T-1, (3-mm) Round, Quad PCB Mount LED Indicator, J245B Series J245B is designed to extend the reach of the LED indicators into the front bezel area where the PCB edge remains a distance away and can be CMOS driven to save components. The four lamps are positioned on a 0.3" pitch. The foot print of the pin-out is the same as the J244B but the lamps are centered 0.25" above the mounting plane and the lamps are significantly more forward. 27.6(1.09) 20.3(.80) 2.5(.10) 7.62(.30) 8.6(.34) 6.4(.25) 3.5(.13 ) Anode Typ 15.24(.60 ) 19.1(.75) Ø1.0(0.04) 2 pls Green Anode + – (Pinout for single color) Red or yellow Anode (typ for bi-color) Specify part desired as follows: J245B/Order Code LED1 + Order Code LED 2 + Order Code LED 3 + Order Code LED 4 For example: “J245B/I+Y+2G” designates an assembly with a red LED, a yellow LED and 2 green LED's from left to right. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Color Typical Characteristics Order Code Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=2 mA (Deg) Recom. Op. If (mA) Red I 639 1.8 4.0 50 2 - 10 Green G 575 1.7 2.5 60 2 - 10 Yellow Y 591 1.85 4.0 45 2 - 10 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A