DISCRETE SEMICONDUCTORS DATA SHEET M3D159 LLE18300X NPN microwave power transistor Product specification Supersedes data of September 1994 1999 Apr 22 Philips Semiconductors Product specification NPN microwave power transistor LLE18300X FEATURES QUICK REFERENCE DATA Diffused emitter ballasting resistors providing excellent current sharing and withstanding a high VSWR • Interdigitated structure provides high emitter efficiency Microwave performance up to Tmb = 25 °C in a common emitter class AB amplifier. • Gold metallization realizes very good stability of the characteristics and excellent lifetime • Multicell geometry gives good balance of dissipated power and low thermal resistance • Internal input and output prematching ensures good stability and allows an easier design of wideband circuits. MODE OF OPERATION f (GHz) Class AB (CW) 1.85 VCE (V) 24 ICQ (A) 0.1 PL1 (W) ≥27 ηC (%) Gpo (dB) ≥7.8 Zi; ZL (Ω) typ. 40 see Figs 8 and 9 PINNING - SOT437A PIN DESCRIPTION 1 collector 2 base 3 emitter connected to flange APPLICATION Intended for use in common emitter, class AB amplifiers in CW conditions for professional applications between 1.7 GHz and 2 GHz. handbook, 4 columns 1 c b 3 e DESCRIPTION 2 NPN silicon planar epitaxial microwave power transistor in an SOT437A glued cap metal ceramic flange package, with emitter connected to flange. Top view MAM112 Fig.1 Simplified outline and symbol. WARNING Product and environmental safety - toxic materials This product contains beryllium oxide. The product is entirely safe provided that the BeO disc is not damaged. All persons who handle, use or dispose of this product should be aware of its nature and of the necessary safety precautions. After use, dispose of as chemical or special waste according to the regulations applying at the location of the user. It must never be thrown out with the general or domestic waste. 1999 Apr 22 2 Philips Semiconductors Product specification NPN microwave power transistor LLE18300X LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT 45 V VCBO collector-base voltage open emitter − VCER collector-emitter voltage RBE = 220 Ω − 30 V VCEO collector-emitter voltage open base − 15 V VEBO emitter-base voltage open collector − 3 V IC collector current (DC) − 6 A Pi input power f = 1.85 GHz; VCE = 24 V; class AB − 8 W Ptot total power dissipation Tmb = 75 °C 50 W Tstg storage temperature −65 +150 °C Tj junction temperature − 200 °C Tsld soldering temperature − 235 °C − t ≤ 10 s; 1 Note 1. Up to 0.2 mm from ceramic. MBD734 10 MEA577 60 P tot IC (W) (A) 40 Ι ΙΙ 1 20 10 1 1 10 VCE (V) 0 10 2 0 50 100 150 200 T mb ( o C) Tmb ≤ 75 °C. (I) Region of permissible DC operation. (II) Permissible extension provided RBE ≤ 220 Ω. Fig.2 DC SOAR. 1999 Apr 22 Fig.3 Power derating curve. 3 Philips Semiconductors Product specification NPN microwave power transistor LLE18300X THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS Rth j-mb thermal resistance from junction to mounting base Rth mb-h thermal resistance from mounting base to heatsink MAX. Tj = 100 °C UNIT 2 K/W 0.2 K/W CHARACTERISTICS Tmb = 25 °C unless otherwise specified. SYMBOL PARAMETER ICBO collector cut-off current CONDITIONS MIN. MAX. UNIT IE = 0; VCB = 20 V − 3 mA V(BR)CER collector-emitter breakdown voltage IC = 15 mA; RBE = 220 Ω 30 − V V(BR)CBO collector-base breakdown voltage IC = 15 mA 45 − V V(BR)EBO emitter-base breakdown voltage IE = 15 mA 3 − V hFE DC current gain IC = 1 A; VCE = 3 V 15 100 APPLICATION INFORMATION Microwave performance up to Tmb = 25 °C in a common emitter class AB amplifier. MODE OF OPERATION f (GHz) Class AB (CW) 1.85 1999 Apr 22 ICQ (A) VCE (V) 24 PL1 (W) ≥27 typ. 30 0.1 4 Gpo (dB) ≥7.8 typ. 8.6 ηC (%) typ. 40 Zi; ZL (Ω) see Figs 8 and 9 Philips Semiconductors Product specification NPN microwave power transistor LLE18300X 30 handbook, full pagewidth 30 1.5 5.0 0.8 9.7 3.0 5.0 5.0 3.0 4.0 5.0 14.2 2.0 0.8 2.5 40 0.7 handbook, full pagewidth 2.5 2.5 5.0 6.0 , V BB C5 40 2.0 3.0 0.7 4.5 3.0 1.8 1.2 MEA598 VCC C6 F1 input L2 L1 C4 C1 C2 output C3 Rr MEA599 The test circuit is split into two independent halves, each being 30 x 40 mm in size. Dimensions in mm. Substrate: Epsilam 10. Thickness: 0.635 mm. Permittivity: εr = 10. Fig.4 Prematching test circuit board. 