FAIRCHILD FDW2515N

FDW2515NZ
Common Drain N-Channel 2.5V specified PowerTrench MOSFET
General Description
Features
This N-Channel 2.5V specified MOSFET is a rugged
gate version of Fairchild's Semiconductor’s advanced
PowerTrench process. It has been optimized for power
management applications with a wide range of gate
drive voltage (2.5V – 12V).
• 5.8 A, 20 V
• Extended VGSS range (±12V) for battery applications
Applications
• ESD protection diode (note 3)
• Li-Ion Battery Pack
• High performance trench technology for extremely
low RDS(ON) @ VGS = 2.5 V
RDS(ON) = 28 mΩ @ VGS = 4.5 V
RDS(ON) = 38 mΩ @ VGS = 2.5 V
• Low profile TSSOP-8 package
G2
S2
S2
D2
G1
S1
S1
D1
TSSOP-8
Pin 1
Absolute Maximum Ratings
Symbol
TA=25oC unless otherwise noted
Ratings
Units
VDSS
Drain-Source Voltage
Parameter
20
V
VGSS
Gate-Source Voltage
±12
V
ID
Drain Current
5.8
A
– Continuous
(Note 1a)
– Pulsed
20
Power Dissipation for Single Operation
PD
TJ, TSTG
(Note 1a)
1.6
(Note 1b)
1.1
Operating and Storage Junction Temperature Range
–55 to +150
W
°C
Thermal Characteristics
RθJA
Thermal Resistance, Junction-to-Ambient
(Note 1a)
77
°C/W
RθJA
Thermal Resistance, Junction-to-Ambient
(Note 1b)
114
°C/W
Package Marking and Ordering Information
Device Marking
Device
Reel Size
Tape width
Quantity
2515NZ
FDW2515NZ
13’’
12mm
3000 units
2003 Fairchild Semiconductor Corporation
FDW2515NZ Rev C
FDW2515NZ
February 2003
Symbol
Parameter
TA = 25°C unless otherwise noted
Test Conditions
Min
Typ
Max Units
Off Characteristics
ID = 250 µA
20
V
BVDSS
∆BVDSS
∆TJ
IDSS
Drain–Source Breakdown Voltage
Breakdown Voltage Temperature
Coefficient
Zero Gate Voltage Drain Current
ID = 250 µA, Referenced to 25°C
VDS = 16 V,
VGS = 0 V
1
µA
IGSS
Gate–Body Leakage
VGS = ±12 V,
VDS = 0 V
±10
µA
1.5
V
On Characteristics
VGS = 0 V,
10
mV/°C
(Note 2)
ID = 250 µA
0.6
1.0
VGS(th)
Gate Threshold Voltage
VDS = VGS,
∆VGS(th)
∆TJ
RDS(on)
Gate Threshold Voltage
Temperature Coefficient
Static Drain–Source
On–Resistance
ID = 250 µA, Referenced to 25°C
–0.3
VGS = 4.5 V,
ID = 5.8 A
ID = 5.0 A
VGS = 2.5 V,
VGS = 4.5 V, ID = 5.8 A, TJ=125°C
22
29
29
ID(on)
On–State Drain Current
VGS = 4.5 V,
VDS = 5 V
gFS
Forward Transconductance
VDS = 5 V,
ID = 5.8 A
VDS = 10 V,
f = 1.0 MHz
V GS = 0 V,
VGS = 15 mV,
f = 1.0 MHz
VDD = 10 V,
VGS = 4.5 V,
ID = 1 A,
RGEN = 6 Ω
9
17
6
11
Ns
mV/°C
28
38
40
10
mΩ
A
25
S
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
RG
Gate Resistance
Switching Characteristics
745
pF
205
pF
115
pF
1.6
Ω
(Note 2)
td(on)
Turn–On Delay Time
tr
Turn–On Rise Time
td(off)
Turn–Off Delay Time
15
28
Ns
tf
Turn–Off Fall Time
8
16
Ns
Qg
Total Gate Charge
9
12
Qgs
Gate–Source Charge
Qgd
Gate–Drain Charge
VDS = 10 V,
VGS = 5 V
ID = 5.8 A,
Ns
nC
1.5
nC
2.4
nC
FDW2515NZ Rev C
FDW2515NZ
Electrical Characteristics
Symbol
TA = 25°C unless otherwise noted
Parameter
Test Conditions
Min
Typ
Max Units
Drain–Source Diode Characteristics and Maximum Ratings
IS
VSD
trr
Qrr
Maximum Continuous Drain–Source Diode Forward Current
Drain–Source Diode Forward
VGS = 0 V, IS = 1.3 A
Voltage
Diode Reverse Recovery Time
IF = 5.8 A
diF/dt = 100 A/µs
Diode Reverse Recovery Charge
0.7
(Note 2)
(Note 2)
1.3
A
1.2
V
17
nS
5
nC
Notes:
1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of
the drain pins. RθJC is guaranteed by design while RθCA is determined by the user's board design.
a)
77°C/W when
mounted on a 1in2 pad
of 2 oz copper
b)
114°C/W when mounted
on a minimum pad of 2 oz
copper
Scale 1 : 1 on letter size paper
2. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0%
3. The diode connected between the gate and source serves only as protection against ESD. No gate overvoltage rating is implied.
