Order this document by MPSH24/D SEMICONDUCTOR TECHNICAL DATA NPN Silicon COLLECTOR 3 1 BASE 2 EMITTER MAXIMUM RATINGS Rating Symbol Value Unit Collector – Emitter Voltage VCEO 30 Vdc Collector – Base Voltage VCBO 40 Vdc Emitter – Base Voltage VEBO 4.0 Vdc Collector Current – Continuous IC 50 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 350 2.8 mW mW/°C TJ, Tstg – 55 to +135 °C Characteristic Symbol Max Unit Thermal Resistance, Junction to Ambient RqJA 357 °C/W Operating and Storage Junction Temperature Range 1 2 3 CASE 29–04, STYLE 2 TO–92 (TO–226AA) THERMAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Typ Max Unit Collector – Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) V(BR)CEO 30 — — Vdc Collector – Base Breakdown Voltage (IC = 100 mAdc, IE = 0) V(BR)CBO 40 — — Vdc Emitter – Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO 4.0 — — Vdc ICBO — — 50 nAdc hFE 30 — — — fT 400 620 — MHz Collector–Base Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Ccb — 0.25 0.36 pF Conversion Gain (213 MHz to 45 MHz) (IC = 8.0 mAdc, VCC = 20 Vdc, Oscillator Injection = 150 mVrms) (60 MHz to 45 MHz) (IC = 8.0 mAdc, VCC = 20 Vdc, Oscillator Injection = 150 mVrms) GC Characteristic OFF CHARACTERISTICS Collector Cutoff Current (VCB = 15 Vdc, IE = 0) ON CHARACTERISTICS DC Current Gain (IC = 8.0 mAdc, VCE = 10 Vdc) SMALL– SIGNAL CHARACTERISTICS Current – Gain — Bandwidth Product (IC = 8.0 mAdc, VCE = 10 Vdc, f = 100 MHz) Motorola Small–Signal Transistors, FETs and Diodes Device Data Motorola, Inc. 1996 dB 19 24 — 24 29 — 1 MPSH24 CONVERSION GAIN CHARACTERISTICS (TEST CIRCUIT FIGURE 7) (VCC = 20 Vdc, RS = RL = 50 Ohms, fif = 44 MHz, B.W. = 6.0 MHz) 40 fsig = 60 MHz, fosc = 10 MHz 30 G PC , CONVERSION GAIN (dB) G PC , CONVERSION GAIN (dB) 40 fsig = 213 MHz, fosc = 275 MHz 20 10 Osc Inj = 150 mVrms fsig = 60 MHz, fosc = 104 MHz 30 20 fsig = 213 MHz, fosc = 275 MHz 10 IC = 8.0 mAdc 0 0 0 2.0 4.0 6.0 8.0 10 12 14 16 0 100 200 300 400 IC, COLLECTOR CURRENT (mAdc) Vi, OSCILLATOR INJECTION (mV) Figure 1. Conversion Gain versus Collector Current Figure 2. Conversion Gain versus Injection Level COMMON–EMITTER y PARAMETERS y re , REVERSE TRANSFER ADMITTANCE (mmhos) (VCE = 15 Vdc, TA = 25°C) y ie , INPUT ADMITTANCE (mmhos) 50 213 MHz 60 MHz 40 gie 30 20 gie bie 10 bie 0 2 2.0 4.0 6.0 8.0 10 12 14 16 18 f = 45 MHz 0.08 –bre 0.06 gre < –0.01 mmho 0.04 0.02 0 20 0 2.0 4.0 6.0 8.0 10 12 14 16 18 IC, COLLECTOR CURRENT (mAdc) IC, COLLECTOR CURRENT (mAdc) Figure 3. Input Admittance Figure 4. Reverse Transfer Admittance 20 0.8 200 f = 45 MHz yoe , OUTPUT ADMITTANCE (mmhos) y fe , FORWARD TRANSFER ADMITTANCE (mmhos) 0 0.1 160 120 80 gfe bfe 40 f = 45 MHz 0.6 goe 0.4 boe 0.2 0 0 0 2.0 4.0 6.0 8.0 10 12 14 16 18 20 0 2.0 4.0 6.0 8.0 10 12 14 16 IC, COLLECTOR CURRENT (mAdc) IC, COLLECTOR CURRENT (mAdc) Figure 5. Forward Transfer Admittance Figure 6. Output Admittance 18 20 Motorola Small–Signal Transistors, FETs and Diodes Device Data MPSH24 fsig fosc C1 60 MHz 213 MHz 105 MHz 1.5–20 pF 258 MHz 1.5–20 pF C2 8.0–60 pF 6.0–12 pF C3 8.0–60 pF 3.0–35 pF 1.5–20 pF — C4 C5 L1 — 1.5–20 pF 3 Turns #16 5 Turns #26 Air, Tap 1 Turn Air, Tap 1/2 Turn L2 10 Turns #26 Air L3 Ohmite Z235 fsig INPUT C1 10 dB fosc 0.002 mF C4 L1 10 dB RL = 50 W L2 C2 C3 10 dB 470 pF 5.6 mH 470 pF 470 pF 10 Turns #26 Arnold A1–10 Core –VEE L3 5.6 mH 60 MHz TRAP 10 k C5 470 pF +20 V — Figure 7. VHF Mixer Test Circuit (fif = 44 MHz, B.W. = 6.0 MHz) Motorola Small–Signal Transistors, FETs and Diodes Device Data 3 MPSH24 PACKAGE DIMENSIONS A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L F SEATING PLANE K DIM A B C D F G H J K L N P R V D J X X G H V C 1 SECTION X–X N N CASE 029–04 (TO–226AA) ISSUE AD INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.115 ––– 0.135 ––– MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 2.93 ––– 3.43 ––– STYLE 2: PIN 1. BASE 2. EMITTER 3. COLLECTOR Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 MFAX: [email protected] – TOUCHTONE 602–244–6609 INTERNET: http://Design–NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 4 ◊ *MPSH24/D* MPSH24/D Motorola Small–Signal Transistors, FETs and Diodes Device Data