NID9N05CL Power MOSFET 9 Amps, 52 Volts N-Channel, Logic Level, Clamped MOSFET w/ ESD Protection in a DPAK Package http://onsemi.com Benefits 9 AMPERES 52 V CLAMPED RDS(on) = 90 m (Typ.) • High Energy Capability for Inductive Loads • Low Switching Noise Generation Features • • • • • Drain (Pins 2, 4) Diode Clamp Between Gate and Source ESD Protection - HBM 5000 V Active Over-Voltage Gate to Drain Clamp Scalable to Lower or Higher RDS(on) Internal Series Gate Resistance Gate (Pin 1) Applications RG MPWR Overvoltage Protection ESD Protection • Automotive and Industrial Markets: Solenoid Drivers, Lamp Drivers, Small Motor Drivers Source (Pin 3) MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Drain-to-Source Voltage Internally Clamped VDSS 52-59 Vdc Gate-to-Source Voltage - Continuous VGS ±12 Vdc Drain Current - Continuous @ TA = 25°C Drain Current - Single Pulse (tp = 10 s) ID IDM 9.0 35 A Total Power Dissipation @ TA = 25°C PD 28.8 W TJ, Tstg -55 to 175 °C Single Pulse Drain-to-Source Avalanche Energy - Starting TJ = 125°C (VDD = 50 V, ID(pk) = 1.5 A, VGS = 10 V, RG = 25 ) EAS 160 mJ Thermal Resistance - Junction-to-Case - Junction-to-Ambient (Note 1) - Junction-to-Ambient (Note 2) RJC RJA RJA 5.2 72 100 °C/W TL 260 °C Operating and Storage Temperature Range Maximum Lead Temperature for Soldering Purposes, 1/8″ from Case for 10 Sec. March, 2003 - Rev. 3 YWW 1 2 DPAK CASE 369A STYLE 2 D9N05CL Y WW 3 = Device Code = Year = Work Week X 4 D9N05CL 1 2 3 4 = Gate = Drain = Source = Drain ORDERING INFORMATION 1. When surface mounted to an FR4 board using 1″ pad size, (Cu area 1.127 in2) 2. When surface mounted to an FR4 board using minimum recommended pad size, (Cu area 0.412 in2) Semiconductor Components Industries, LLC, 2003 MARKING DIAGRAM 1 Device Package Shipping NID9N05CLT4 DPAK 2500/Tape & Reel NID9N05CL DPAK 75 Units/Rail Publication Order Number: NID9N05CL/D NID9N05CL MOSFET ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit 52 - 55 -10 59 - Vdc mV/°C - - 10 25 - ±22 ±10 - 1.3 - 1.75 -4.5 2.5 - 70 67 153 175 90 95 181 364 1210 - gFS - 24 - Mhos Ciss - 155 250 pF Coss - 60 100 Transfer Capacitance Crss - 25 40 Input Capacitance Ciss - 175 - Coss - 70 - Crss - 30 - OFF CHARACTERISTICS Drain-to-Source Breakdown Voltage (Note 3) (VGS = 0 Vdc, ID = 1.0 mAdc) Temperature Coefficient (Negative) V(BR)DSS Zero Gate Voltage Drain Current (VDS = 40 Vdc, VGS = 0 Vdc) (VDS = 40 Vdc, VGS = 0 Vdc, TJ = 125°C) IDSS Gate-Body Leakage Current (VGS = ±8 Vdc, VDS = 0 Vdc) (VGS = ±14 Vdc, VDS = 0 Vdc) IGSS Adc Adc ON CHARACTERISTICS (Note 3) Gate Threshold Voltage (Note 3) (VDS = VGS, ID = 100 Adc) Threshold Temperature Coefficient (Negative) VGS(th) Static Drain-to-Source On-Resistance (Note 3) (VGS = 4.0 Vdc, ID = 1.5 Adc) (VGS = 3.5 Vdc, ID = 0.6 Adc) (VGS = 3.0 Vdc, ID = 0.2 Adc) (VGS = 12 Vdc, ID = 9.0 Adc) (VGS = 12 Vdc, ID = 12 Adc) RDS(on) Forward Transconductance (Note 3) (VDS = 15 Vdc, ID = 9.0 Adc) Vdc mV/°C m DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance Output Capacitance (VDS = 40 Vdc, VGS = 0 V, f = 10 kHz) (VDS = 25 Vdc, VGS = 0 V, f = 10 kHz) Transfer Capacitance 3. Pulse Test: Pulse Width ≤ 300 s, Duty Cycle ≤ 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 pF NID9N05CL MOSFET ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit td(on) - 130 200 ns tr - 500 750 td(off) - 1300 2000 tf - 1150 1850 td(on) - 200 - tr - 500 - td(off) - 2500 - tf - 1800 - td(on) - 120 - tr - 275 - td(off) - 1600 - tf - 1100 - QT - 4.5 7.0 Q1 - 1.2 - Q2 - 2.7 - QT - 3.6 - Q1 - 1.0 - Q2 - 2.0 - VSD - 0.86 0.845 0.725 1.2 - Vdc trr - 700 - ns ta - 200 - tb - 500 - QRR - 6.5 - C ESD 5000 - - V 500 - - SWITCHING CHARACTERISTICS (Note 4) Turn-On Delay Time Rise Time Turn-Of f Delay Time (VGS = 10 Vdc, VDD = 40 Vdc, ID = 9.0 Adc, RG = 9.0 ) Fall Time Turn-On Delay Time Rise Time Turn-Of f Delay Time (VGS = 10 Vdc, VDD = 15 Vdc, ID = 1.5 Adc, RG = 2 k) Fall Time Turn-On Delay Time Rise Time Turn-Of f Delay Time (VGS = 10 Vdc, VDD = 15 Vdc, ID = 1.5 Adc, RG = 50 ) Fall Time Gate Charge (VGS = 4.5 Vdc, VDS = 40 Vdc, ID = 9.0 Adc) (Note 3) Gate Charge (VGS = 4.5 Vdc, VDS = 15 Vdc, ID = 1.5 Adc) (Note 3) ns ns nC nC SOURCE-DRAIN DIODE CHARACTERISTICS Forward On-Voltage (IS = 4.5 Adc, VGS = 0 Vdc) (Note 3) (IS = 4.0 Adc, VGS = 0 Vdc) (IS = 4.5 Adc, VGS = 0 Vdc, TJ = 125°C) Reverse Recovery Time (IS = 4.5 Adc, VGS = 0 Vdc, dIs/dt = 100 A/s) (Note 3) Reverse Recovery Stored Charge ESD CHARACTERISTICS Electro-Static Discharge Capability Human Body Model (HBM) Machine Model (MM) 3. Pulse Test: Pulse Width ≤ 300 s, Duty Cycle ≤ 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 3 NID9N05CL 18 18 TJ = 25°C 8V 14 6.5 V ID, DRAIN CURRENT (AMPS) 16 ID, DRAIN CURRENT (AMPS) 6V VGS = 10 V 5V 12 4.6 V 10 4.2 V 4V 3.8 V 8 6 3.2 V 4 3.4 V 2 1 2 3 4 5 6 7 TJ = 100°C 10 8 6 4 VDS ≥ 10 V 1 8 2 6 5 7 8 Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics RDS(on), DRAIN-TO-SOURCE RESISTANCE (Ω) VGS, GATE-T O-SOURCE VOLTAGE (VOLTS) 0.5 ID = 4.5 A TJ = 25°C 0.4 0.3 0.2 0.1 2 4 6 8 10 12 9 0.4 0.35 TJ = 25°C VGS = 4 V 0.3 0.25 0.2 0.15 VGS = 12 V 0.1 0.05 0 0 2 4 6 8 10 12 14 16 18 VGS, GATE-T O-SOURCE VOLTAGE (VOLTS) ID, DRAIN CURRENT (AMPS) Figure 3. On-Resistance versus Gate-to-Source Voltage Figure 4. On-Resistance versus Drain Current and Gate Voltage 2.5 1,000,000 ID = 9 A VGS = 12 V VGS = 0 V 2 100,000 1.5 TJ = 150°C 10,000 1 0.5 -50 4 3 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) IDSS, LEAKAGE (nA) RDS(on), DRAIN-TO-SOURCE RESISTANCE (Ω) TJ = 25°C 12 0 0 RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) 14 2 2.8 V 0 0 TJ = -55°C 16 TJ = 100°C 1000 100 -25 0 25 50 75 100 125 150 175 20 25 30 35 40 45 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current versus Voltage http://onsemi.com 4 50 NID9N05CL 500 C, CAPACITANCE (pF) Frequency = 10 kHz TJ = 25°C VGS = 0 V 400 300 200 Ciss Coss 100 Crss 0 0 20 10 30 40 50 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) 50 QT 4 40 VGS Qgs 3 Qgd 30 20 2 ID = 9 A TJ = 25°C VDS 1 10 0 0 0 1 2 3 4 Qg, TOTAL GATE CHARGE (nC) 5 10,000 VDD = 40 V ID = 9 A VGS = 10 V t, TIME (ns) 5 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) td(off) 1000 tf tr td(on) 100 1 Figure 8. Gate-To-Source and Drain-To-Source Voltage versus Total Charge 10 RG, GATE RESISTANCE (OHMS) Figure 9. Resistive Switching Time Variation versus Gate Resistance DRAIN-T O-SOURCE DIODE CHARACTERISTICS 10 IS, SOURCE CURRENT (AMPS) VGS , GATE-T O-SOURCE VOLTAGE (VOLTS) Figure 7. Capacitance Variation VGS = 0 V TJ = 25°C 8 6 4 2 0 0.4 0.6 0.8 1.0 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) 1.2 Figure 10. Diode Forward Voltage versus Current http://onsemi.com 5 100 NID9N05CL SAFE OPERATING AREA The Forward Biased Safe Operating Area curves define the maximum simultaneous drain-to-source voltage and drain current that a transistor can handle safely when it is forward biased. Curves are based upon maximum peak junction temperature and a case temperature (TC) of 25°C. Peak repetitive pulsed power limits are determined by using the thermal response data in conjunction with the procedures discussed in AN569, “Transient Thermal Resistance General Data and Its Use.” Switching between the off-state and the on-state may traverse any load line provided neither rated peak current (IDM) nor rated voltage (VDSS) is exceeded and the transition time (tr,tf) do not exceed 10 µs. In addition the total power averaged over a complete switching cycle must not exceed (TJ(MAX) - TC)/(RθJC). A Power MOSFET designated E-FET can be safely used in switching circuits with unclamped inductive loads. For reliable operation, the stored energy from circuit inductance dissipated in the transistor while in avalanche must be less than the rated limit and adjusted for operating conditions differing from those specified. Although industry practice is to rate in terms of energy, avalanche energy capability is not a constant. The energy rating decreases non-linearly with an increase of peak current in avalanche and peak junction temperature. Although many E- FETs can withstand the stress of drain- to- source avalanche at currents up to rated pulsed current (IDM), the energy rating is specified at rated continuous current (ID), in accordance with industry custom. The energy rating must be derated for temperature as shown in the accompanying graph (Figure 12). Maximum energy at currents below rated continuous ID can safely be assumed to equal the values indicated. http://onsemi.com 6 NID9N05CL SAFE OPERATING AREA I D, DRAIN CURRENT (AMPS) 100 VGS = 12 V SINGLE PULSE TC = 25°C 100 µs 10 1 ms 10 ms 1 dc RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 0.1 0.1 r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) 10 µs 10 1 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) 100 Figure 11. Maximum Rated Forward Biased Safe Operating Area 10 D = 0.5 0.2 1 0.1 P(pk) 0.05 0.01 t1 t2 DUTY CYCLE, D = t1/t2 SINGLE PULSE 001 0.00001 0.0001 0.001 0.01 t, TIME (s) Figure 12. Thermal Response http://onsemi.com 7 0.1 RθJC(t) = r(t) RθJC D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) RθJC(t) 1 10 NID9N05CL PACKAGE DIMENSIONS DPAK CASE 369A-13 ISSUE AB C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE -T- E R 4 Z A S 1 2 3 U K F J L H D G 2 PL 0.13 (0.005) M T DIM A B C D E F G H J K L R S U V Z INCHES MIN MAX 0.235 0.250 0.250 0.265 0.086 0.094 0.027 0.035 0.033 0.040 0.037 0.047 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.175 0.215 0.020 0.050 0.020 −−− 0.030 0.050 0.138 −−− STYLE 2: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.84 1.01 0.94 1.19 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.45 5.46 0.51 1.27 0.51 −−− 0.77 1.27 3.51 −−− GATE DRAIN SOURCE DRAIN ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 8 NID9N05CL/D