FDW2515NZ Rev C
FDW2515NZ
Electrical Characteristics
FDW2515NZ
Typical Characteristics
20
2.4
2.5V
RDS(ON), NORMALIZED
DRAIN-SOURCE ON-RESISTANCE
ID, DRAIN CURRENT (A)
VGS = 10.0V
16
4.5V
3.0V
12
2.0V
8
4
1.5V
0.5
1
2
1.6
2.5V
3.0V
3.5V
1.2
4.5V
6.0V
10.0V
0.8
0
0
VGS = 2.0V
1.5
0
2
4
Figure 1. On-Region Characteristics.
16
20
0.07
ID = 5.8A
VGS = 4.5V
ID = 2.9A
RDS(ON), ON-RESISTANCE (OHM)
RDS(ON), NORMALIZED
DRAIN-SOURCE ON-RESISTANCE
12
Figure 2. On-Resistance Variation with
Drain Current and Gate Voltage.
1.6
1.4
1.2
1
0.8
-50
-25
0
25
50
75
100
125
0.06
0.05
0.04
o
TA = 125 C
0.03
TA = 25oC
0.02
0.01
150
0
2
o
TJ, JUNCTION TEMPERATURE ( C)
4
6
8
10
VGS, GATE TO SOURCE VOLTAGE (V)
Figure 3. On-Resistance Variation with
Temperature.
Figure 4. On-Resistance Variation with
Gate-to-Source Voltage.
20
100
VGS = 0V
IS, REVERSE DRAIN CURRENT (A)
VDS = 5V
ID, DRAIN CURRENT (A)
8
ID, DRAIN CURRENT (A)
VDS, DRAIN-SOURCE VOLTAGE (V)
16
12
8
o
TA = 125 C
25o
4
125oC
10
TA = 125oC
1
0.1
25oC
0.01
-55oC
0.001
0.0001
0
0.5
1
1.5
2
VGS, GATE TO SOURCE VOLTAGE (V)
Figure 5. Transfer Characteristics.
2.5
0
0.2
0.4
0.6
0.8
1
1.2
VSD, BODY DIODE FORWARD VOLTAGE (V)
Figure 6. Body Diode Forward Voltage Variation
with Source Current and Temperature.
FDW2515NZ Rev C
FDW2515NZ
Typical Characteristics
1200
ID = 5.8A
f = 1MHz
VGS = 0 V
VDS = 5V
8
900
CAPACITANCE (pF)
VGS, GATE-SOURCE VOLTAGE (V)
10
10V
6
15V
4
Ciss
600
Coss
300
2
Crss
0
0
0
5
10
15
20
0
4
Qg, GATE CHARGE (nC)
Figure 7. Gate Charge Characteristics.
12
16
20
Figure 8. Capacitance Characteristics.
50
100
P(pk), PEAK TRANSIENT POWER (W)
RDS(ON) LIMIT
100us
1ms
10
10ms
100ms
1s
10s
DC
1
VGS = 4.5V
SINGLE PULSE
RθJA = 114oC/W
0.1
TA = 25oC
0.1
1
10
SINGLE PULSE
RθJA = 114°C/W
TA = 25°C
40
30
20
10
0.01
0
0.001
100
0.01
0.1
1
10
100
1000
t1, TIME (sec)
VDS, DRAIN-SOURCE VOLTAGE (V)
Figure 9. Maximum Safe Operating Area.
r(t), NORMALIZED EFFECTIVE TRANSIENT
THERMAL RESISTANCE
ID, DRAIN CURRENT (A)
8
VDS, DRAIN TO SOURCE VOLTAGE (V)
Figure 10. Single Pulse Maximum
Power Dissipation.
1
D = 0.5
RθJA(t) = r(t) * RθJA
RθJA =114 °C/W
0.2
0.1
0.1
0.05
P(pk)
0.02
0.01
t1
0.01
t2
TJ - TA = P * RθJA(t)
Duty Cycle, D = t1 / t2
SINGLE PULSE
0.001
0.0001
0.001
0.01
0.1
1
10
100
1000
t1, TIME (sec)
Figure 11. Transient Thermal Response Curve.
Thermal characterization performed using the conditions described in Note 1b.
Transient thermal response will change depending on the circuit board design.
FDW2515NZ Rev C
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
FACT™
ActiveArray™
FACT Quiet Series™
Bottomless™
FASTâ
CoolFET™
FASTr™
CROSSVOLT™ FRFET™
DOME™
GlobalOptoisolator™
EcoSPARK™
GTO™
E2CMOSTM
HiSeC™
EnSignaTM
I2C™
Across the board. Around the world.™
The Power Franchise™
Programmable Active Droop™
ImpliedDisconnect™ PACMAN™
POP™
ISOPLANAR™
Power247™
LittleFET™
PowerTrenchâ
MicroFET™
QFET™
MicroPak™
QS™
MICROWIRE™
QT Optoelectronics™
MSX™
Quiet Series™
MSXPro™
RapidConfigure™
OCX™
RapidConnect™
OCXPro™
SILENT SWITCHERâ
OPTOLOGICâ
SMART START™
OPTOPLANAR™
SPM™
Stealth™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogicâ
TruTranslation™
UHC™
UltraFETâ
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
2. A critical component is any component of a life
1. Life support devices or systems are devices or
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I2