2SC4499(L)/(S) Silicon NPN Triple Diffused ADE-208-893 (Z) 1st. Edition Sep. 2000 Application High speed and high voltage switching Outline DPAK 4 4 1 2 3 S Type 12 3 L Type 1. Base 2. Collector 3. Emitter 4. Collector 2SC4499(L)/(S) Absolute Maximum Ratings (Ta = 25°C) Item Symbol Ratings Unit Collector to base voltage VCBO 500 V Collector to emitter voltage VCEO 400 V Emitter to base voltage VEBO 10 V Collector current IC 0.5 A Collector peak current I C(peak) 1.0 A Collector power dissipation PC 0.75 W PC * 1 10 Junction temperature Tj 150 °C Storage temperature Tstg –55 to +150 °C Note: 1. Value at TC = 25°C. Electrical Characteristics (Ta = 25°C) Item Symbol Min Typ Max Unit Test conditions Collector to emitter sustain voltage VCEO(sus) 400 — — V I C = 0.1 A, RBE = ∞ L = 100 mH Emitter to base breakdown voltage V(BR)EBO 10 — — V I E = 10 mA, IC = 0 Collector cutoff current I CBO — — 20 µA VCB = 400 V, IE = 0 I CEO — — 50 VCE = 350 V, RBE = ∞ hFE1 12 — — VCE = 5 V, IC = 0.25 A*1 hFE2 5 — — VCE = 5 V, IC = 0.5 A*1 Collector to emitter saturation voltage VCE(sat) — — 1.0 V I C = 0.25 A, IB = 0.05 A*1 Base to emitter saturation voltage VBE(sat) — — 1.5 V I C = 0.25 A, IB = 0.05 A*1 Turn on time t on — — 1.0 µs I C = 0.5 A, IB1 = –IB2 = 0.1 A, Storage time t stg — — 2.0 µs VCC ≅ 150 V Fall time tf — — 1.0 µs DC current transfer ratio Note: 2 1. Pulse test. 2SC4499(L)/(S) Maximum Collector Dissipation Curve Area of Safe Operation Collector current IC (A) 10 8 4 1.0 0.1 Ta = 25°C, 1 Shot 0.01 µs 25 s µ ) s 50 ms 5°C 0µ =2 25 =1 (T C PW tio n era Op DC Collector power dissipation PC (W) 12 0.001 0 50 100 Case temperature TC (°C) 1 150 3 10 30 100 300 1,000 Collector to emitter voltage VCE (V) Transient Thermal Resistance 10 Collector Current Derating Rate 80 IS /B 60 Thermal resistance θj-c (°C/W) Collector current derating rate (%) 100 Lim it A re a 40 20 0 50 100 Case temperature TC (°C) 150 10 ms–10 s 3 1.0 s 0m s–1 10 µ 0.3 0.1 0.03 TC = 25°C 0.01 0.01 0.1 0.01 0.1 1.0 10 (s) 1.0 10 (ms) Time t 3 2SC4499(L)/(S) Collector to Emitter Voltage vs. Base to Emitter Resistance Reverse Bias Area of Safe Operation 350 V, 1 A 0.8 0.6 400 V, 0.5 A 0.4 0.2 IB2 = –0.1 A 450 V, 0.1 A 200 300 400 500 100 Collector to emitter voltage VCE (V) 0 600 Collector to emitter voltage VCER (V) Collector current IC (A) 1.0 IC = 1 mA 500 400 300 100 Typical Output Characteristics Typical Transfer Characteristics 0.4 0.3 0.2 1.0 Collector current IC (A) Collector current IC (A) 0.5 50 40 30 20 10 5 mA 0.1 TC = 25°C 10 k 100 k 1M 1k Base to emitter resistance RBE (Ω) VCE = 5 V Ta = 25°C 0.8 0.6 0.4 0.2 IB = 0 0 4 1 2 3 4 5 Collector to emitter voltage VCE (V) 0 1.2 1.6 2.0 0.4 0.8 Base to emitter voltage VBE (V) 2SC4499(L)/(S) DC Current Transfer Ratio vs. Collector Current Collector to Emitter Saturation Voltage vs. Base Current Collector to emitter saturation voltage VCE(sat) (V) DC current transfer ratio hFE 100 30 10 3 VCE = 5 V Ta = 25°C 1.0 3 1.0 0.2 A 0.3 0.1 A 0.1 IC = 0.05 A 0.03 Ta = 25°C 0.01 0.001 0.003 0.01 0.03 0.1 0.3 1.0 Base current IB (A) Switching Time vs. Collector Current Saturation Voltage vs. Collector Current 10 10 IC = 5 IB 1.0 VBE(sat) 0.3 0.1 0.03 tstg 3 3 Switching time t (µs) Collector to emitter saturation voltage VCE(sat) (V) Base to emitter saturation voltage VBE(sat) (V) 1 0.001 0.003 0.01 0.03 0.1 0.3 Collector current IC (A) 10 VCE(sat) tf 0.3 0.1 0.03 Ta = 25°C 0.01 0.001 0.003 0.01 0.03 0.1 0.3 Collector current IC (A) 1.0 1.0 ton VCC = 150 V IC = 5 IB1 = –5 IB2 0.01 0.001 0.003 0.01 0.03 0.1 0.3 Collector current IC (A) 1.0 5 2SC4499(L)/(S) Switching Time vs. Case Temperature 5 Switching time t (µs) 3 tstg 1.0 tf ton 0.3 IC = 0.5 A IB1 = – IB2 = 0.1 A RL = 300 Ω VCC = 150 V 0.1 0.05 0 6 25 50 75 100 Case temperature TC (°C) 125 2SC4499(L)/(S) Package Dimensions 1.7 ± 0.5 Unit: mm 2.3 ± 0.2 0.55 ± 0.1 5.5 ± 0.5 6.5 ± 0.5 5.4 ± 0.5 3.1 ± 0.5 1.15 ± 0.1 0.8 ± 0.1 2.29 ± 0.5 16.2 ± 0.5 1.2 ± 0.3 2.29 ± 0.5 0.55 ± 0.1 Hitachi Code JEDEC EIAJ Mass (reference value) DPAK (L)-(1) — Conforms 0.42 g 2.3 ± 0.2 0.55 ± 0.1 (4.9) (5.3) 6.5 ± 0.5 5.4 ± 0.5 1.2 Max 5.5 ± 0.5 1.7 ± 0.5 Unit: mm 0 – 0.25 2.5 ± 0.5 1.15 ± 0.1 0.8 ± 0.1 2.29 ± 0.5 0.55 ± 0.1 2.29 ± 0.5 Hitachi Code JEDEC EIAJ Mass (reference value) DPAK (S)-(1) — Conforms 0.28 g 7 2SC4499(L)/(S) Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica Europe Asia Japan : : : : http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Straβe 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160 Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk Copyright Hitachi, Ltd., 2000. All rights reserved. Printed in Japan. Colophon 2.0 8