Filename: tfs280g.doc version 1.6 VI TELEFILTER Filter specification 16.10.2003 TFS 280 G 1/5 Measurement condition Ambient temperature: Input power level: Source and load impedance: Terminating impedances * Input: Output: 22 0 50 275 162 2 C dBm || -7,7 pF || -10,6 pF Characteristics Remark: The reference level for the relative attenuation a rel of TFS280G is the minimum of the pass band attenuation amin. This value is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss a e. The given values for the relative attenuation arel and the group delay ripple have to be reached at the frequencies given below, even if the centre frequency f c is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc. Data typ. value Insertion loss a e = amin 11,3 Nominal frequency fN - Centre frequency fc 280,0 Relative attenuation a rel fN - 20 MHz ... fN + 20 MHz fN + fN + 10 32 40 MHz ... fN 32 MHz ... fN + 40 MHz ... fN + 220 MHz MHz MHz 0,8 Group delay ripple GDR fN – 17 MHz ... fN + 17 MHz dB limit max. 12 dB 280,0 MHz MHz - dB max. 1 dB 41 38 41 dB dB dB min. min. min. 40 37 40 dB dB dB 38 ns max. 75 ns Input power level - max. + 10 Operating temperature range - - 40 C ... + 85 C Storage temperature range - - 40 C ... + 85 C Temperature coefficient of frequency TCf -87 ppm/K dBm - *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team. **) f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz) Generated: Checked / approved: Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs280g.doc version 1.6 VI TELEFILTER Filter specification 16.10.2003 TFS 280 G 2/5 Construction and pin connection (All dimensions in mm) +0.15 5.0 SQ -0.1 7 5 280 G R16 1 3 Date code 1 2 3 4 5 6 7 8 50 Input RF return Input Ground Ground Output RF return Output Ground Ground Datecode N P R Year + week 2001 2002 2003 ... test circuit L1 2 6 L2 Input Output 50 Ohm 50 Ohm C1 SAW C2 1,3,4,5,7,8 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs280g.doc version 1.6 VI TELEFILTER 16.10.2003 Filter specification TFS 280 G 3/5 Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N 4. Resistance to solder heat (reflow): reflow possible: twice max.; for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Reel of empty components at start: Reel of empty components at start including leader: Trailer Tape (all dimensions in mm) : 12 Po : 4 ± 0,1 1,5 + 0,1 Do : E : 1,75 ± 0,1 F : 5,5 ± 0,05 G (min) : P2 : 2 ± 0,05 P1 : 8 ± 0,10 Po P2 E Ao F D1 W Bo G P1 1,5 Ao : 5,30 ± 0,1 Bo : 5,30 ± 0,1 9,5 ± 0,1 CT Do CT 0,75 D1(min) : EMBOSSED CARRIER TAPE ± 0,3 W 3000 min 300 mm min 500 mm min 300 mm : COVER TAPE W2 Reel (all dimensions in mm): A : W1 : W2 (max) : 330 12,4 ± 2,0 18,4 N (min) : 50 C : 13 ± 0.2 A C N W1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right. Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs280g.doc version 1.6 VI TELEFILTER 16.10.2003 Filter specification TFS 280 G 4/5 Air reflow temperature conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 °C - 170 °C 60 sec. - 90 sec. main-heating periods over 200 °C 20 sec. - 25 sec. peak temperature 255 °C ± 5 °C Chip-mount air reflow profile 260 240 220 200 temperature / °C 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time / sec. Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / °C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / °C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs280g.doc VI TELEFILTER version 1.6 Filter specification 16.10.2003 TFS 280 G 5/5 History Version Reason of Changes Name Date 1.0 - new generation Steiner 20.08.2002 1.1 - change temperature, add 3dB passband requirement - relax stop-band limit lines according to larger temperature range Steiner 28.10.2002 1.2 - source and load impedance added - passband magnitude extended to +/-20MHz - Tk added Steiner 07.01.2003 1.3 - label changed to standard label Steiner 18.03.2003 1.4 - change pinning corresponding to customer demands - added operating temperature range to guaranty for samples delivered with date code R16 Chilla 23.04.2003 1.5 - added limit line at 37 dB Chilla 10.07.2003 1.6 - changed development specification to filter specification - added typical values - operating temperature range changed to –40 °C ... +80 °C - added terminating impedances Chilla 16.10.2003 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.