TI CSD17506Q5A

CSD17506Q5A
www.ti.com
SLPS304 – DECEMBER 2010
30V, N-Channel NexFET™ Power MOSFETs
Check for Samples: CSD17506Q5A
PRODUCT SUMMARY
FEATURES
1
•
•
•
•
•
•
•
2
TA = 25°C unless otherwise stated
Ultralow Qg and Qgd
Low Thermal Resistance
Avalanche Rated
Pb Free Terminal Plating
RoHS Compliant
Halogen Free
SON 5-mm × 6-mm Plastic Package
•
30
V
Qg
Gate Charge Total (4.5V)
8.3
nC
Qgd
Gate Charge Gate to Drain
RDS(on)
Drain to Source On Resistance
VGS(th)
Threshold Voltage
8
1
D
7
2
4
D
6
D
5
D
D
V
Media
CSD17506Q5A
Qty
Ship
2500
Tape and
Reel
TA = 25°C unless otherwise stated
VALUE
UNIT
VDS
Drain to Source Voltage
30
V
VGS
Gate to Source Voltage
+20 / –12
V
Continuous Drain Current, TC = 25°C
100
A
Continuous Drain Current(1)
23
A
IDM
Pulsed Drain Current, TA = 25°C(2)
150
A
PD
Power Dissipation(1)
3.2
W
TJ,
TSTG
Operating Junction and Storage Temperature
Range
–55 to 150
°C
EAS
Avalanche Energy, single pulse
ID = 72A, L = 0.1mH, RG = 25Ω
259
mJ
(1) Typical RqJA = 39°C/W on a 1-inch2 (6.45-cm2), 2-oz. (0.071mm thick) Cu pad on a 0.06-inch (1.52-mm) thick FR4 PCB.
(2) Pulse duration ≤300ms, duty cycle ≤2%
P0093-01
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
GATE CHARGE
16
10
ID = 20A
14
VGS - Gate-to-Source Voltage (V)
RDS(on) - On-State Resistance - mΩ
mΩ
13-Inch
Reel
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
RDS(on) vs VGS
12
10
8
6
4
TC = 25°C
TC = 125ºC
2
0
3.2
1.3
Package
ID
G
VGS = 10V
SON 5-mm × 6-mm
Plastic Package
Top View
3
mΩ
Text Added For Spacing
ABSOLUTE MAXIMUM RATINGS
The NexFET™ power MOSFET has been designed
to minimize losses in power conversion applications.
S
nC
4.2
Device
DESCRIPTION
S
2.3
VGS = 4.5V
Text Added For Spacing
ORDERING INFORMATION
Point-of-Load Synchronous Buck in
Networking, Telecom, and Computing Systems
Synchronous or Control FET Applications
S
UNIT
Drain to Source Voltage
APPLICATIONS
•
TYPICAL VALUE
VDS
0
1
2
3
ID = 20A
VDD = 15V
9
8
7
6
5
4
3
2
1
4
5
6
7
VGS - Gate-to- Source Voltage - V
8
9
10
0
0
2
4
6
8
10
12
14
16
18
Qg - Gate Charge - nC (nC)
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NexFET is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated
CSD17506Q5A
SLPS304 – DECEMBER 2010
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ELECTRICAL CHARACTERISTICS
(TA = 25°C unless otherwise stated)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Static Characteristics
BVDSS
Drain to Source Voltage
VGS = 0V, IDS = 250mA
IDSS
Drain to Source Leakage Current
VGS = 0V, VDS = 24V
IGSS
Gate to Source Leakage Current
VDS = 0V, VGS = +20 / –12V
VGS(th)
Gate to Source Threshold Voltage
VDS = VGS, IDS = 250mA
RDS(on)
Drain to Source On Resistance
gfs
Transconductance
30
1
V
1
mA
100
nA
1.3
1.8
V
VGS = 4.5V, IDS = 20A
4.2
5.3
mΩ
VGS = 10V, IDS = 20A
3.2
4
mΩ
VDS = 15V, IDS = 20A
76
S
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
RG
Series Gate Resistance
Qg
Gate Charge Total (4.5V)
8.3
Qgd
Gate Charge Gate to Drain
Qgs
Gate Charge Gate to Source
Qg(th)
Gate Charge at Vth
Qoss
Output Charge
td(on)
Turn On Delay Time
tr
Rise Time
13
ns
td(off)
Turn Off Delay Time
13
ns
tf
Fall Time
5.3
ns
VGS = 0V, VDS = 15V,
f = 1MHz
VDS = 15V, IDS = 20A
VDS = 14V, VGS = 0V
VDS = 15V, VGS = 4.5V,
IDS = 20A, RG = 2Ω
1270
1650
pF
860
1120
pF
50
65
pF
1.1
2.2
Ω
11
nC
2.3
nC
3.1
nC
1.6
nC
23
nC
7.5
ns
Diode Characteristics
VSD
Diode Forward Voltage
Qrr
Reverse Recovery Charge
trr
Reverse Recovery Time
ISD = 20A, VGS = 0V
0.8
VDD = 14V, IF = 20A, di/dt = 300A/ms
1
V
33
nC
27
ns
THERMAL CHARACTERISTICS
(TA = 25°C unless otherwise stated)
PARAMETER
RqJC
Thermal Resistance Junction to Case
RqJA
Thermal Resistance Junction to Ambient (1) (2)
(1)
(2)
2
MIN
(1)
2
TYP
MAX
UNIT
1
°C/W
50
°C/W
2
RqJC is determined with the device mounted on a 1-inch (6.45-cm ), 2-oz. (0.071-mm thick) Cu pad on a 1.5-inch × 1.5-inch (3.81-cm ×
3.81-cm), 0.06-inch (1.52-mm) thick FR4 PCB. RqJC is specified by design, whereas RqJA is determined by the user’s board design.
