F E D C 78 +- 0,3 0 C A 4,85 `0,3 6,35 `0,3 (5:1) 10,23 +- 0,4 0,3 3,6 +- 0,25 0 8,23 +- 0,25 0 c 55,32 +- 0,23 0,02 21,1 +- 0,3 0 POS. 20 C RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 63,5 `0,13 POS. 1 D c 5,99 +- 00,3 0,4 10,75 +- 0,3 13,5 +- 0,4 0,3 13,07 +- 0,4 0,3 1. FOR WAVESOLDERING (SOLDER BATH TEMERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. RUBBER GASKET: TPE 8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 9. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 10. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 11. WASHERS: COPPER ALLOY; 80µin NICKEL 12. HEXLOCKING SCREWS: STAINLESS STEEL 13. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 14. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 15. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 16. CONNECTOR IS PART MARKED: 15-00076o CONEC ABC n0,6 `0,05 (37x) NOTES: D B c 10° PRESS FOR FIXING ON PCB B 3,2 `0,2 METAL BRACKET B SEALING COMPOUND O-RING PCB SNAP 15-00076o CONEC ABC 4,6 4-40 UNC 9,4 SEE NOTE 16 c NAME: TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 4-40 UNC THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. SW 4,8 tolerance dim. in mm date a Origin rev. description D 05.10.09 A drawn 17.10.08 Petker D-SUB MALE 90° 23.10.08 Fischer 37pos. SOLDER PIN ANGLED with metal bracket, hexlocking screw and snap dwg no: Inventor 10 DIN- HS part no: name C A3 sh: 1 15K1A318 R date see notes appd. d-old Ä 3435 2:1 (5:1) title: name norm 4xc scale: material: B 15-00076 o (see note 9) A F E D C B A P.C.B. HOLE DRILLINGS 63,5 `0,13 24,84 `0,1 22,1 `0,1 D D 19,33 `0,1 16,56 `0,1 13,82 `0,1 11,05 `0,1 8,28 `0,1 5,54 `0,1 2,84 `0,1 + 0,1 n1 - 0 (37x) P.C.B. EDGE b c C 6,33 `0,1 C 2,77 `0,1 1 6,85 10,75 n3,1 `0,1 (2x) FRONTPANEL 1,4 `0,1 4,14 `0,1 b c 6,91 `0,1 9,68 `0,1 12,42 `0,1 15,19 `0,1 17,96 `0,1 20,7 `0,1 23,47 `0,1 RECOMMENDED PANEL CUT-OUT B B 59,1 `0,1 i 0,26 A COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL E DO NOT ALTER CAD DRAWING BY HAND TITLE: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F ,13 63,5 `0,1 CUSTOMER APPROVAL DATE: NAME: i 0,26 B `0 APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 10° `1° APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A 4 R3, n3,1 `0,05 (2x) 11,4 `0,1 B A tolerance dim. in mm date 2xc Ä 3435 05.10.09 HS Ä 3344 15.04.09 HS a Origin rev. description D A drawn 17.10.08 Petker P.C.B. HOLE DRILLINGS appd. 23.10.08 Fischer PANEL CUT-OUT D-SUB Male 37pos. Solder pin angled 90° dwg no: Inventor 10 DIN- d-old part no: name C A3 sh: 2 15K1A318 R date 3:1 see sheet 1 title: name norm 2xb scale: material: B see sheet 1 A