F E Solder Instruction D C B A b 1. Cable should be prepared for soldering. The cable/wires must be pretinned. b n1,16 (25x) 2. Insert cable/wire into solder cup. (5:1) 3. Operate the soldering iron at 350°C, 50 Watt max. and use a pencil tip. 4. Put tip to wire in solder cup. SEALING COMPOUND 5. After 1 second bring in solder. 6. Heat for 3 seconds longer. Do not heat contact more than 4 seconds in total. 8. Wait until solder gets rigid again. 9. Do not solder adjacent contacts consecutively, 0,8 alternate position within the connector to minimize heat build up. b D 9,5 `0,3 7. Remove soldering iron. 53,09 +- 0,33 0,43 6,13 +- 0,17 0,08 D 47,04 `0,13 8 +- 0,02 0,23 12,6 +- 0,33 0,43 38,5 +- 00,25 C C 10° 1,2 `0,2 b 4STD25SoM99A10X CONEC ABC Ø3,1 `0,1 SEE NOTE 4 B B NOTES: 1. METALSHELLS: COPPER ALLOY; min.315µin TIN over 40-80µin NICKEL 2. INSULATORS: PBT GF UL 94 V-0; BLACK b 3. CONTACTS: COPPER ALLOY; PLATING (SEE PART NO.): o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) SOLDER CUP ACCEPTS CABLE AWG 20 Directive 2002/95/EC RoHS compliant F E DO NOT ALTER CAD DRAWING BY HAND A THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 4. CONNECTOR IS PART MARKED: 4STD25SoM99A10X CONEC ABC (see note 3) scale: material: tolerance 2:1 (5:1) SEE NOTES dim. in mm date name drawn 03.08.12 Henneboel D-SUB FEMALE appd. 03.08.12 Fischer 25pos. SOLDER CUP for installation into water resistant hood dwg no: DIN- norm d-old 6xb Ä4411 a Original rev. description D A title: 18K1IB2A/18K2IB2A 03.08.2012 K.H. 15K1A1111 R date name part no: C A3 sh: 1 b 4STD25SoM99A10X (see note 3) B A