ROHM RB085T-90

Schottky barrier diode
RB085T-90
Applications
Switching power supply
Dimensions (Unit : mm)
Structure
Features
1) Cathode common type.
(TO-220)
2) Low IR
(1) (2) (3)
3) High reliability
9
Construction
Silicon epitaxial planer
Absolute maximum ratings (Ta=25°C)
Parameter
Reverse voltage (repetitive peak)
Reverse voltage (DC)
Average rectified forward current (*1)
Forward current surge peak (60Hz / 1cyc) (*1)
Junction temperature
Storage temperature
Limits
Symbol
VRM
VR
Io
IFSM
Tj
Tstg
Unit
V
V
A
A
90
90
10
100
150
-40 to +150
C
C
(*1)Business frequencies, Rating of R-load, 1/2 Io per diode, Tc=122C
Electrical characteristic (Ta=25°C)
Parameter
Forward voltage
Reverse current
Thermal impedance
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
Symbol
VF
Typ.
-
Max.
0.83
150
Unit
V
IR
Min.
-
jc
-
-
2.5
C/W
1/3
A
Conditions
IF=5A
VR=90
junction to case
2010.02 - Rev.D
RB085T-90
Data Sheet
Electrical characteristic curves
Ta=150C
100000
Ta=125C
1
Ta=75C
Ta=25C
Ta=-25C
0.1
10000
Ta=125C
1000
Ta=75C
REVERSE CURRENT:IR(uA)
0.01
Ta=25C
10
Ta=-25C
1
10
FORWARD VOLTAGE : VF(mV)
VF-IF CHARACTERISTICS
20
30
40
50
60
70
80
90
0
750
AVE:766.6mV
Ta=25C
VR=90V
n=30pcs
160
140
120
100
80
60
AVE:14.3uA
40
500
490
480
470
0
450
RESERVE RECOVERY TIME:trr(ns)
1cyc
Ifsm
8.3ms
150
AVE:136.0A
50
1000
Ta=25C
IF=0.5A
IR=1A
Irr=0.25*IR
n=10pcs
25
20
15
10
5
AVE:7.40ns
0
0
Ifsm
8.3ms
100
1
trr DISPERSION MAP
100
Mounted on epoxy board
TRANSIENT
THAERMAL IMPEDANCE:Rth (℃/W)
PEAK SURGE
FORWARD CURRENT : IFSM(A)
Ifsm
t
100
10
10
TIME:t(ms)
IFSM-t CHARACTERISTICS
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
100
10
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
100
15
IF=5A
IM=100mA
D=1/2
time
300us
1ms
10
FORWARD POWER
DISSIPATION:Pf(W)
1000
8.3ms
1cyc
10
IFSM DISPERSION MAP
1
AVE:498.5pF
Ct DISPERSION MAP
30
100
510
IR DISPERSION MAP
300
200
520
460
VF DISPERSION MAP
Ta=25C
f=1MHz
VR=0V
n=10pcs
530
20
740
30
540
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
760
180
REVERSE CURRENT:IR(uA)
770
20
550
200
Ta=25C
IF=5A
n=30pcs
10
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
790
250
10
1
0
100 200 300 400 500 600 700 800 900
780
100
0.1
0.01
0
FORWARD VOLTAGE:VF(mV)
f=1MHz
100
0.001
PEAK SURGE
FORWARD CURRENT:IFSM(A)
1000
PEAK SURGE
FORWARD CURRENT:IFSM(A)
FORWARD CURRENT:IF(A)
Ta=150C
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
10
Rth(j-a)
1
Rth(j-c)
Sin(θ=180)
5
0
0.1
0.001
DC
10
0.01
0.1
1
10
TIME:t(s)
Rth-t CHARACTERISTICS
2/3
100
1000
0
5
10
15
20
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
Io-Pf CHARACTERISTICS
2010.02 - Rev.D
RB085T-90
10
30
6
Sin(θ=180)
D=1/2
4
DC
2
0
30
0A
Io
0A
Io
0V
VR
0V
VR
t
20
DC
T
D=t/T
VR=45V
Tj=150C
D=1/2
10
Sin(θ=180)
0
0
10
20
30
40
50
60
70
80
90
REVERSE VOLTAGE : V R(V)
VR-PR CHARACTERISTICS
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
8
REVERSE POWER
DISSIPATION:PR (W)
Data Sheet
t
20
DC
T
D=t/T
VR=45V
Tj=150C
D=1/2
10
Sin(θ=180)
0
0
25
50
75
100
125
AMBIENT TEMPERATURE : Ta(C)
Derating Curve"(Io-Ta)
150
0
25
50
75
100
125
150
CASE TEMPARATURE:Tc(C)
Derating Curve"(Io-Tc)
30
No break at 30kV
ELECTROSTATIC
DISCHARGE TEST ESD(KV)
25
20
15
10
AVE:5.30kV
5
0
C=200pF
R=0
C=100pF
R=1.5k
ESD DISPERSION MAP
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
3/3
2010.02 - Rev.D
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A