530
21H
V33"
V11+(V10-V11) X
1710
/ 1850
61H
V97"
V12+(V13-V12) X
924
/ 2196
A1H
V161"
V13+(V12-V13) X
1118
/ 2210
E1H
V225" V15+(V14-V15) X
3418
/ 3530
22H
V34"
V11+(V10-V11) X
1640
/ 1850
62H
V98"
V12+(V13-V12) X
890
/ 2196
A2H
V162"
V13+(V12-V13) X
1084
/ 2210
E2H
V226" V15+(V14-V15) X
3360
/ 3530
23H
V35"
V11+(V10-V11) X
1570
/ 1850
63H
V99"
V12+(V13-V12) X
858
/ 2196
A3H
V163"
V13+(V12-V13) X
1050
/ 2210
E3H
V227" V15+(V14-V15) X
3302
/ 3530
24H
V36"
V11+(V10-V11) X
1500
/ 1850
64H
V100"
V12+(V13-V12) X
826
/ 2196
A4H
V164"
V13+(V12-V13) X
1016
/ 2210
E4H
V228" V15+(V14-V15) X
3240
/ 3530
25H
V37"
V11+(V10-V11) X
1430
/ 1850
65H
V101"
V12+(V13-V12) X
794
/ 2196
A5H
V165"
V13+(V12-V13) X
982
/ 2210
E5H
V229" V15+(V14-V15) X
3176
/ 3530
26H
V38"
V11+(V10-V11) X
1360
/ 1850
66H
V102"
V12+(V13-V12) X
762
/ 2196
A6H
V166"
V13+(V12-V13) X
948
/ 2210
E6H
V230" V15+(V14-V15) X
3110
/ 3530
27H
V39"
V11+(V10-V11) X
1292
/ 1850
67H
V103"
V12+(V13-V12) X
732
/ 2196
A7H
V167"
V13+(V12-V13) X
914
/ 2210
E7H
V231" V15+(V14-V15) X
3042
/ 3530
28H
V40"
V11+(V10-V11) X
1226
/ 1850
68H
V104"
V12+(V13-V12) X
704
/ 2196
A8H
V168"
V13+(V12-V13) X
878
/ 2210
E8H
V232" V15+(V14-V15) X
2974
/ 3530
29H
V41"
V11+(V10-V11) X
1160
/ 1850
69H
V105"
V12+(V13-V12) X
676
/ 2196
A9H
V169"
V13+(V12-V13) X
840
/ 2210
E9H
V233" V15+(V14-V15) X
2906
/ 3530
2AH
V42"
V11+(V10-V11) X
1094
/ 1850
6AH
V106"
V12+(V13-V12) X
648
/ 2196
AAH
V170"
V13+(V12-V13) X
802
/ 2210
EAH
V234" V15+(V14-V15) X
2836
/ 3530
2BH
V43"
V11+(V10-V11) X
1028
/ 1850
6BH
V107"
V12+(V13-V12) X
620
/ 2196
ABH
V171"
V13+(V12-V13) X
764
/ 2210
EBH
V235" V15+(V14-V15) X
2764
/ 3530
2CH
V44"
V11+(V10-V11) X
964
/ 1850
6CH
V108"
V12+(V13-V12) X
592
/ 2196
ACH
V172"
V13+(V12-V13) X
726
/ 2210
ECH
V236" V15+(V14-V15) X
2688
/ 3530
2DH
V45"
V11+(V10-V11) X
900
/ 1850
6DH
V109"
V12+(V13-V12) X
566
/ 2196
ADH
V173"
V13+(V12-V13) X
686
/ 2210
EDH
V237" V15+(V14-V15) X
2608
/ 3530
2EH
V46"
V11+(V10-V11) X
836
/ 1850
6EH
V110"
V12+(V13-V12) X
540
/ 2196
AEH
V174"
V13+(V12-V13) X
646
/ 2210
EEH
V238" V15+(V14-V15) X
2526
/ 3530
2FH
V47"
V11+(V10-V11) X
774
/ 1850
6FH
V111"
V12+(V13-V12) X
514
/ 2196
AFH
V175"
V13+(V12-V13) X
606
/ 2210
EFH
V239" V15+(V14-V15) X
2444
/ 3530
30H
V48"
V11+(V10-V11) X
712
/ 1850
70H
V112"
V12+(V13-V12) X
488
/ 2196
B0H
V176"
V13+(V12-V13) X
566
/ 2210
F0H
V240" V15+(V14-V15) X
2358
/ 3530
31H
V49"
V11+(V10-V11) X
652
/ 1850
71H
V113"
V12+(V13-V12) X
462