1999 Apr 22 5 Philips Semiconductors Product specification NPN microwave power transistor LLE18300X PREMATCHING TEST CIRCUIT handbook, full pagewidth BIAS CIRCUIT VCC R1 C6 TR1 C5 R2 F1 P1 D1 R3 L2 C7 L1 DUT D2 MEA600 Fig.5 Class AB bias circuit. List of components (see Figs 4 and 5). COMPONENT DESCRIPTION VALUE ORDERING INFORMATION TR1 transistor, BDT91 or equivalent C1, C4 DC blocking chip capacitor 100 pF ATC 100A101kp C2, C3 trimmer capacitor 0.5 to 5.0 pF Tekelec 727-1 C5, C6 feedthrough bypass capacitor 1500 pF Erie 1250-003 C7 electrolytic capacitor 10 µF, >30 V D1 diode BY239 or equivalent; 1 D2 diode BY239 or equivalent; 2 L1 4 turns 0.5 mm copper wire; internal diameter = 2 mm L2 3 turns 0.5 mm copper wire; internal diameter = 2 mm P1 linear potentiometer 4.7 kΩ R1 resistor 100 Ω, 0.25 W R2 resistor 10 kΩ, 0.25 W R3 resistor 56 Ω, 0.25 W F1 ferrite bead Rr copper rivet Philips tube, 12NC = 4330 030 43081 4.2 x 2.2 x 3.2 mm (4B1) Notes 1. In thermal contact with TR1. 2. In thermal contact with DUT. 1999 Apr 22 6 Philips Semiconductors Product specification NPN microwave power transistor LLE18300X MEA579 40 MBD733 20 handbook, halfpage handbook, halfpage d im (dBc) PL (W) I CQ = 10 mA 25 30 I CQ = 100 mA 50 mA 10 mA 20 30 50 mA 35 100 mA 10 40 45 0 0 2 4 P i (W) 0 6 5 10 15 20 Po (av) (W) VCE = 24 V; f1 = 1850 MHz; f2 = 1850.2 MHz. VCE = 24 V; f = 1850 MHz. Fig.7 Fig.6 Load power as a function of input power. Intermodulation distortion as a function of average output power. Input and optimum load impedances. VCE = 24 V; ICQ = 0.1 A; Zo = 10 Ω (see Figs 8 and 9); typical values at PL = PL1. f (GHz) Zi (Ω) ZL (Ω) 1.70 5.6 + j4.0 3.0 - j1.6 1.75 6.4 + j2.7 2.7 - j1.7 1.80 6.3 + j1.1 2.4 - j1.8 1.85 5.5 + j0.2 2.2 - j1.9 1.90 4.4 − j0.8 2.0 - j2.1 1.95 3.4 - j1.0 1.8 - j2.3 2.00 2.6 - j0.8 1.7 - j2.5 1999 Apr 22 7 Philips Semiconductors Product specification NPN microwave power transistor LLE18300X 1 handbook, full pagewidth 0.5 2 0.2 5 1.7 GHz 10 +j 0 0.2 0.5 1 2 5 ∞ 10 1.85 GHz –j 2 GHz 10 Zi 5 0.2 2 0.5 MBD735 1 VCE = 24 V; Zo = 10 Ω; ICQ = 0.1 A. Fig.8 Input impedance as a function of frequency; typical values at PL = PL1. 1 handbook, full pagewidth 0.5 2 0.2 5 10 +j 0 0.2 0.5 1 2 5 ∞ 10 1.7 GHz –j 10 1.85 GHz ZL 0.2 2 GHz 5 2 0.5 1 MBD736 VCE = 24 V; Zo = 10 Ω; ICQ = 0.1 A. Fig.9 Optimum load impedance as a function of frequency; typical values at PL = PL1. 1999 Apr 22 8 Philips Semiconductors Product specification NPN microwave power transistor LLE18300X PACKAGE OUTLINE Flanged ceramic package; 2 mounting holes; 2 leads SOT437A D A F 3 D1 U1 B q C c 1 H U2 E E1 A w1 M A M B M p 2 w2 M C M b 0 Q 5 10 mm scale DIMENSIONS (millimetre dimensions are derived from the original inch dimensions) UNIT A b c D D1 E E1 F H p Q q U1 U2 w1 w2 mm 4.98 4.32 1.66 1.40 0.13 0.08 6.48 6.22 6.48 6.22 6.48 6.22 6.48 6.22 1.65 1.40 17.02 16.00 3.43 3.18 2.29 2.03 14.22 19.02 18.77 6.48 6.22 0.25 0.51 0.196 0.065 0.005 0.170 0.055 0.003 0.255 0.245 0.255 0.255 0.245 0.245 0.255 0.065 0.245 0.055 0.67 0.63 0.135 0.125 0.90 0.80 0.560 0.749 0.739 0.255 0.010 0.020 0.245 inches OUTLINE VERSION REFERENCES IEC JEDEC EIAJ SOT437A 1999 Apr 22 EUROPEAN PROJECTION ISSUE DATE 99-03-29 9 Philips Semiconductors Product specification NPN microwave power transistor LLE18300X DEFINITIONS Data Sheet Status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. 