2.92mm Male Connector Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 TECHNICAL DATA SHEET PE4987 2.92mm Male Connector Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style 2.92mm Male PE-SR402AL,PE-SR402FL,RG402 Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 0.37 [9.4] 0.312 [8] Weight, lbs [g] 0.006 [2.72] Connector Type Contact Material and Plating Contact Plating Specification Coupling Nut Material and Plating Coupling Nut Plating Specification Hex Size, in. Torque, in-lbs [Nm] Body Material and Plating Body Plating Specification Dielectric Type 2.92mm Male Beryllium Copper, Gold 50µ in. minimum Stainless Steel, Gold 50µ in. minimum 5/16 8 [0.9] Stainless Steel, Gold 50µ in. minimum PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 2.92mm Male Connector Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 PE4987 PE4987 REV 1 2.92mm Male Connector Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 TECHNICAL DATA SHEET PE4987 Plotted and Other Data Notes: Values at 25 °C, sea level 2.92mm Male Connector Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 2.92mm Male Connector Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 PE4987 URL: http://www.pasternack.com/2.92mm-male-standard-pe-sr402al-pe-sr402fl-rg402-connector-pe4987-p.aspx PE4987 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4987 REV 3. INSTALL GASKET (4) ONTO BODY (3). INSERT INSULATOR (5) INTO BODY (3) & SLIDE COUPLING NUT OVER ASSEMBLY. 2. SOLDER CONTACT (1) TO CENTER CONDUCTOR. SLIDE COUPLING NUT (2) OVER CABLE. SLIDE BODY (3) OVER CONTACT UNTIL IT BOTTOMS OUT TO OUTER CONDUCTOR. SOLDER BODY (3) TO OUTER CONDUCTOR. 1. STRIP CABLE AS SHOWN. DO NOT NICK CENTER CONDUCTOR. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4987 DWG TITLE CAD FILE 061702 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 2.92mm Male Connector Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 PE4987 CAD Drawing 3