VECTRON TFS611A

Filename: tfs 611a.doc
Version 1.4
VI TELEFILTER
30.06.2005
Filter specification
TFS 611A
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance:
Input:
Output:
25
0
°C
dBm
75
75
Ω
Ω
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS611A is the minimum attenuation in the pass band. The maximum attenuation in the pass band
is defined as the insertion loss ae. The nominal frequency fN is fixed at 611MHz without tolerance or limit. The values of relative attenuation arel are
guaranteed in the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production
tolerance scheme.
Data
typ. value
Insertion loss
(reference level)
ae
4,3
Nominal frequency
fN
-
dB
fN
5,5
±
dB
611
MHz
3
MHz
600,0
14,0
10,0
5,75
9,0
49,0
MHz
MHz
MHz
MHz
MHz
MHz
15,0
MHz
max.
20
MHz
38
45
25
16
50
44
dB
dB
dB
dB
dB
dB
min.
min.
min.
min.
min.
min.
35
40
20
6
40
40
dB
dB
dB
dB
dB
dB
arel
Relative attenuation
+
+
+
max.
BW
Bandwidth
fN
fN
fN
fN
fN
fN
dB
9,8
Passband
40,0
tolerance / limit
...
...
...
...
...
...
fN
fN
fN
fN
fN
fN
+
+
+
14,0
10,0
7,75
9,0
49,0
639,0
MHz
MHz
MHz
MHz
MHz
MHz
2,2:1
VSWR
max.
max.
Input power level
Operating temperature range
OTR
Storage temperature range
Temperature coefficient of frequency
TCf *
2,5:1
15
-
+ 5 °C ... + 40 °C
-
- 40 °C ... + 85 °C
-33
ppm/K
dBm
-
*) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz)
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 611a.doc
Version 1.4
VI TELEFILTER
30.06.2005
Filter specification
TFS 611A
2/5
0
0
-10
-1
-20
-2
-30
-3
-40
-50
-60
-5
-6
-7
-80
-8
-90
-9
150
275
400
525
650
775
frequency in MHz
900
1025
1150
-10
605
1275
6
-4
-70
-100
25
9
VSWR
magnitude in dB
magnitude in dB
Filter characteristic
3
606.2
607.4
608.6
609.8
611
612.2
frequency in MHz
613.4
614.6
615.8
0
617
Construction and pin connection
(All dimensions in mm)
7
611A
● T26
1
SQ 3,81 + 0,2/-0,1
5
1
2
3
4
5
6
7
8
Ground
Input
Ground
Ground
Ground
Output
Ground
Ground
Date code:
T
U
V
...
Year + week
2005
2006
2007
3
7
5
0,1
12
0%
0,6
%
d
3
1,78
2,54
1
1,2 Max.
Date code
1,78
75 Ω Test circuit
L1
2
6
L2
SAW
1, 3, 4, 5, 7, 8
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 611a.doc
Version 1.4
VI TELEFILTER
30.06.2005
Filter specification
TFS 611A
3/5
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 – 3, with exeption of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters peer reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
3000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direc tion
Tape (all dimensions in mm)
W
: 12,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 5,50 ± 0,05
G(min)
: 0,75
P2
: 2,00 ± 0,05
P1
: 8,00 ± 0,1
D1(min)
: 1,50
Ao
: 4,30 ± 0,1
Bo
: 4,30 ± 0,1
Ct
: 9,5 ± 0,1
P1
t
Date Code
Po
P2
W
G
Ct
Bo
F
G
E
Do
Ko
Typ
PIN Marker
D1
Ao
W 2
Reel (all dimensions in mm)
A
: 330
W1
: 12,4 +2/-0
W2(max) : 18,4
N(min)
: 50
C
: 13,0 +0,5/-0,2
A
C
N
W 1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 611a.doc
Version 1.4
VI TELEFILTER
30.06.2005
Filter specification
TFS 611A
4/5
Air reflow temperature conditions
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
max. 300 s
10 ... 30 s
Time / s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 611a.doc
VI TELEFILTER
Version 1.4
Filter specification
30.06.2005
TFS 611A
5/5
History
Version
Reason of Changes
Name
Date
1.0
Generation of development specification
Pfeiffer
19.08.2003
1.1
Change passband
Add additional stop band values
Change package to 3,8*3,8 mm
Change packing to support the new package
Dr. Wall
28.08.2003
1.2
Change insertion loss to 5,5 dB
Change passband
Add VSWR
Add input power level
Change attenuation value
Roizengaft
18.02.2004
1.3
Add termination impedance of 75 Ω
Dr. Wall
12.03.2004
1.4
Add typical values and filter characteristic
Generation of filter specification
Strehl
30.06.2005
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.