Device mounted on FR4 material with 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu.
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD17506Q5A
CSD17506Q5A
www.ti.com
GATE
SLPS304 – DECEMBER 2010
GATE
Source
N-Chan 5x6 QFN TTA MIN Rev3
N-Chan 5x6 QFN TTA MAX Rev3
Max RqJA = 50°C/W
when mounted on
1 inch2 (6.45 cm2) of
2-oz. (0.071-mm thick)
Cu.
Source
Max RqJA = 120°C/W
when mounted on a
minimum pad area of
2-oz. (0.071-mm thick)
Cu.
DRAIN
DRAIN
M0137-02
M0137-01
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TYPICAL MOSFET CHARACTERISTICS
(TA = 25°C unless otherwise stated)
Figure 1. Transient Thermal Impedance
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD17506Q5A
3
CSD17506Q5A
SLPS304 – DECEMBER 2010
www.ti.com
TYPICAL MOSFET CHARACTERISTICS (continued)
(TA = 25°C unless otherwise stated)
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
80
100
60
50
40
30
VGS = 10V
VGS = 8.0V
VGS = 6.0V
VGS = 4.5V
VGS = 4.0V
20
10
0
0
0.1
0.2
0.3
0.4
0.5
0.6
IDS - Drain-to-Source Current - A
IDS - Drain-to-Source Current - A
VDS = 5V
70
10
1
0.1
0.01
0.001
0.7
TC = 125°C
TC = 25°C
TC = −55°C
0
0.5
1
VDS - Drain-to-Source Voltage - V
2
2.5
3
3.5
Figure 2. Saturation Characteristics
Figure 3. Transfer Characteristics
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
10
4
100
Ciss = Cgd + Cgs
Coss = Cds + Cgd
Crss = Cgd
ID = 20A
VDD = 15V
9
8
10
C − Capacitance − nF
VGS - Gate-to-Source Voltage (V)
1.5
VGS - Gate-to-Source Voltage - V
7
6
5
4
3
1
0.1
2
1
0
0
2
4
6
8
10
12
14
16
0.01
18
0
5
10
Qg - Gate Charge - nC (nC)
15
20
25
Figure 4. Gate Charge
Figure 5. Capacitance
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
16
2.1
ID = 20A
RDS(on) - On-State Resistance - mΩ
VGS(th) - Threshold Voltage - V
ID = 250µA
1.8
1.5
1.2
0.9
0.6
0.3
0
−75
−25
25
75
125
175
14
12
10
8
6
4
TC = 25°C
TC = 125ºC
2
0
0
1
Figure 6. Threshold Voltage vs. Temperature
2
3
4
5
6
7
8
9
10
VGS - Gate-to- Source Voltage - V
TC - Case Temperature - ºC
4
30
VDS - Drain-to-Source Voltage - V
Figure 7. On-State Resistance vs. Gate-to-Source Voltage
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD17506Q5A
CSD17506Q5A
www.ti.com
SLPS304 – DECEMBER 2010
TYPICAL MOSFET CHARACTERISTICS (continued)
(TA = 25°C unless otherwise stated)
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
1.6
100
ID = 20A
VGS = 10V
ISD − Source-to-Drain Current - A
Normalized On-State Resistance
1.8
1.4
1.2
1
0.8
0.6
0.4
0.2
−75
−25
25
75
125
10
1
0.1
0.01
0.001
0.0001
175
TC = 25°C
TC = 125°C
0
0.2
0.6
0.8
Figure 8. Normalized On-State Resistance vs. Temperature
Figure 9. Typical Diode Forward Voltage
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
200
100
10
1
100µs
1ms
10ms
100ms
1s
DC
0.1
0.01
0.001
1
1000
I(AV) - Peak Avalanche Current - A
IDS - Drain-to-Source Current - A
0.4
VSD − Source-to-Drain Voltage - V
TC - Case Temperature - ºC
Single Pulse, Min Cu Area
Typical RthJA = 96ºC/W
0.0001
0.001
0.01
0.1
1
10
TC = 125°C
TC = 25°C
100
10
1
0.01
100
0.1
1
10
t(AV) - Time in Avalanche - ms
VDS - Drain-to-Source Voltage - V
Figure 10. Maximum Safe Operating Area