/ 2196
B1H
V177"
V13+(V12-V13) X
526
/ 2210
F1H
V241" V15+(V14-V15) X
2272
/ 3530
32H
V50"
V11+(V10-V11) X
594
/ 1850
72H
V114"
V12+(V13-V12) X
436
/ 2196
B2H
V178"
V13+(V12-V13) X
486
/ 2210
F2H
V242" V15+(V14-V15) X
2184
/ 3530
33H
V51"
V11+(V10-V11) X
538
/ 1850
73H
V115"
V12+(V13-V12) X
408
/ 2196
B3H
V179"
V13+(V12-V13) X
448
/ 2210
F3H
V243" V15+(V14-V15) X
2092
/ 3530
34H
V52"
V11+(V10-V11) X
486
/ 1850
74H
V116"
V12+(V13-V12) X
378
/ 2196
B4H
V180"
V13+(V12-V13) X
410
/ 2210
F4H
V244" V15+(V14-V15) X
1994
/ 3530
35H
V53"
V11+(V10-V11) X
436
/ 1850
75H
V117"
V12+(V13-V12) X
348
/ 2196
B5H
V181"
V13+(V12-V13) X
374
/ 2210
F5H
V245" V15+(V14-V15) X
1888
/ 3530
36H
V54"
V11+(V10-V11) X
386
/ 1850
76H
V118"
V12+(V13-V12) X
316
/ 2196
B6H
V182"
V13+(V12-V13) X
338
/ 2210
F6H
V246" V15+(V14-V15) X
1776
/ 3530
37H
V55"
V11+(V10-V11) X
338
/ 1850
77H
V119"
V12+(V13-V12) X
282
/ 2196
B7H
V183"
V13+(V12-V13) X
302
/ 2210
F7H
V247" V15+(V14-V15) X
1658
/ 3530
38H
V56"
V11+(V10-V11) X
294
/ 1850
78H
V120"
V12+(V13-V12) X
248
/ 2196
B8H
V184"
V13+(V12-V13) X
266
/ 2210
F8H
V248" V15+(V14-V15) X
1536
/ 3530
39H
V57"
V11+(V10-V11) X
252
/ 1850
79H
V121"
V12+(V13-V12) X
214
/ 2196
B9H
V185"
V13+(V12-V13) X
230
/ 2210
F9H
V249" V15+(V14-V15) X
1402
/ 3530
3AH
V58"
V11+(V10-V11) X
210
/ 1850
7AH
V122"
V12+(V13-V12) X
180
/ 2196
BAH
V186"
V13+(V12-V13) X
194
/ 2210
FAH
V250" V15+(V14-V15) X
1256
/ 3530
3BH
V59"
V11+(V10-V11) X
168
/ 1850
7BH
V123"
V12+(V13-V12) X
144
/ 2196
BBH
V187"
V13+(V12-V13) X
158
/ 2210
FBH
V251" V15+(V14-V15) X
1084
/ 3530
3CH
V60"
V11+(V10-V11) X
126
/ 1850
7CH
V124"
V12+(V13-V12) X
108
/ 2196
BCH
V188"
V13+(V12-V13) X
120
/ 2210
FCH
V252" V15+(V14-V15) X
888
/ 3530
3DH
V61"
V11+(V10-V11) X
84
/ 1850
7DH
V125"
V12+(V13-V12) X
72
/ 2196
BDH
V189"
V13+(V12-V13) X
80
/ 2210
FDH
V253" V15+(V14-V15) X
668
/ 3530
3EH
V62"
V11+(V10-V11) X
42
/ 1850
7EH
V126"
V12+(V13-V12) X
36
/ 2196
BEH
V190"
V13+(V12-V13) X
40
/ 2210
FEH
V254" V15+(V14-V15) X
400
/ 3530
3FH
V63"
V11
7FH
V127"
V12
BFH
V191"
V13
FFH
V255" V15
Data Sheet S15953EJ2V0DS
9
µPD160040B
6. RELATIONSHIP BETWEEN INPUT DATA AND OUTPUT PIN
Data format: 8 bits x 2 RGBs (6 dots)
Input width: 48 bits (2-pixel data)
(1) R,/L = H (right shift)
Output
S1
S2
S3
S4
…
S383
S384
Data
D00 to D07
D10 to D17
D20 to D27
D30 to D37
…
D40 to D47
D50 to D57
(2) R,/L = L (left shift)
Output
S1
S2
S3
S4
…
S383
S384
Data
D00 to D07
D10 to D17
D20 to D27
D30 to D37
…
D40 to D47
D50 to D57
POL
S2n–1
Note
Note
S2n
L
V0-V7
V8-V15
H
V8-V15
V0-V7
Note S2n–1 (odd output), S2n (even output), n = 1, 2, ..., 192.
10
Data Sheet S15953EJ2V0DS
µPD160040B
7. RELATIONSHIP BETWEEN MODE, STB, SRC, ORC, POL, AND OUTPUT WAVEFORM
When MODE = H or open and STB = H, all outputs are reset (short) and the gray-scale voltage is output to LCD in
synchronization with the falling edge of STB.
When MODE = L and STB = H, all outputs became Hi-Z and the gray-scale voltage is output to the LCD in
synchronization with the falling edge of STB.
Also, setting the SRC pin to H level allows the bias current value of the output amplifier to rise temporarily, and
setting the ORC pin to H level allows the output resistance value of the amplifier to lower temporarily.
For the timing and the processing of STB, SRC, or ORC during a high-level period, We recommend a thorough
evaluation of the LCD panel specifications in advance.
(1) MODE = H or open
STB
High through rate period
SRC
Low through rate period
ORC
High output resistance period
Low output resistance period
POL
S2n–1
Voltage selected form V0 to V7
Voltage selected form V0 to V7
Voltage selected form V8 to V15
S2n
Voltage selected form V8 to V15
Hi-Z
Voltage selected form V8 to V15
Voltage selected form V0 to V7
Hi-Z
Data Sheet S15953EJ2V0DS
Hi-Z
11
µPD160040B
(2) MODE = L
STB
High through rate period
SRC
Low through rate period
ORC
High output resistance period
Low output resistance period
POL
S2n–1
Voltage selected form V0 to V7
Voltage selected form V8 to V15
Voltage selected form V0 to V7
S2n
Voltage selected form V8 to V15
Hi-Z
12
Voltage selected form V0 to V7
Hi-Z
Data Sheet S15953EJ2V0DS
Voltage selected form V8 to V15
Hi-Z
µPD160040B
8. ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings (TA = 25°°C, VSS1 = VSS2 = 0 V)
Parameter
Symbol
Ratings
Unit
Logic part supply voltage
VDD1
–0.5 to + 4.0
V
Driver part supply voltage
VDD2
–0.5 to + 17.0
V
Logic part input voltage
VI1
–0.5 to VDD1 + 0.5
V
Driver part input voltage
VI2
–0.5 to VDD2 + 0.5
V
Logic part output voltage
VO1
–0.5 to VDD1 + 0.5
V
Driver part output voltage
VO2
–0.5 to VDD2 + 0.5
V
Operating ambient temperature
TA
–10 to + 75
°C
Storage temperature
Tstg
–55 to + 125
°C
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the
verge of suffering physical damage, and therefore the product must be used under conditions that
ensure that the absolute maximum ratings are not exceeded.
Recommended Operating Range (TA = –10 to +75°C, VSS1 = VSS2 = 0 V)
Parameter
Symbol
Logic part supply voltage
VDD1
Driver part supply voltage
VDD2
Condition
MIN.
TYP.
MAX.
3.6
V
12.5
13.0
(14.0)
V
(14.0)
15.0
15.5
V
VDD1
V
2.5
VSEL = H
VSEL = L or open
High-level input voltage
VIH
Low-level input voltage
VIL
0
0.3 VDD1
V
γ -corrected voltage
V0-V7
0.5 VDD2 + 0.5
VDD2 − 0.2
V
V8-V15
0.2
0.5 VDD2 − 0.5
V
0.2
Driver part output voltage
VO
Clock frequency
fCLK
0.7 VDD1
Unit
VDD2 − 0.2
V
3.0 V ≤ VDD1 ≤ 3.6 V
55
MHz
2.5 V ≤ VDD1 < 3.0 V
40
MHz
Remark The value enclosed in parentheses is a reference value.
Data Sheet S15953EJ2V0DS
13
µPD160040B
Electrical Characteristics (TA = –10 to +75°C, VDD1 = 2.5 to 3.6 V, VDD2 = 12.5 to 15.5 V, VSS1 = VSS2 = 0 V)
Parameter
Symbol
Condition
MIN.
Input leakage current
IIL
High-level output voltage
VOH
STHR (STHL), IOH = 0 mA
Low-level output voltage
VOL
STHR (STHL), IOL = 0 mA
γ -corrected resistance
Rγ
VDD2 = 15.0 V, V0-V7 = V8-V15 = 7.0 V
Driver output current
IVOH
VX = 12.0 V, VOUT = 11.0 V
IVOL
VX = 1.0 V, VOUT = 2.0 V
∆VO
TA = 25°C, VSS2 + 1.0 V to VDD2 − 1.0 V
Output voltage deviation
Output swing voltage difference ∆VP-P1
deviation
Logic part dynamic current
VDD1 = 3.3 V,
TYP.
MAX.
Unit
±1.0
µA
VDD1 − 0.1
V
0.1
6.5
13.0
Note1
Note1
VOUT = 7.0 to 8.0 V
19.5
kΩ
−0.40
mA
0.65
Note1
V
mA
±10
±20
mV
±5
±10
mV
mV
∆VP-P2
VDD2 = 15.0 V, VOUT = 4.0 to 11.0 V
Note1
±7
±15
∆VP-P3
TA = 25°C
Note1
±10
±20
mV
IDD1
VDD1
1.3
12
mA
IDD2
VDD2, with no load
12
30
mA
VOUT = 1.0 to 14.0 V
Notes 2, 3
consumption
Driver part dynamic current
Notes 3, 4
consumption
Notes 1. VX refers to the output voltage of analog output pins S1 to S384.
VOUT refers to the voltage applied to analog output pins S1 to S384
2. fSTB = 64 kHz, fCLK = 54 MHz
3. The TYP. values refer to an all black or all white input pattern. The MAX. Value refers to the measured
values in the dot checkerboard input pattern.
4. Refers to the current consumption per driver when cascades are connected under the assumption of SXGA
single-sided mounting (10 units).
Switching Characteristics (TA = −10 to +75°°C, VDD1 = 2.5 to 3.6 V, VDD2 = 12.5 to 15.5 V, VSS1 = VSS2 = 0 V)
Parameter
Symbol
Start pulse delay time
tPLH1
tPLH2
Driver output delay time
tPLH3
tPHL2
tPHL3
Input capacitance
Note
Condition
MIN.
TYP.
MAX.
Unit
CL = 15 pF, 3.0 V ≤ VDD1 ≤ 3.6 V
17
ns
CL = 15 pF, 2.5 V ≤ VDD1 < 3.0 V
24
ns
CL = 100 pF, RL = 10 kΩ
Note
Note
logic input, except STHR (STHL),
µs
µs
5
µs
10
µs
5
10
pF
10
15
pF
Note
CI1
5
10
TA = 25°C
CI2
STHR (STHL), TA = 25°C
Note tPLH2, tPHL2 refer to the arrival time from falling edge of STB to target voltage ±10%
tPLH3, tPHL3 refer to the arrival time from falling edge of STB to target voltage ±0.02 V (condition: VO = 3.0 V ↔12.0 V)
★ <Test Condition>
RL2
RL1
RL3
RL4
Measurement
point
RL5
Output
RLn = 2 kΩ
CL1
CL2
CL3
GND
14
Data Sheet S15953EJ2V0DS
CL4
CL5
CLn = 20 pF
µPD160040B
Timing Requirements (TA = −10 to +75°°C, VDD1 = 2.5 to 3.6 V, VSS1 = 0 V, tr = tf = 5.0 ns)
Parameter
Clock pulse width
Clock pulse high period
★
Symbol
PW CLK
PW CLK (H)
Condition
MIN.
TYP.
MAX.
Unit
3.0 V ≤ VDD1 ≤ 3.6 V
18
ns
2.5 V ≤ VDD1 < 3.0 V
25
ns
3.0 V ≤ VDD1 ≤ 3.6 V
4
ns
2.5 V ≤ VDD1 < 3.0 V
6
ns
Clock pulse low period
PW CLK (L)
4
ns
Data setup time
tSETUP1
0
ns
Data hold time
tHOLD1
4
ns
Start pulse setup time
tSETUP2
0
ns
Start pulse hold time
tHOLD2
4
ns
POL21, POL22 setup time
tSETUP3
0
ns
POL21, POL22 hold time
tHOLD3
4
ns
STB pulse width
PW STB
1.0
µs
Last data timing
tLDT
2
CLK
CLK-STB time
tCLK-STB
CLK ↑→ STB↑
4
ns
STB-CLK time
tSTB-CLK
STB ↑→ CLK↑
4
ns
Time between STB and start pulse
tSTB-STH
STB ↑→ STHR (STHL) ↑
2
CLK
POL-STB time
tPOL-STB
POL ↑ or ↓→ STB ↑
4
ns
STB-POL time
tSTB-POL
STB ↓→ POL ↓ or ↑
4
ns
STB-SRC time
tSTB-SRC
STB ↑ → SRC ↑
0
ns
STB-ORC time
tSTB-ORC
STB ↑ → ORC ↑
0
ns
Remark Unless otherwise specified, the input level is defined to be VIH = 0.7 VDD1, VIL = 0.3 VDD1.
Data Sheet S15953EJ2V0DS
15
64
65
66
641
tCLK-STB
tHOLD2
VDD1
90 %
642
10 %
tSTB-CLK
VSS1
tSETUP1
INVALID
D1 to D6
tHOLD1
D7 to D12
tSETUP3
POL21,
POL22
VSS1
VDD1
STHR
(1st Dr.)
Dn0 to Dn7
tf
tSTB-STH
D373 to
D378
D379 to
D384
D385 to
D390
VDD1
D3835 to
D3840
INVALID
D1 to D6
D7 to D12
VSS1
tHOLD3
VDD1
INVALID
INVALID
VSS1
tPLH1
Data Sheet S15953EJ2V0DS
VDD1
STHL
(1st Dr.)
VSS1
tLDT
PWSTB
VDD1
STB
VSS1
tSTB-SRC
tSTB-ORC
VDD1
SRC, ORC
VSS1
tPOL-STB
tSTB-POL
VDD1
POL
VSS1
tPLH3
tPLH2
tPHL2
tPHL3
µPD160040B
Sn
(Vx)
Switching Characteristic Waveform
3
tr
2
(1) R,/L= H, MODE = H or open
tSETUP2
2
1
Unless otherwise specified, VIH, VIL are defined to be VIH = 0.7 VDD1, VIL = 0.3 VDD1 (numbers clock and display data
1
CLK
PWCLK(H)
are example when in SXGA).
