Filename: tfs 500a.doc Version 2.1 Vectron International 25.04.2013 Filter specification TFS 500A 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 150 150 °C dBm Ω Ω Characteristics Remark: The nominal frequency fN is fixed at 500.00 MHz. The insertion loss ae is defined as loss value determined at fN. Reference level for the relative attenuation arel of the TFS 500A is the insertion loss ae. All specified data are met within the operating temperature range. Data typ. value Insertion Loss (reference level) ae Nominal Frequency fN Bandwidth 3 2.3 tolerance / limit dB 3.5 - 500.00 dB MHz BW dB Relative Attenuation 62.5 MHz … 430.0 562.5 700.0 12.0 MHz 56 dB - arel 430.0 MHz MHz … 437.5 MHz 50 dB min. 45 dB MHz … 700.0 MHz 55 dB min. 50 dB MHz … 1000.0 MHz 52 dB min. 45 dB max. 10 dBm Input power level Operating Temperature Range OTR Storage Temperature Range Temperature Coefficient of Frequency TCf * min. 50 - - 40 °C ... + 85 °C - - 55 °C ... + 95 °C -73 ppm/K dB - *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz). Material: LiNbO3_64° black, so in principle pyrofree. Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 500a.doc Version 2.1 Vectron International 25.04.2013 Filter specification TFS 500A 2/5 Filter characteristic 0 0 -7 -5 -14 -21 magnitude in dB m a g n itu d e in d B -10 -15 -28 -35 -42 -20 -49 -56 -25 -63 -30 487 489.8 492.6 495.4 498.2 501 503.8 frequency in MHz 506.6 509.4 512.2 -70 1 515 101 201 301 401 501 601 frequency in MHz 701 801 901 1001 Construction and pin connection (All dimensions in mm) 6 7 5 500A ● D17 8 2 1 4 Ground Input Ground Ground Ground Output Ground Ground Date code: D E F ... Year + week 2013 2014 2015 3 1 ,0 +/-0,15 Date code 0,6 +/-0,15 7 3 ,0 +/-0,15 3 0,6 +/-0,15 1 ° 60 1 2 3 4 5 6 7 8 5 0,6 +/-0,15 3 ,0 +/-0,15 150 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 500a.doc Version 2.1 Vectron International 25.04.2013 Filter specification TFS 500A 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t Po P2 W G Ct Bo F G E Do PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 500a.doc Version 2.1 Vectron International 25.04.2013 Filter specification TFS 500A 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 500a.doc Vectron International Version 2.1 Filter specification 25.04.2013 TFS 500A 5/5 History Version Reason of Changes Name Date 1.0 Generation of development specification Channaa 18.10.2006 1.1 Generation of filter specification Added typical values Added filter characteristic Changed to relative attenuation Changed limit line scheme according to filter performance Martens 1.12.2006 1.2 Changed storage temperature range Strehl 09.05.2007 2.0 Changed pull off direction from reel Schönbein 11.05.2012 2.1 Remark on pyrofree material added to data table Schönbein 25.04.2013 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.