Figure 11. Single Pulse Unclamped Inductive Switching
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
TEXT ADDED FOR SPACING
IDS - Drain- to- Source Current - A
120
100
80
60
40
20
0
−50
−25
0
25
50
75
100
125
150
175
TC - Case Temperature - ºC
Figure 12. Maximum Drain Current vs. Temperature
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD17506Q5A
5
CSD17506Q5A
SLPS304 – DECEMBER 2010
www.ti.com
MECHANICAL DATA
Q5A Package Dimensions
E2
L
K
H
2
7
8
8
2
7
1
1
q
3
5
4
6
3
4
D2
6
D1
5
e
b
L1
Top View
Bottom View
Side View
q
A
c
E1
E
Front View
M0135-01
DIM
6
MILLIMETERS
MIN
NOM
MAX
A
0.90
1.00
1.10
b
0.33
0.41
0.51
c
0.20
0.25
0.34
D1
4.80
4.90
5.00
D2
3.61
3.81
4.02
E
5.90
6.00
6.10
E1
5.70
5.75
5.80
E2
3.38
3.58
3.78
e
1.17
1.27
1.37
H
0.41
0.56
0.71
K
1.10
L
0.51
0.61
0.71
L1
0.06
0.13
0.20
q
0°
Submit Documentation Feedback
12°
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD17506Q5A
CSD17506Q5A
www.ti.com
SLPS304 – DECEMBER 2010
Recommended PCB Pattern
4.900 (0.193)
0.605 (0.024)
5
4
0.630 (0.025)
0.620 (0.024)
1.270
(0.050)
4.460
(0.176)
8
1
0.650 (0.026)
3.102 (0.122)
0.700 (0.028)
1.798 (0.071)
M0139-01
NOTE: Dimensions are in mm (inches).
TEXT ADDED FOR SPACING
Stencil Recommendation
0.500 (0.020)
1.235 (0.049)
0.500 (0.020)
1.585 (0.062)
4
5
0.450
(0.018)
1.570
(0.062)
0.620 (0.024)
1.270
(0.050)
1.570
(0.062)
4.260
(0.168)
8
1
PCB Pattern
0.632 (0.025)
3.037 (0.120)
1.088 (0.043)
Stencil Opening
M0209-01
NOTE: Dimensions are in mm (inches).
TEXT
ADDED
FOR
SPACING
For recommended circuit layout for PCB designs, see application note SLPA005 – Reducing Ringing Through
PCB Layout Techniques.
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD17506Q5A
7
CSD17506Q5A
SLPS304 – DECEMBER 2010
www.ti.com
Q5A Tape and Reel Information
K0
4.00 ±0.10 (See Note 1)
0.30 ±0.05
+0.10
2.00 ±0.05
Ø 1.50 –0.00
1.75 ±0.10
5.50 ±0.05
12.00 ±0.30
B0
R 0.30 MAX
A0
8.00 ±0.10
Ø 1.50 MIN
R 0.30 TYP
A0 = 6.50 ±0.10
B0 = 5.30 ±0.10
K0 = 1.40 ±0.10
M0138-01
NOTES: 1. 10-sprocket hole-pitch cumulative tolerance ±0.2
2. Camber not to exceed 1mm in 100mm, noncumulative over 250mm
3. Material: black static-dissipative polystyrene
4. All dimensions are in mm (unless otherwise specified)
5. A0 and B0 measured on a plane 0.3mm above the bottom of the pocket
8
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD17506Q5A
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Communications and Telecom www.ti.com/communications
Amplifiers
amplifier.ti.com
Computers and Peripherals
www.ti.com/computers
Data Converters
dataconverter.ti.com
Consumer Electronics
www.ti.com/consumer-apps
DLP® Products
www.dlp.com
Energy and Lighting
www.ti.com/energy
DSP
dsp.ti.com
Industrial
www.ti.com/industrial
Clocks and Timers
www.ti.com/clocks
Medical
www.ti.com/medical
Interface
interface.ti.com
Security
www.ti.com/security
Logic
logic.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and
Automotive
www.ti.com/automotive
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
Wireless
www.ti.com/wireless-apps
RF/IF and ZigBee® Solutions
www.ti.com/lprf
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated