TI CSD16323Q3C

CSD16323Q3C
www.ti.com
SLPS248 – AUGUST 2010
N-Channel NexFET™ Power MOSFETs
Check for Samples: CSD16323Q3C
PRODUCT SUMMARY
FEATURES
1
•
•
•
•
•
•
•
•
•
2
DualCool™ Package
Optimized for 5V Gate Drive
Ultra Low Qg and Qgd
Low Thermal Resistance
Avalanche Rated
Pb Free Terminal Plating
RoHS Compliant
Halogen Free
SON 3.3-mm × 3.3-mm Plastic Package
VDS
Drain to Source Voltage
25
V
Qg
Gate Charge Total (4.5V)
6.2
nC
Qgd
Gate Charge Gate to Drain
RDS(on)
1.1
Drain to Source On Resistance
Vth
nC
VGS = 3V
5.4
mΩ
VGS = 4.5V
4.4
mΩ
VGS = 8V
3.8
mΩ
Threshold Voltage
1.1
V
ORDERING INFORMATION
Device
Package
Media
CSD16323Q3C
SON 3.3-mm × 3.3-mm
Plastic Package
13-Inch
Reel
Qty
Ship
2500
Tape and
Reel
APPLICATIONS
•
•
Point-of-Load Synchronous Buck Converter
for Applications in Networking, Telecom and
Computing Systems
Optimized for Control or Synchronous FET
Applications
ABSOLUTE MAXIMUM RATINGS
TA = 25°C unless otherwise stated
VALUE
UNIT
VDS
Drain to Source Voltage
25
V
VGS
Gate to Source Voltage
+10 / –8
V
Continuous Drain Current, TC = 25°C
60
A
Continuous Drain Current(1)
21
A
IDM
Pulsed Drain Current, TA = 25°C(2)
112
A
PD
Power Dissipation(1)
3
W
TJ,
TSTG
Operating Junction and Storage
Temperature Range
–55 to 150
°C
EAS
Avalanche Energy, single pulse
ID = 50A, L = 0.1mH, RG = 25Ω
125
mJ
ID
DESCRIPTION
The NexFET™ power MOSFET has been designed
to minimize losses in power conversion and optimized
for 5V gate drive applications. Added
For
Spacing
Text
Added
For
Spacing
Text
Added
For
Spacing
Text
Added
For
Spacing
Text
Added
For
Spacing
Text
Added
For
Spacing
Text
Added
For
Spacing
Text
Added
For
Spacing
(1) Typical RqJA = 43°C/W when mounted on a 1-inch2
(6.45-cm2), 2-oz. (0.071-mm thick) Cu pad on a 0.06-inch
(1.52-mm) thick FR4 PCB.
(2) Pulse duration ≤300ms, duty cycle ≤2% Text Added For
Spacing
Text
Added
For
Spacing
RDS(ON) vs VGS
GATE CHARGE
10
ID = 24A
14
12
10
TC = 125°C
8
ID = 24A
VDS = 12.5V
9
VG − Gate Voltage − V
RDS(on) − On-State Resistance − mW
16
6
4
8
7
6
5
4
3
2
2
TC = 25°C
1
0
0
0
1
2
3
4
5
6
7
8
VGS − Gate to Source Voltage − V
9
10
G006
0
2
4
6
8
10
12
14
Qg − Gate Charge − nC
G003
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
DualCool, NexFET are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated
CSD16323Q3C
SLPS248 – AUGUST 2010
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ELECTRICAL CHARACTERISTICS
(TA = 25°C unless otherwise stated)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Static Characteristics
BVDSS
Drain to Source Voltage
VGS = 0V, ID = 250mA
IDSS
Drain to Source Leakage Current
VGS = 0V, VDS = 20V
IGSS
Gate to Source Leakage Current
VDS = 0V, VGS = +10/-8V
VGS(th)
Gate to Source Threshold Voltage
VDS = VGS, ID = 250mA
RDS(on)
gfs
Drain to Source On Resistance
Transconductance
25
0.9
V
1
mA
100
nA
1.1
1.4
V
VGS = 3V, ID = 24A
5.4
7.2
mΩ
VGS = 4.5V, ID = 24A
4.4
5.5
mΩ
VGS = 8V, ID = 24A
3.8
4.5
mΩ
VDS = 12.5V, ID = 24A
108
S
Dynamic Characteristics
CISS
Input Capacitance
COSS
Output Capacitance
1020
1300
pF
740
960
CRSS
pF
Reverse Transfer Capacitance
50
65
pF
Rg
Series Gate Resistance
1.4
2.8
Ω
Qg
Gate Charge Total (4.5V)
6.2
8.4
nC
Qgd
Gate Charge Gate to Drain
Qgs
Gate Charge Gate to Source
Qg(th)
Gate Charge at Vth
QOSS
Output Charge
td(on)
Turn On Delay Time
tr
Rise Time
td(off)
Turn Off Delay Time
tf
Fall Time
VGS = 0V, VDS = 12.5V, f = 1MHz
VDS = 12.5V, ID = 24A
VDS = 12.5V, VGS = 0V
VDS = 12.5V, VGS = 4.5V ID = 24A
RG = 2Ω
1.1
nC
1.8
nC
1
nC
14
nC
5.3
ns
15
ns
13
ns
6.3
ns
Diode Characteristics
VSD
Diode Forward Voltage
IS = 24A, VGS = 0V
Qrr
Reverse Recovery Charge
VDD = 12.5V, IF = 24A, di/dt = 300A/ms
0.85
21
1
nC
V
trr
Reverse Recovery Time
VDD = 12.5V, IF = 24A, di/dt = 300A/ms
16
ns
THERMAL CHARACTERISTICS
(TA = 25°C unless otherwise stated)
PARAMETER
qJC(top)
qJC(bot)
Junction-to-case (bottom) thermal resistance
q JA
Junction to Ambient thermal resistance
(1)
(2)
2
MIN
Junction-to-case (top) thermal resistance
(1)
(1) (2)
2
TYP
MAX
UNIT
3.5
°C/W
2.7
°C/W
58
°C/W
2
RqJC is determined with the device mounted on a 1-inch (6.45-cm ), 2-oz. (0.071-mm thick) Cu pad on a 1.5-inch × 1.5-inch (3.81-cm ×
3.81-cm), 0.06-inch (1.52-mm) thick FR4 PCB. RqJC is specified by design, whereas RqJA is determined by the user’s board design.
Device mounted on FR4 material with 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu.
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD16323Q3C
CSD16323Q3C
www.ti.com
SLPS248 – AUGUST 2010
GATE
GATE
Source
Source
Max RqJA = 58°C/W
when mounted on 1
inch2 (6.45 cm2) of
2-oz. (0.071-mm thick)
Cu.
Max RqJA = 162°C/W
when mounted on a
minimum pad area of
2-oz. (0.071-mm thick)
Cu.
DRAIN
DRAIN
M0161-02
M0161-01
TYPICAL MOSFET CHARACTERISTICS
(TA = 25°C unless otherwise stated)
ZqJA – NormalizedThermal Impedance
10
1
0.5
0.3
0.1
Duty Cycle = t1/t2
0.1
0.05
0.01
P
0.02
0.01
t1
t2
Typical RqJA = 138°C/W (min Cu)
TJ = P ´ ZqJA ´ RqJA
Single Pulse
0.001
0.001
0.01
0.1
1
10
100
1k
tP – Pulse Duration–s
G012
Figure 1. Transient Thermal Impedance
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD16323Q3C
3
CSD16323Q3C
SLPS248 – AUGUST 2010
www.ti.com
TYPICAL MOSFET CHARACTERISTICS (continued)
(TA = 25°C unless otherwise stated)
60
60
50
VGS = 4.5V
40
ID − Drain Current − A
50
ID − Drain Current − A
VDS = 5V
VGS = 8V
VGS = 2V
VGS = 3.5V
30
20
VGS = 2.5V
10
40
TC = 125°C
30
TC = 25°C
20
TC = −55°C
10
0
0.0
0
0.5
1.0
1.5
1
2.0
VDS − Drain to Source Voltage − V
1.25
1.75
2
2.25
2.5
VGS − Gate to Source Voltage − V
G001
Figure 2. Saturation Characteristics
G002
Figure 3. Transfer Characteristics
10
2.5
f = 1MHz
VGS = 0V
ID = 24A
VDS = 12.5V
9
8
C − Capacitance − nF
VG − Gate Voltage − V
1.5
7
6
5
4
3
2.0
CISS = CGD + CGS
1.5
COSS = CGD + CGS
1.0
CRSS = CGD
0.5
2
1
0
0.0
0
2
4
6
8
10
12
14
Qg − Gate Charge − nC
0
5
G003
Figure 4. Gate Charge
RDS(on) − On-State Resistance − mW
VGS(th) − Threshold Voltage − V
20
25
G004
16
ID = 250mA
1.2
1.0
0.8
0.6
0.4
0.2
ID = 24A
14
12
10
TC = 125°C
8
6
4
2
TC = 25°C
0
−25
25
75
125
175
TC − Case Temperature − °C
0
1
2
3
4
5
6
7
8
VGS − Gate to Source Voltage − V
G005
Figure 6. Threshold Voltage vs. Temperature
4
15
Figure 5. Capacitance
1.4
0.0
−75
10
VDS − Drain to Source Voltage − V
9
10
G006
Figure 7. On-State Resistance vs. Gate-to-Source Voltage
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD16323Q3C
CSD16323Q3C
www.ti.com
SLPS248 – AUGUST 2010
TYPICAL MOSFET CHARACTERISTICS (continued)
(TA = 25°C unless otherwise stated)
1.4
100
ID = 24A
VGS = 10V
ISD − Source to Drain Current − A
Normalized On-State Resistance
1.6
1.2
1.0
0.8
0.6
0.4
0.2
0.0
−75
10
1
TC = 125°C
0.1
TC = 25°C
0.01
0.001
0.0001
−25
25
75
125
175
TC − Case Temperature − °C
0.0
0.2
1.0
G008
1k
I(AV) − Peak Avalanche Current − A
ID − Drain Current − A
0.8
Figure 9. Typical Diode Forward Voltage
1k
100
100ms
10
1ms
Area Limited
by RDS(on)
10ms
100ms
0.1
0.01
0.01
0.6
VSD − Source to Drain Voltage − V
G007
Figure 8. Normalized On-State Resistance vs. Temperature
1
0.4
Single Pulse
RqJA = 138°C/W (min Cu)
0.1
DC
1
10
TC = 125°C
10
1
0.01
100
VDS − Drain To Source Voltage − V
TC = 25°C
100
0.1
1
10
t(AV) − Time in Avalanche − ms
G009
Figure 10. Maximum Safe Operating Area
100
G010
Figure 11. Single Pulse Unclamped Inductive Switching
80
ID − Drain Current − A
70
60
50
40
30
20
10
0
−50
−25
0
25
50
75
100
125
TC − Case Temperature − °C
150
175
G011
Figure 12. Maximum Drain Current vs. Temperature
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD16323Q3C
5
CSD16323Q3C
SLPS248 – AUGUST 2010
www.ti.com
MECHANICAL DATA
Q3C Package Dimensions
D
N
D2
H
7
2
M
3
4
6
5
M1
5
3
4
6
Pin 9
b
E2
7
2
Exposed
Heat Slug
L
8
8
