Materials Declaration Package Body Size Ball Count Option Ball Size Item SiO2 Filler Epoxy resin Antimony oxide Carbon Black CSP_BGA 9X9 169 SnPbAg 0.4 mm Molding Compound % of Compound 75.0 20.0 3.0 1.5 Weight (g) 8.94 E-01 2.37 E-01 3.55 E-02 1.78 E-02 PPM 432724 114629 17194 8597 Laminate % of Laminate 25.0 25.0 19.0 12.2 11.0 7.8 Weight (g) 1.88 E-01 1.88 E-01 1.43 E-01 9.19 E-02 8.29 E-02 5.88 E-02 PPM 91201 91201 69315 44509 40129 28455 Sn Pb Ag Solder Ball % of Solder Ball 62.0 36.0 2.0 Weight (g) 2.95 E-02 1.71 E-02 9.52 E-04 PPM 14284 8294 461 Au Bond Wires % of Wire 99.99 Weight (g) 2.25 E-03 PPM 1089 Si Chip % of Chip 100.0 Weight (g) 1.06 E-02 PPM 5151 Die Attach % of Die Attach 70.0 20.0 5.0 5.0 Weight (g) 4.74 E-02 1.35 E-02 3.38 E-03 3.38 E-03 PPM 22937 6553 1638 1638 Item BT-Epoxy Glass Fiber Copper Solder Mask Nickel Gold Item Ag Filler Epoxy Resin Amine Silane Item Pb Cd Hg Cr+6 PBB PBDE Molding Compound Method PPM None Detected US EPA Method 3052. ICP-OES None Detected US EPA Method 3052. ICP-OES None Detected US EPA Method 3052. ICP-OES None Detected US EPA Method 3060A & 7196A. UV-VIS None Detected Analysis was performed by GC/MS None Detected Analysis was performed by GC/MS Item Pb Cd Hg Cr+6 PBB PBDE PPM None Detected None Detected None Detected None Detected None Detected None Detected Item Pb Cd Hg Cr+6 PBB PBDE PPM None Detected None Detected None Detected None Detected None Detected None Detected Die Attach Paste Method US EPA Method 3052. ICP-OES US EPA Method 3052. ICP-OES US EPA Method 3052. ICP-OES US EPA Method 3060A & 7196A. UV-VIS Analysis was performed by GC/MS Analysis was performed by GC/MS Laminate Method US EPA Method 3052. ICP-OES US EPA Method 3052. ICP-OES US EPA Method 3052. ICP-OES US EPA Method 3060A & 7196A. UV-VIS Analysis was performed by GC/MS Analysis was performed by GC/MS Package Totals Weight (g) PPM 1000000 2.07 E+00 Note: The information provided in this declaration are true to the best of ADI's knowledge. ADI derived most of the information listed in this declaration from documents provided by third parties, and assumes no liability to any inaccuracy of such information. ADI Proprietary 9/20/06