16
PWCLK(L) PWCLK
3
64
65
66
641
tCLK-STB
10 %
tSTB-CLK
VSS1
tSETUP1
INVALID
D1 to D6
tHOLD1
D7 to D12
tSETUP3
POL21,
POL22
VSS1
VDD1
STHR
(1st Dr.)
Dn0 to Dn7
tf
VDD1
90 %
642
tHOLD2
tr
2
tSTB-STH
D373 to
D378
D379 to
D384
D385 to
D390
VDD1
D3835 to
D3840
INVALID
D1 to D6
D7 to D12
VSS1
tHOLD3
VDD1
INVALID
INVALID
VSS1
tPLH1
Data Sheet S15953EJ2V0DS
VDD1
STHL
(1st Dr.)
VSS1
tLDT
PWSTB
VDD1
STB
VSS1
tSTB-SRC
tSTB-ORC
VDD1
SRC, ORC
VSS1
tPOL-STB
tSTB-POL
VDD1
POL
VSS1
tPLH3
Hi-Z
tPLH2
tPHL2
tPHL3
17
µPD160040B
Sn
(Vx)
(2) R,/L= H, MODE = L
tSETUP2
2
1
Unless otherwise specified, VIH, VIL are defined to be VIH = 0.7 VDD1, VIL = 0.3 VDD1 (Numbers clock and display data
1
CLK
PWCLK(H)
are example when in SXGA).
PWCLK(L) PWCLK
µPD160040B
9. RECOMMENDED MOUNTING CONDITIONS
The following conditions must be met for mounting conditions of the µPD160040B.
For more details, refer to the Semiconductor Device Mounting Technology Manual (C10535E).
Please consult with our sales offices in case other mounting process is used, or in case the mounting is done under
different conditions.
µPD160040BN-xxx: TCP (TAB Package)
Mounting Condition
Thermocompression
Mounting Method
Condition
Soldering
Heating tool 300 to 350°C, heating for 2 to 3 sec, pressure 100g (per
ACF
Temporary bonding 70 to 100°C, pressure 3 to 8 kg/cm2, time 3 to 5
(Adhesive Conductive
sec. Real bonding 165 to 180°C pressure 25 to 45 kg/cm2, time 30 to
Film)
40 sec. (When using the anisotropy conductive film SUMIZAC1003 of
solder).
Sumitomo Bakelite, Ltd.)
Caution To find out the detailed conditions for mounting the ACF part, please contact the ACF
manufacturing company. Be sure to avoid using two or more mounting methods at a time.
18
Data Sheet S15953EJ2V0DS
µPD160040B
NOTES FOR CMOS DEVICES
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note:
Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and
ultimately degrade the device operation. Steps must be taken to stop generation of static electricity
as much as possible, and quickly dissipate it once, when it has occurred. Environmental control
must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using
insulators that easily build static electricity. Semiconductor devices must be stored and transported
in an anti-static container, static shielding bag or conductive material. All test and measurement
tools including work bench and floor should be grounded. The operator should be grounded using
wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need
to be taken for PW boards with semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note:
No connection for CMOS device inputs can be cause of malfunction. If no connection is provided
to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence
causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels
of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused
pin should be connected to V DD or GND with a resistor, if it is considered to have a possibility of
being an output pin. All handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note:
Power-on does not necessarily define initial status of MOS device. Production process of MOS
does not define the initial operation status of the device. Immediately after the power source is
turned ON, the devices with reset function have not yet been initialized. Hence, power-on does
not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the
reset signal is received. Reset operation must be executed immediately after power-on for devices
having reset function.
Data Sheet S15953EJ2V0DS
19
µPD160040B
Reference Documents
NEC Semiconductor Device Reliability/Quality Control System (C10983E)
Quality Grades On NEC Semiconductor Devices (C11531E)
• The information in this document is current as of January, 2003. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1