1
q
e
E
c1
1
N1
q
L1
A1
Top View
Bottom View
Side View
Pinout
Label
Source
A
c
Pin #
1, 2, 3, 9
4
Gate
5, 6, 7, 8
Drain
Front View
M0198-01
DIM
MILLIMETERS
NOM
MAX
MIN
NOM
MAX
A
0.950
1.000
1.100
0.037
0.039
0.043
A1
0.000
0.000
0.050
0.000
0.000
0.002
b
0.280
0.340
0.400
0.011
0.013
0.016
c
0.150
0.200
0.250
0.006
0.008
0.010
c1
0.150
0.200
0.250
0.006
0.008
0.010
D
3.200
3.300
3.400
0.126
0.130
0.134
D2
1.650
1.750
1.800
0.065
0.069
0.071
E
3.200
3.300
3.400
0.126
0.130
0.134
E2
2.350
2.450
2.550
0.093
0.096
0.100
e
6
INCHES
MIN
0.650 TYP
0.026
H
0.35
0.450
0.550
0.014
0.018
0.022
L
0.35
0.450
0.550
0.014
0.018
0.022
L1
–
–
–
–
–
–
M
1.561
1.661
1.761
0.061
0.065
0.069
M1
1.130
1.230
1.330
0.044
0.048
0.052
N
1.854
1.954
2.054
0.073
0.077
0.081
N1
0.846
0.946
1.046
0.033
0.037
0.041
q
–
–
–
–
–
–
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD16323Q3C
CSD16323Q3C
www.ti.com
SLPS248 – AUGUST 2010
2.31
1
8
8
1
0.65 Typ.
2.45
5
4
5
3.50
0.56
0.41
4
0.50 Typ.
Recommended PCB Pattern
0.63
M0143-01
For recommended circuit layout for PCB designs, see application note SLPA005 – Reducing Ringing Through
PCB Layout Techniques.
1.75 ±0.10
Text Added For Spacing
Text Added For Spacing
Q3 Tape and Reel Information
4.00 ±0.10 (See Note 1)
2.00 ±0.05
Ø 1.50
+0.10
–0.00
1.30
3.60
5.50 ±0.05
12.00
+0.30
–0.10
8.00 ±0.10
3.60
M0144-01
NOTES: 1. 10-sprocket hole-pitch cumulative tolerance ±0.2
2. Camber not to exceed 1mm in 100mm, noncumulative over 250mm
3. Material: black static-dissipative polystyrene
4. All dimensions are in mm, unless otherwise specified.
5. Thickness: 0.30 ±0.05mm
6. MSL1 260°C (IR and convection) PbF reflow compatible
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): CSD16323Q3C
7
PACKAGE MATERIALS INFORMATION
www.ti.com
21-Jan-2011
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
CSD16323Q3C
Package Package Pins
Type Drawing
SON
DQV
8
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
2500
330.0
12.8
Pack Materials-Page 1
3.6
B0
(mm)
K0
(mm)
P1
(mm)
3.6
1.2
8.0
W
Pin1
(mm) Quadrant
12.0
Q1
PACKAGE MATERIALS INFORMATION
www.ti.com
21-Jan-2011
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
CSD16323Q3C
SON
DQV
8
2500
335.0
335.0
32.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Communications and Telecom www.ti.com/communications
Amplifiers
amplifier.ti.com
Computers and Peripherals
www.ti.com/computers
Data Converters
dataconverter.ti.com
Consumer Electronics
www.ti.com/consumer-apps
DLP® Products
www.dlp.com
Energy and Lighting
www.ti.com/energy
DSP
dsp.ti.com
Industrial
www.ti.com/industrial
Clocks and Timers
www.ti.com/clocks
Medical
www.ti.com/medical
Interface
interface.ti.com
Security
www.ti.com/security
Logic
logic.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and
Automotive
www.ti.com/automotive
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
Wireless
www.ti.com/wireless-apps
RF/IF and ZigBee® Solutions
www.ti.com/lprf
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated