DATA SHEET ZENER DIODES RD4.7SL to RD39SL ZENER DIODES 200 mW 2 PIN SUPER MINI MOLD DESCRIPTION PACKAGE DIMENSIONS Type RD4.7SL to RD39SL Series are 2 PIN Super Mini dissipation of 200 mW featuring low noise and sharp break- 2.5±0.15 down characteristic. They are intended for use in audio FEATURES • Low Noise • Sharp Breakdown characteristic. 0.9±0.1 Cathode Indication • Vz: Applied E24 standard. 0.19 1.7±0.1 ;; ; ; ; equipment, instrument equipment. 0.3±0.05 1.25±0.1 (in millimeters) Mold Package zener diodes possessing an allowable power APPLICATIONS Power Dissipation P 200 mW Forward Current IF 100 mA 0±0.05 ABSOLUTE MAXIMUM RATINGS (TA = 25°C) 0.11 +0.05 –0.01 Circuits for Constant Voltage, Constant Current, Waveform Clipper, Surge absorber, etc. Reverse Surge Power PRSM 2.2W (at t=10 µs/1 pulse) Show fig. 8 Junction Temperature Tj 150°C Storage Temperature Tstg –55 to +150°C The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. D11445EJ3V0DS00 (3rd edition) Date Published April 2003 N CP(K) Printed in Japan c RD4.7SL to RD39SL ELECTRICAL CHARACTERISTICS (TA = 25 ± 2°C) Type Number RD4.7SL RD5.1SL RD5.6SL RD6.2SL RD6.8SL RD7.5SL RD8.2SL RD9.1SL RD10SL RD11SL 2 Class Zener Voltage Vz (V)Note 1 Dynamic Impedance Zz (Ω)Note 2 Reverse Current IR (µA) MIN. MAX. Iz (mA) MAX. Iz (mA) MAX. VR (V) N 4.39 4.91 0.5 800 0.5 2 1.0 N1 4.39 4.62 N2 4.52 4.76 N3 4.66 4.91 N 4.81 5.36 0.5 500 0.5 2 1.5 N1 4.81 5.05 N2 4.95 5.20 N3 5.10 5.36 0.5 200 0.5 1 2.5 0.5 100 0.5 1 3.0 0.5 60 0.5 0.5 3.5 0.5 60 0.5 0.5 4.0 0.5 60 0.5 0.5 5.0 0.5 60 0.5 0.5 6.0 0.5 60 0.5 0.1 7.0 0.5 60 0.5 0.1 8.0 N 5.26 5.91 N1 5.26 5.54 N2 5.44 5.73 N3 5.63 5.91 N 5.81 6.53 N1 5.81 6.11 N2 6.01 6.32 N3 6.21 6.53 N 6.41 7.14 N1 6.41 6.74 N2 6.60 6.94 N3 6.80 7.14 N 7.00 7.83 N1 7.00 7.35 N2 7.21 7.60 N3 7.46 7.83 N 7.69 8.61 N1 7.69 8.08 N2 7.94 8.34 N3 8.20 8.61 N 8.47 9.51 N1 8.47 8.91 N2 8.76 9.21 N3 9.06 9.51 N 9.35 10.51 N1 9.35 9.82 N2 9.66 10.16 N3 10.00 10.51 N 10.32 11.50 N1 10.32 10.84 N2 10.64 11.17 N3 10.97 11.50 Data Sheet D11445EJ3V0DS RD4.7SL to RD39SL ELECTRICAL CHARACTERISTICS (TA = 25 ± 2°C) Type Number Class Zener Voltage Vz (V)Note 1 Dynamic Impedance Zz (Ω)Note 2 Reverse Current IR (µA) MIN. MAX. Iz (mA) MAX. Iz (mA) MAX. VR (V) N 11.28 12.52 0.5 80 0.5 0.1 9.0 N1 11.28 11.83 N2 11.59 12.17 N3 11.93 12.52 RD13SL N 12.29 13.86 0.5 80 0.5 0.1 10 RD15SL N 13.63 15.38 0.5 80 0.5 0.1 11 RD16SL N 15.13 16.91 0.5 80 0.5 0.1 12 RD18SL N 16.63 18.81 0.5 80 0.5 0.1 13 RD20SL N 18.51 20.79 0.5 100 0.5 0.1 15 RD22SL N 20.46 22.82 0.5 100 0.5 0.1 17 RD24SL N 22.42 25.17 0.5 120 0.5 0.1 19 RD27SL N 24.75 27.95 0.5 150 0.5 0.1 21 RD30SL N 27.38 31.04 0.5 200 0.5 0.1 23 RD33SL N 30.30 33.97 0.5 250 0.5 0.1 25 RD36SL N 33.08 36.83 0.5 300 0.5 0.1 27 RD39SL N 35.78 39.67 0.5 360 0.5 0.1 30 RD12SL Note 1. Vz is tested with puls (40 ms). 2. Zz is measured at Iz by given a very small A.C. current signal. Data Sheet D11445EJ3V0DS 3 RD4.7SL to RD39SL TYPICAL CHATACTERISTICS (TA = 25°C) Fig. 1 POWER DISSIPATION vs. AMBIENT TEMPERATURE 250 200 P - Power Dissipation - mW 30 × 30 × 1.6 P.C.B.(Glass Epoxy) 150 100 50 0 0 25 75 50 100 150 125 TA - Ambient Temperature - °C 10 m 1m 100 µ RD15SL RD13SL RD12SL RD11SL RD10SL 100 m 10 µ 10 m 1m 100 µ 10 µ 3 4 5 6 7 8 9 Vz - Zener Voltage – V 4 RD9.1SL RD8.2SL RD7.5SL RD6.8SL Fig. 3 ZENER CURRENT vs. ZENER VOLTAGE Iz – Zener Current – A Iz – Zener Current – A 100 m RD6.2SL RD4.7SL RD5.1SL RD5.6SL Fig.2 ZENER CURRENT vs. ZENER VOLTAGE 9 10 11 12 13 Vz - Zener Voltage – V Data Sheet D11445EJ3V0DS 14 15 RD4.7SL to RD39SL Iz – Zener Current – A 1m 100 µ RD39SL RD36SL RD33SL RD27SL RD24SL RD22SL RD20SL RD18SL RD16SL 100 m 10 m 10 m 1m 100 µ 10 µ 10 µ 18 20 22 24 26 28 28 30 ZENER VOLTAGE TEMPERATURE COEFFICIENT vs. ZENER VOLTAGE %/°C 0.08 32 0.06 24 0.04 16 mV/°C 0.02 8 0 0 – 0.02 –8 – 0.04 – 16 4 8 34 36 38 40 42 44 Vz - Zener Voltage – V Vz - Zener Voltage – V Fig. 6 32 12 16 20 24 28 32 36 40 γ Z – Zener Voltage Temperature Coefficient – mV/°C 16 γ Z – Zener Voltage Temperature Coefficient – %/°C Iz – Zener Current – A 100 m RD30SL Fig.5 ZENER CURRENT vs. ZENER VOLTAGE Fig. 4 ZENER CURRENT vs. ZENER VOLTAGE Vz – Zener Voltage – V Data Sheet D11445EJ3V0DS 5 RD4.7SL to RD39SL Fig.7 TRANSIENT THERMAL IMPEDANCE CHARACTERISTIC Zth - Transient Thermal Impedance - °C/W 5000 1000 625°C/W RD[ ]SL 100 10 5 1m P.C.B. (Glass Epoxy) (30mm x 30mm x 1.6mm) 10m 100m 1 10 100 t - Time - s Fig.8 SURGE REVERSE POWER RATINGS TA = 25°C Non Repetitive PRSM PRSM - Surge Reverse Power - W 50 10 tT RD [ ] SL 1 0.5 1µ 10 µ 100 µ 1m tT - Pulse Width - s 6 Data Sheet D11445EJ3V0DS 10m 100m RD4.7SL to RD39SL • The information in this document is current as of April, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1