1999 Apr 22 10 Philips Semiconductors Product specification NPN microwave power transistor LLE18300X NOTES 1999 Apr 22 11 Philips Semiconductors – a worldwide company Argentina: see South America Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113, Tel. +61 2 9805 4455, Fax. +61 2 9805 4466 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210 Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6, 220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor, 51 James Bourchier Blvd., 1407 SOFIA, Tel. +359 2 68 9211, Fax. +359 2 68 9102 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS, Tel. +1 800 234 7381, Fax. +1 800 943 0087 China/Hong Kong: 501 Hong Kong Industrial Technology Centre, 72 Tat Chee Avenue, Kowloon Tong, HONG KONG, Tel. +852 2319 7888, Fax. +852 2319 7700 Colombia: see South America Czech Republic: see Austria Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V, Tel. +45 33 29 3333, Fax. +45 33 29 3905 Finland: Sinikalliontie 3, FIN-02630 ESPOO, Tel. +358 9 615 800, Fax. +358 9 6158 0920 France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex, Tel. +33 1 4099 6161, Fax. +33 1 4099 6427 Germany: Hammerbrookstraße 69, D-20097 HAMBURG, Tel. +49 40 2353 60, Fax. +49 40 2353 6300 Hungary: see Austria India: Philips INDIA Ltd, Band Box Building, 2nd floor, 254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025, Tel. +91 22 493 8541, Fax. +91 22 493 0966 Indonesia: PT Philips Development Corporation, Semiconductors Division, Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510, Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080 Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel. +353 1 7640 000, Fax. +353 1 7640 200 Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053, TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007 Italy: PHILIPS SEMICONDUCTORS, Piazza IV Novembre 3, 20124 MILANO, Tel. +39 2 6752 2531, Fax. +39 2 6752 2557 Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5077 Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL, Tel. +82 2 709 1412, Fax. +82 2 709 1415 Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR, Tel. +60 3 750 5214, Fax. +60 3 757 4880 Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905, Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087 Middle East: see Italy Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Norway: Box 1, Manglerud 0612, OSLO, Tel. +47 22 74 8000, Fax. +47 22 74 8341 Pakistan: see Singapore Philippines: Philips Semiconductors Philippines Inc., 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474 Poland: Ul. Lukiska 10, PL 04-123 WARSZAWA, Tel. +48 22 612 2831, Fax. +48 22 612 2327 Portugal: see Spain Romania: see Italy Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW, Tel. +7 095 755 6918, Fax. +7 095 755 6919 Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762, Tel. +65 350 2538, Fax. +65 251 6500 Slovakia: see Austria Slovenia: see Italy South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale, 2092 JOHANNESBURG, P.O. Box 7430 Johannesburg 2000, Tel. +27 11 470 5911, Fax. +27 11 470 5494 South America: Al. Vicente Pinzon, 173, 6th floor, 04547-130 SÃO PAULO, SP, Brazil, Tel. +55 11 821 2333, Fax. +55 11 821 2382 Spain: Balmes 22, 08007 BARCELONA, Tel. +34 93 301 6312, Fax. +34 93 301 4107 Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM, Tel. +46 8 5985 2000, Fax. +46 8 5985 2745 Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH, Tel. +41 1 488 2741 Fax. +41 1 488 3263 Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1, TAIPEI, Taiwan Tel. +886 2 2134 2886, Fax. +886 2 2134 2874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260, Tel. +66 2 745 4090, Fax. +66 2 398 0793 Turkey: Talatpasa Cad. No. 5, 80640 GÜLTEPE/ISTANBUL, Tel. +90 212 279 2770, Fax. +90 212 282 6707 Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7, 252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461 United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. +44 181 730 5000, Fax. +44 181 754 8421 United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409, Tel. +1 800 234 7381, Fax. +1 800 943 0087 Uruguay: see South America Vietnam: see Singapore Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD, Tel. +381 11 62 5344, Fax.+381 11 63 5777 For all other countries apply to: Philips Semiconductors, International Marketing & Sales Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 Internet: http://www.semiconductors.philips.com © Philips Electronics N.V. 1999 SCA63 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 125002/00/03/pp12 Date of release: 1999 Apr 22 Document order number: 9397 750 05717