High-Reliability Products and Services HIGH-RELIABILITY Screened, Hi-Rel Versions of Standard Products: Full product traceability is maintained • • • Full assembly and material traceability by kit code Restricted material usage to one lot (die wafer lot, mold epoxy etc.) per kit All records maintained for a minimum of seven years Performance advantages of screened, Hi-Rel parts include: • • • • Guaranteed operation up to 105ºC * Guaranteed operation at -40ºC * Full parametric testing at room temperature and 85ºC Extremely low PPM failure rates * Please check with the factory for requests for lower or higher temperature operation. Standard reliability tests performed on every kit of product: • • • • 100% burn-in (HTRB) 48 hours minimum (According to JESD22-A108 or MIL-STD-883 Method 1015) 100% Post burn-in electrical tests at room temperature and 85ºC Thermal cycle (by sample or 100% for 20 cycles) MIL-STD-883 Method 1010 condition B or JESD22-A104 Percent defective allowance limitations Additional Services Offered: • • • • • 100% parametric datalog Thermal shock sample testing (MIL-STD-883 Method 1011) Reliability reports (by part type / package type) Can provide complete test report for the requirements of automotive AEC-Q101-004 Other reliability tests by specific request Contact us at [email protected] or your local Sales Representative for additional information about our High Reliability products and services. 78 Cherry Hill Drive, Beverly, MA 01915, (978) 524-6700 IXYS Integrated Circuits Division Hi-Rel www.ixysic.com January 28, 2013