GA300TD60S www.vishay.com Vishay Semiconductors Dual INT-A-PAK Low Profile “Half Bridge” (Standard Speed IGBT), 300 A FEATURES • Gen 4 IGBT technology • Standard: optimized for hard switching speed • Low VCE(on) • Square RBSOA • HEXFRED® antiparallel diode with ultrasoft reverse recovery characteristics • Industry standard package • Al2O3 DBC • UL approved file E78996 • Designed for industrial level Dual INT-A-PAK Low Profile • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRODUCT SUMMARY VCES 600 V IC DC at TC = 25 °C 530 A VCE(on) (typical) at 300 A, 25 °C 1.24 V Speed DC to 1 kHz Package DIAP low profile Circuit Half bridge BENEFITS • Increased operating efficiency • Performance optimized as output inverter stage for TIG welding machines • Direct mounting on heatsink • Very low junction to case thermal resistance ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Collector to emitter voltage VCES Continuous collector current IC (1) TEST CONDITIONS MAX. UNITS 600 V TC = 25 °C 530 TC = 80 °C 376 Pulsed collector current ICM 800 Clamped inductive load current ILM 800 Diode continuous forward current IF Gate to emitter voltage VGE Maximum power dissipation (IGBT) PD RMS isolation voltage VISOL A TC = 25 °C TC = 80 °C 219 145 ± 20 TC = 25 °C 1136 TC = 80 °C 636 Any terminal to case (VRMS t = 1 s, TJ = 25 °C) 3500 V W V Note (1) Maximum continuous collector current must be limited to 500 A to do not exceed the maximum temperature of terminals Revision: 12-Jun-15 Document Number: 93362 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GA300TD60S www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Collector to emitter breakdown voltage Collector to emitter voltage Gate threshold voltage Collector to emitter leakage current Diode forward voltage drop Gate to emitter leakage current SYMBOL VBR(CES) VCE(on) VGE(th) ICES VFM IGES TEST CONDITIONS MIN. TYP. MAX. UNITS VGE = 0 V, IC = 500 μA 600 - - VGE = 15 V, IC = 150 A - 1.04 1.15 VGE = 15 V, IC = 300 A - 1.24 1.45 VGE = 15 V, IC = 150 A, TJ = 125 °C - 0.96 1.06 VGE = 15 V, IC = 300 A, TJ = 125 °C - 1.22 1.42 VCE = VGE, IC = 250 μA 2.9 4.8 6.3 VGE = 0 V, VCE = 600 V - 0.02 0.75 VGE = 0 V, VCE = 600 V, TJ = 125 °C - 1.5 10 IFM = 150 A - 1.23 1.39 IFM = 300 A - 1.48 1.75 IFM = 150 A, TJ = 125 °C - 1.17 1.33 IFM = 300 A, TJ = 125 °C - 1.50 1.77 VGE = ± 20 V - - ± 200 nA MIN. TYP. MAX. UNITS - 9 - V mA V SWITCHING CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER Turn-on switching loss SYMBOL TEST CONDITIONS Eon IC = 300 A, VCC = 360 V, VGE = 15 V, Rg = 1.5 , L = 500 μH, TJ = 25 °C Turn-off switching loss Eoff - 90 - Total switching loss Etot - 99 - Turn-on switching loss Eon - 23 - Turn-off switching loss Eoff - 133 - Total switching loss Etot - 156 - - 442 - tr - 301 - td(off) - 406 - - 1570 - Turn-on delay time Rise time Turn-off delay time Fall time Reverse bias safe operating area Diode reverse recovery time td(on) mJ IC = 300 A, VCC = 360 V, VGE = 15 V, Rg = 1.5 , L = 500 μH, TJ = 125 °C ns tf RBSOA TJ = 150 °C, IC = 800 A, VCC = 400 V VP = 600 V, Rg = 22 VGE = 15 V to 0 V, L = 500 μH trr Diode peak reverse current Irr Diode recovery charge Qrr Diode reverse recovery time trr Diode peak reverse current Irr Diode recovery charge Qrr IF = 300 A, dIF/dt = 500 A/μs, VCC = 400 V, TJ = 25 °C IF = 300 A, dIF/dt = 500 A/μs, VCC = 400 V, TJ = 125 °C Fullsquare - 150 179 ns - 43 59 A - 3.9 6.3 μC - 236 265 ns - 64 80 A - 8.6 11.1 μC Revision: 12-Jun-15 Document Number: 93362 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GA300TD60S www.vishay.com Vishay Semiconductors THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL MIN. TYP. MAX. UNITS TJ, TStg -40 - 150 °C - - 0.11 - - 0.4 - 0.05 - case to heatsink: M6 screw 4 - 6 case to terminal 1, 2, 3: M5 screw 2 - 4 - 270 - Operating junction and storage temperature range IGBT Junction to case per leg Diode Case to sink per module RthJC RthCS °C/W Mounting torque Nm Weight Allowable Case Temperature (°C) 600 500 IC (A) 400 300 200 TJ = 125 °C TJ = 25 °C 100 0 0.25 160 140 120 100 80 60 40 20 0.75 1.00 1.25 1.50 1.75 0 2.00 200 300 400 500 600 Fig. 3 - Maximum DC IGBT Collector Current vs. Case Temperature 600 1.7 VGE = 12 V VGE = 15 V VGE = 18 V 1.6 1.5 400 A 1.4 VGE = 9 V 400 1.3 VCE (V) IC (A) 100 IC - Continuous Collector Current (A) 93362_03 Fig. 1 - Typical Output Characteristics, TJ = 25 °C, VGE = 15 V 500 DC 0 0.50 VCE (V) 93362_01 g 300 1.2 300 A 1.1 1.0 200 150 A 0.9 0.8 100 0.7 0 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 93362_02 VCE (V) Fig. 2 - Typical Output Characteristics, TJ = 125 °C 0.6 20 93362_04 40 60 80 100 120 140 160 TJ (°C) Fig. 4 - Typical IGBT Collector to Emitter Voltage vs. Junction Temperature, VGE = 15 V Revision: 12-Jun-15 Document Number: 93362 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GA300TD60S www.vishay.com Vishay Semiconductors 600 10 VCE = 20 V 500 TJ = 125 °C 1 TJ = 125 °C 300 ICES (mA) IC (A) 400 TJ = 25 °C 0.1 200 0.01 TJ = 25 °C 100 0.001 100 0 4 5 6 7 8 9 10 VGE (V) 93362_05 200 300 400 500 600 VCES (V) 93362_08 Fig. 8 - Typical IGBT Zero Gate Voltage Collector Current Fig. 5 - Typical IGBT Transfer Characteristics 5.5 600 500 4.5 400 IF (A) Vgeth (V) TJ = 25 °C 5.0 4.0 TJ = 125 °C 300 200 3.5 TJ = 125 °C 3.0 100 TJ = 25 °C 2.5 0 0.4 0.5 0.6 0.7 0.8 0.9 1.0 IC (mA) 93362_06 0 1000 100 10 1.5 2.0 2.5 Fig. 9 - Typical Diode Forward Characteristics Allowable Case Temperature (°C) 10 000 IC (A) 1.0 VFM (V) Fig. 6 - Typical IGBT Gate Threshold Voltage 160 140 120 DC 100 80 60 40 20 0 1 1 93362_07 0.5 93362_09 10 100 VCE (V) Fig. 7 - IGBT Reverse Bias SOA, TJ = 150 °C, VGE = 15 V, Rg = 22 0 1000 93362_10 40 80 120 160 200 240 IF - Continuous Forward Current (A) Fig. 10 - Maximum DC Forward Current vs. Case Temperature Revision: 12-Jun-15 Document Number: 93362 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GA300TD60S www.vishay.com Vishay Semiconductors 10 000 150 Switching Time (ns) Energy (mJ) 125 100 Eoff 75 50 25 tf 1000 td(on) td(off) tr Eon 100 0 0 50 100 150 200 250 300 IC (A) 93362_11 0 350 5 10 15 20 25 Rg (Ω) 93362_14 Fig. 14 - Typical IGBT Switching Time vs. Rg, TJ = 125 °C, IC = 300 A, VCC = 360 V, VGE = 15 V, L = 500 μH Fig. 11 - Typical IGBT Energy Loss vs. IC, TJ = 125 °C, VCC = 360 V, Rg = 1.5 , VGE = 15 V, L = 500 μH 300 10 000 260 TJ = 125 °C 240 1000 td(off) trr (ns) Switching Time (ns) 280 tf td(on) tr 100 220 200 180 160 TJ = 25 °C 140 120 10 0 50 100 150 200 250 300 IC (A) 93362_12 100 100 200 300 400 500 600 700 800 900 1000 350 dIF/dt (A/μs) 93362_15 Fig. 12 - Typical IGBT Switching Time vs. IC, TJ = 125 °C, VCC = 360 V, Rg = 1.5 , VGE = 15 V, L = 500 μH Fig. 15 - Typical Reverse Recovery Time vs. dIF/dt, VCC = 400 V, IF = 300 A 150 130 120 Eoff 125 110 90 80 Irr (A) Energy (mJ) 100 100 75 TJ = 125 °C 70 60 50 50 Eon 40 25 TJ = 25 °C 30 20 0 0 93362_13 5 10 15 20 10 100 200 300 400 500 600 700 800 900 1000 25 Rg (Ω) Fig. 13 - Typical IGBT Energy Loss vs. Rg, TJ = 125 °C, IC = 300 A, VCC = 360 V, VGE = 15 V, L = 500 μH 93362_16 dIF/dt (A/µs) Fig. 16 - Typical Reverse Recovery Current vs. dIF/dt, VCC = 400 V, IF = 300 A Revision: 12-Jun-15 Document Number: 93362 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GA300TD60S www.vishay.com Vishay Semiconductors 22 20 18 16 Qrr (μC) 14 TJ = 125 °C 12 10 8 6 TJ = 25 °C 4 2 0 100 200 300 400 500 600 700 800 900 1000 dIF/dt (A/μs) 93362_17 Fig. 17 - Typical Reverse Recovery Charge vs. dIF/dt, VCC = 400 V, IF = 300 A ZthJC - Thermal Impedance Junction to Case (°C/W) 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 DC 0.01 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) 93362_18 Fig. 18 - Maximum Thermal Impedance ZthJC Characteristics (IGBT) ZthJC - Thermal Impedance Junction to Case (°C/W) 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 DC 0.01 0.001 0.00001 93362_19 0.0001 0.001 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 19 - Maximum Thermal Impedance ZthJC Characteristics (Diode) Revision: 12-Jun-15 Document Number: 93362 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GA300TD60S www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code G A 300 T D 60 S 1 2 3 4 5 6 7 1 - Insulated Gate Bipolar Transistor (IGBT) 2 - A = Generation 4 IGBT 3 - Current rating (300 = 300 A) 4 - Circuit configuration (T = Half-bridge) 5 - Package indicator (D = Dual INT-A-PAK Low Profile) 6 - Voltage rating (60 = 600 V) 7 - Speed/type (S = Standard Speed IGBT) CIRCUIT CONFIGURATION 3 4 5 1 6 7 2 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95435 Revision: 12-Jun-15 Document Number: 93362 7 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000