Features • • • • • • • • Regulated Converters Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (<75µA) 5000m Operation Active Power Factor Correction Connector Set available AC/DC Converter RACM100 Description 100 Watt 5 Enclosed Case Style Single Output 5Y The RACM100 is a compact 3.6”x2.44” high efficiency AC/DC power supply with 2xMOPP safety approval for medical applications. These space saving enclosed power supplies have an universal input voltage range (85-264VAC), 4kVAC isolation, require no minimum load and can be used at ambient temperatures of between -25°C and +85°C. The 12V, 15V, 24V or 48V output voltages are fully protected and have tolerances of less than ±0.2% over the entire input voltage range and less than ±0.5% over the entire load range. The RACM100 series is certified to medical safety standard IEC/ES/EN-60601-1 3rd Edition and feature BF rated outputs with less than 75µA leakage current. It has a built-in Class B EMI filter and comes with a five year warranty. wa EAR rranty Selection Guide Part Number Input Voltage Range (VAC) Output Output Input Power Voltage Current @ No Load (VDC)(A) (W) Efficiency typ. (%) RACM100-12S 85-264 128.34 0.3 91 RACM100-15S 85-264 156.67 0.3 92 RACM100-24S 85-264 244.17 0.3 92 RACM100-48S 85-264 482.09 0.3 91 Specifications (measured at TA= 25°C, 250VAC, full load and after warm-up) 2MOPP 250VAC BASIC CHARACTERISTICS Parameter Condition Min. Typ. 85VAC 120VDC Input Voltage Max. 264VAC 370VDC Input Current 115VAC, fulll load 230VAC, full load 1.15A 0.55A Absolute max. Input Current cold start, 230VAC 60A Input Frequency Range AC Input 47Hz 63Hz Start-up Time 1 Second Rise Time 20ms Hold up Time 115VAC, full load 0% Power Factor 0.95 Operating Frequency (measured @ 20MHz BW) EN-55011 Certified EN-55022 Certified ES-60601 Certified IEC/EN-60601 Certified 16ms Minimum Load Output Ripple and Noise E314885 60kHz 12VDC, with 10µF/25V MLCC 15VDC, with 10µF/25V MLCC 24VDC, with 1µF/50V MLCC 48VDC, with 0.1µF/100V MLCC 120mVp-p 150mVp-p 160mVp-p 340mVp-p continued on next page Refer to Applications Notes www.recom-power.com REV.: 2/2015 MED-1 RACM100 AC/DC Converter Series Specifications (measured at TA= 25°C, 250VAC, full load and after warm-up) Efficiency vs. Input Voltage Efficiency vs. Load 94 230VAC 92 Efficiency (%) Efficiency (%) 94 90 115VAC 88 86 84 10 20 30 40 50 60 70 80 100% Load 92 90 50% Load 88 86 84 85 90 110 130 150 170 190 230 240 250 264 90 100 Load (%) Input Voltage (V) Load vs. Input Voltage Power Factor vs. Load 1 125 80 60 40 20 85 230VAC Power Factor [ ] % of Full Load 100 100 115 130 145 160 175 115VAC 0 264 30 40 Input Voltage (V) 50 60 70 80 90 100 Load (%) REGULATIONS Parameter Condition Value Output Voltage Accuracy 230VAC, full load ±1% Line Voltage Regulation low line to high line, full load Load Voltage Regulation 0% to 100% load 10% to 100% load ±0.5% max. ±0.4% max. Transient Peak Deviation load step from 50% - 75% change at 2.5A/µs 3% Vout max. Transient Recovery Time load step from 50% - 75% change at 2.5A/µs 500µs typ. Output Voltage Trim ±0.2% ±10% PROTECTIONS Parameter Input Fuse Condition internal line and neutral Short Circuit Protection (SCP) Over Load Protection (OLP) Over Voltage Protection (OVP) Isolation Voltage continuous, auto-recovery % of Iout rated Hiccup Mode, 115% min. / 150% max. % of Vout nominal Latch Mode, 115% min. / 135% max. I/P to O/P I/P to Chassis O/P to Chassis working voltage Means of Protection Leakage Current Value T3.15A / 250VAC, slow blow type 4kVAC / 1 minute 1.5kVAC / 1 minute 1.5kVAC / 1 minute 250VAC / continuous 2MOPP 264VAC Medical Device Classification 75µA max. Type BF applied device continued on next page MED-2 REV.: 2/2015 www.recom-power.com RACM100 AC/DC Converter Series Specifications (measured at TA= 25°C, 250VAC, full load and after warm-up) Internal Clearance Creepage I/P to O/P I/P to O/P 8mm min. 8mmmin. Isolation Resistance 500VDC 100MW min. Insulation Grade Reinforced Insulation ENVIRONMENTAL Parameter Condition Relative Humidity Value non-condensing 5% to 95% RH with derating -25°C to +85°C Temperature Coefficient ±0.02% / °C Operating Temperature Range Operating Altitude 5000m max. MTBF (+25°C) according to MIL-HDBK-217F, full load 790.3 x 103 hours Derating Graph Output Current (%) 100 230VAC 80 115VAC 60 40 30 20 0 -25 0 20 40 60 55 80 100 85 Ambient Temperature (°C) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number T141119W01-E-1 1408016005 IEC/EN Medical Safety Standard IEC/EN-60601-1 Medical Report + ISO14971 Risk Assessment ANSI/AAMI Medical Safety E314885 ES60601-1 CAN/CSA Medical Safety E314885 C22.2 No. 60601-1 Certificate Type (Others) Conditions EMI Standard ESD Standard / Criterion Conducted CISPR 11, EN-55011, Class B Radiated CISPR 11, EN-55011, Class A Conducted and Radiated FCC18, Class B Air ±8kV; Contact ±6kV EN61000-4-2, Criteria A Radiated Immunity 20V/m EN61000-4-3, Criteria A Fast Transient ±2kV EN61000-4-4, Criteria A L-N ±1kV and L-PE/N-PE ±2kV EN61000-4-5, Criteria A 20Vr.m.s EN61000-4-6, Criteria A Surge Conducted Immunity Power Frequency Magnetic Field 10A/m Voltage Dip and Interruptions 100/230VAC, 50Hz EN61000-4-8, Criteria A 30% 500ms EN61000-4-11, EN60601-1-2, Criteria A >95% 10ms EN61000-4-11, EN60601-1-2, Criteria A >95% 5000ms EN61000-4-11, EN60601-1-2, Criteria B continued on next page www.recom-power.com REV.: 2/2015 MED-3 RACM100 AC/DC Converter Series Specifications (measured at TA= 25°C, 250VAC, full load and after warm-up) Harmonic Current full load EN61000-3-2; Class D Voltage Flicker EN61000-3-3, PASS Thermal Shock MIL-STD-810F Shock IEC68-2-27 Vibration IEC68-2-6 DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Case Material Aluminum Package Dimension (LxWxH) 91.4 x 62.0 x 39.2mm Package Weight 210g Dimension Drawing (mm) 24.5 Trim Adj. 62.0 FC 41.3 CON2 CON1 Top View CON1 - Input Pin1Line Pin3Neutral 22.1 Mates with JST housing: VHR-3N JST crimp terminals: SVH-21T-P1.1 76.2 FC 84.2 91.4 CON2 - Output Pin1,2-Vout Pin3,4+Vout Side View Tolerance: ±0.5mm FC: fixing center 1.20 39.2 Mates with JST housing: VHR-4N JST crimp terminals: SVH-21T-P1.1 continued on next page REV.: 2/2015 www.recom-power.com 0.4 MED-4 39.2 RACM100 AC/DC Converter 1.20 Series Specifications (measured at TA= 25°C, 250VAC, full load and after warm-up) Dimension Drawing (mm) 10.0 10.4 Bottom View 3.5 PACKAGING INFORMATION Parameter Packaging Dimension (LxWxH) Type Cardboard Box Packaging Quantity Value 418 x 258 x 105mm 10pcs Storage Temperature Range -40°C to +85°C The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 2/2015 MED-5