STP5NK60Z - STP5NK60ZFP STD5NK60Z N-CHANNEL 600V - 1.2Ω - 5A TO-220/TO-220FP/DPAK Zener-Protected SuperMESH™Power MOSFET TYPE STP5NK60Z STP5NK60ZFP STD5NK60Z ■ ■ ■ ■ ■ ■ VDSS RDS(on) ID Pw 600 V 600 V 600 V < 1.6 Ω < 1.6 Ω < 1.6 Ω 5A 5A 5A 90 W 25 W 90 W TYPICAL RDS(on) = 1.2 Ω EXTREMELY HIGH dv/dt CAPABILITY 100% AVALANCHE TESTED GATE CHARGE MINIMIZED VERY LOW INTRINSIC CAPACITANCES VERY GOOD MANUFACTURING REPEATIBILITY 3 1 TO-220 2 TO-220FP 3 1 DPAK DESCRIPTION The SuperMESH™ series is obtained through an extreme optimization of ST’s well established stripbased PowerMESH™ layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage MOSFETs including revolutionary MDmesh™ products. INTERNAL SCHEMATIC DIAGRAM APPLICATIONS ■ HIGH CURRENT, HIGH SPEED SWITCHING ■ IDEAL FOR OFF-LINE POWER SUPPLIES, ADAPTORS AND PFC ■ LIGHTING ORDERING INFORMATION SALES TYPE MARKING PACKAGE PACKAGING STP5NK60Z P5NK60Z TO-220 TUBE STP5NK60ZFP P5NK60ZFP TO-220FP TUBE STD5NK60ZT4 D5NK60 DPAK TAPE & REEL September 2002 1/12 STP5NK60Z - STP5NK60ZFP ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value STP5NK60Z STD5NK60Z VDS VDGR VGS Unit STP5NK60ZFP Drain-source Voltage (VGS = 0) 600 V Drain-gate Voltage (RGS = 20 kΩ) 600 V Gate- source Voltage ± 30 V ID Drain Current (continuous) at TC = 25°C 5 5 (*) A ID Drain Current (continuous) at TC = 100°C IDM (l) PTOT 3.16 3.16 (*) A Drain Current (pulsed) 20 20 (*) A Total Dissipation at TC = 25°C 90 25 W 0.72 0.2 W/°C Derating Factor VESD(G-S) dv/dt (1) Gate source ESD(HBM-C=100pF, R=1.5KΩ) 3000 V 4.5 V/ns Peak Diode Recovery voltage slope VISO Insulation Withstand Voltage (DC) Tj Tstg Operating Junction Temperature Storage Temperature - 2500 -55 to 150 -55 to 150 V °C °C (l) Pulse width limited by safe operating area (1) I SD ≤5A, di/dt ≤200A/µs, VDD ≤ V(BR)DSS, T j ≤ TJMAX. (*) Limited only by maximum temperature allowed THERMAL DATA TO-220 DPAK TO-220FP Rthj-case Thermal Resistance Junction-case Max 1.39 5 °C/W Rthj-amb Thermal Resistance Junction-ambient Max 62.5 100 °C/W Tl 300 Maximum Lead Temperature For Soldering Purpose °C AVALANCHE CHARACTERISTICS Symbol Parameter IAR Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) EAS Single Pulse Avalanche Energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) Max Value Unit 5 A 220 mJ GATE-SOURCE ZENER DIODE Symbol BVGSO Parameter Gate-Source Breakdown Voltage Test Conditions Igs=± 1mA (Open Drain) Min. 30 Typ. Max. Unit V (#) When mounted on minimum Footprint PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components. 2/12 STP5NK60Z - STP5NK60ZFP ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED) ON/OFF Symbol Parameter Test Conditions Min. Typ. Max. Drain-source Breakdown Voltage ID = 1 mA, VGS = 0 IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating VDS = Max Rating, TC = 125 °C 1 50 µA µA IGSS Gate-body Leakage Current (VDS = 0) VGS = ± 30V ±10 µA VGS(th) Gate Threshold Voltage VDS = VGS, ID = 50µA 3.75 4.5 V RDS(on) Static Drain-source On Resistance VGS = 10V, ID = 2.5 A 1.2 1.6 Ω Typ. Max. Unit V(BR)DSS 600 Unit 3 V DYNAMIC Symbol gfs (1) Ciss Coss Crss Coss eq. (3) Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Equivalent Output Capacitance Test Conditions Min. VDS = 8 V, ID = 2.5 A VDS = 25V, f = 1 MHz, VGS = 0 VGS = 0V, VDS = 0V to 480V 4 S 690 90 20 pF pF pF 40 pF SWITCHING ON Symbol Parameter Test Conditions Min. Typ. Max. Unit td(on) tr Turn-on Delay Time Rise Time VDD = 300 V, ID = 2.5 A RG = 4.7Ω VGS = 10 V (Resistive Load see, Figure 3) 16 25 ns ns Qg Qgs Qgd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = 400V, ID = 12 A, VGS = 10V 26 6 20 34 nC nC nC Typ. Max. Unit SWITCHING OFF Symbol Parameter Test Conditions Min. td(off) tf Turn-off Delay Time Fall Time VDD = 300 V, ID = 2.5 A RG = 4.7Ω VGS = 10 V (Resistive Load see, Figure 3) 36 25 ns ns tr(Voff) tf tc Off-voltage Rise Time Fall Time Cross-over Time VDD = 480V, ID = 5 A, RG = 4.7Ω, VGS = 10V (Inductive Load see, Figure 5) 12 10 24 ns ns ns SOURCE DRAIN DIODE Symbol Parameter ISD ISDM (2) Source-drain Current Source-drain Current (pulsed) VSD (1) Forward On Voltage ISD = 5 A, VGS = 0 Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 5 A, di/dt = 100A/µs VDD = 30V, Tj = 150°C (see test circuit, Figure 5) trr Qrr IRRM Test Conditions Min. Typ. 485 2.7 11 Max. Unit 5 20 A A 1.6 V ns µC A Note: 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. 2. Pulse width limited by safe operating area. 3. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. 3/12 STP5NK60Z - STP5NK60ZFP Safe Operating Area For TO-220/DPAK Safe Operating Area For TO-220FP Thermal Impedance For TO-220/DPAK Thermal Impedance For TO-220FP Output Characteristics Transfer Characteristics 4/12 STP5NK60Z - STP5NK60ZFP Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations Normalized Gate Threshold Voltage vs Temp. Normalized On Resistance vs Temperature 5/12 STP5NK60Z - STP5NK60ZFP Source-drain Diode Forward Characteristics Maximum Avalanche Energy vs Temperature 6/12 Normalized BVDSS vs Temperature STP5NK60Z - STP5NK60ZFP Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuit For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 7/12 STP5NK60Z - STP5NK60ZFP TO-220 MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 D1 0.107 1.27 0.050 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.067 F2 1.14 1.70 0.044 0.067 G 4.95 5.15 0.194 0.203 G1 2.4 2.7 0.094 0.106 H2 10.0 10.40 0.393 0.409 L2 16.4 0.645 13.0 14.0 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.2 6.6 0.244 0.260 L9 3.5 3.93 0.137 0.154 DIA. 3.75 3.85 0.147 0.151 D1 C D A E L4 H2 G G1 F1 L2 F2 F Dia. L5 L9 L7 L6 8/12 L4 P011C STP5NK60Z - STP5NK60ZFP TO-220FP MECHANICAL DATA mm. DIM. MIN. A 4.4 inch TYP MAX. MIN. 4.6 0.173 TYP. MAX. 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.5 0.045 0.067 F2 1.15 1.5 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 L2 0.409 16 0.630 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 B D A E L3 L3 L6 F2 H G G1 ¯ F F1 L7 L2 L5 1 2 3 L4 9/12 STP5NK60Z - STP5NK60ZFP TO-252 (DPAK) MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 2.20 2.40 0.087 0.094 A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.213 C 0.45 0.60 0.018 0.024 C2 0.48 0.60 0.019 0.024 D 6.00 6.20 0.236 0.244 E 6.40 6.60 0.252 0.260 G 4.40 4.60 0.173 0.181 H 9.35 10.10 0.368 0.398 L2 L4 V2 0.8 0.60 0 o 0.031 1.00 8 o 0.024 0 o 0.039 0o P032P_B 10/12 STP5NK60Z - STP5NK60ZFP DPAK FOOTPRINT TUBE SHIPMENT (no suffix)* All dimensions are in millimeters All dimensions are in millimeters TAPE AND REEL SHIPMENT (suffix ”T4”)* REEL MECHANICAL DATA DIM. mm MIN. A B DIM. mm inch MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 12.1 0.476 B1 1.6 MIN. 1.5 C 12.8 D 20.2 G 16.4 N 50 D 1.5 1.5 E 1.65 1.85 0.065 0.073 F 7.4 7.6 0.291 0.299 2.55 2.75 0.100 0.108 3.9 4.1 0.153 0.161 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 16.3 1.574 0.618 40 0.059 13.2 0.504 0.520 0.795 18.4 0.645 0.724 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 0.059 0.063 K0 15.7 12.992 0.059 P0 R MAX. MAX. D1 W MIN. 330 T TAPE MECHANICAL DATA inch MAX. 0.641 * on sales type 11/12 STP5NK60Z - STP5NK60ZFP Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. © http://www.st.com 12/12