ALUMINUM ELECTROLYTIC CAPACITORS UR Chip Type, High CV series Chip type, higher capacitance in larger case sizes. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC). WS High Temperature Reflow UG UR Extended range Higher C/V WX Specifications Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current – 40 ~ +85°C 4 ~ 100V 3.3 ~ 1500µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV (µA) . Measurement frequency : 120Hz, Temperature : 20°C tan δ 4 0.35 Rated voltage (V) tan δ (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.12 100 0.12 Measurement frequency: 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C 4 7 15 6.3 5 10 10 4 8 16 3 6 25 2 4 35 2 3 50 2 3 63 2 3 100 2 3 Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Capacitance change tan δ Leakage current Endurance After 2000 hours' application of rated voltage at 85°C, capacitors meet the characteristic requirements listed at right. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Resistance to soldering heat The capacitors shall be kept on the hot plate maintained at 250°C, for 30 seconds. After removing from the hot plate and restored at room temperature, they meet the characteristic requirements listed at right. Marking Black print on the case top. Within ±10% of initial value Initial specified value or less Initial specified value or less Type numbering system (Example : 10V 100µF) Chip Type 1 (φ6.3, φ8 × 6.2) Capacitance Positive C±0.2 2 3 4 5 6 7 8 9 10 11 12 13 14 UUR 1 A 1 0 1 M C L 1GS Package code A±0.2 Size code Configuration E B±0.2 φD±0.5 Capacitance tolerance (±20%) A±0.2 N2 100 10V 0.5MAX. Plastic platform 0.3MAX. 2Voltage Lot No. 1 Trade mark Capacitance change tan δ Leakage current L±0.3 H 1 Size φ8 × 6.2 only 2 Voltage mark for 6.3V is 6V . In case of marking for φ3 units, "V" for rated voltage is omitted. Rated Capacitance (100µF) Rated voltage (10V) Negative Series name Type (φ8 × 10, φ10 × 10) A±0.2 A±0.2 E B±0.2 N2 100 35V L±0.5 Pressure relief vent 0.5MAX. C±0.2 2 Voltage φD±0.5 Lot No. Trade mark Code CL CL CL NL NL (mm) Positive Plastic platform 0.3MAX. Capacitance φD×L 6.3 × 5.8 6.3 × 7.7 8 × 6.2 8 × 10 10 × 10 φD×L A B C E L H 6.3 × 5.8 6.3 × 7.7 8 × 6.2 8 × 10 10 × 10 2.4 6.6 6.6 2.2 5.8 0.5 ~ 0.8 2.4 6.6 6.6 2.2 7.7 0.5 ~ 0.8 3.3 8.3 8.3 2.3 6.2 0.5 ~ 0.8 2.9 8.3 8.3 3.1 10 0.8 ~ 1.1 3.2 10.3 10.3 4.5 10 0.8 ~ 1.1 Negative H Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS UR series Dimensions V Code Cap.( F) 3.3 3R3 4.7 4R7 4 6.3 10 16 25 35 50 63 0G 0J 1A 1C 1E 1V 1H 1J 100 2A 6.3 × 5.8 10 100 22 220 33 330 47 470 100 101 150 151 220 221 330 331 6.3 × 5.8 470 471 680 681 1000 1500 6.3 × 5.8 6.3 × 5.8 6.3 × 5.8 6.3 × 5.8 70 8 × 6.2 125 65 8 × 6.2 145 (143) 6.3 × 5.8 85 6.3 × 7.7 151 8 × 10. 200 8 × 10. 8 × 10. 8 × 10. 284 8 × 10. 102 8 × 10. 344 318 10 × 10. 10 × 10. 400 (372) 10 × 10. 152 10 × 10. 347 10 × 10. 100 130 155 8 × 10. 10 × 10. 6.3 × 7.7 77 8 × 10. 10 × 10. 374 240 8 × 10. 96 10 × 10. 290 8 × 10. 46 140 289 152 8 × 6.2 8 × 10. 117 238 192 8 × 6.2 40 (35) 8 × 10. 55 10 × 10. 8 × 6.2 175 (173) 31 8 × 6.2 105 (94) 8 × 10. 8 × 10. 175 (132) 10 × 10. 195 (181) 10 × 10. 8 × 10. 215 (162) 10 × 10. 250 (232) 10 × 10. 265 (246) 10 × 10. 8 × 10. 270 10 × 10. 305 (284) 10 × 10. 324 ( ) 10 × 10. 330 307 10 × 10. 393 8 × 6.2 160 (143) 8 × 6.2 190 (188) 265 45 8 × 6.2 95 (94) 8 × 10. 140 (105) 214 232 396 Case size φD × L 454 489 (mm) Size φ6.3 × 5.8 is available for capacitors marked. " " Size φ6.3 × 7.7 is available for capacitors marked. " " Size φ8 × 10 is available for capacitors marked. " " In this case, 6 will be put at 12th digit of type numbering system. 29 6.3 × 5.8 Rated ripple Rated Ripple (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Cap.(µF) Frequency 00 ~ 47V 100 ~ 1500 50 Hz 0.80 0.85 120 Hz 1.00 1.00 300 Hz 1.15 1.08 1 kHz 1.40 1.20 10 kHz~ 1.67 1.30 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please select UG(p.75) series if high CV products are required. Please refer to page 3 for the minimum order quantity. CAT.8100V