BDW24, BDW24A, BDW24B, BDW24C PNP SILICON POWER DARLINGTONS ● Designed for Complementary Use with BDW23, BDW23A, BDW23B and BDW23C ● 50 W at 25°C Case Temperature ● 6 A Continuous Collector Current ● Minimum hFE of 750 at 2 A, 3 V TO-220 PACKAGE (TOP VIEW) B 1 C 2 E 3 Pin 2 is in electrical contact with the mounting base. MDTRACA absolute maximum ratings at 25°C case temperature (unless otherwise noted) RATING SYMBOL Collector-base voltage (IE = 0) Collector-emitter voltage (IB = 0) BDW24B V CBO -60 -80 BDW24C -100 BDW24 -45 BDW24A BDW24B UNIT -45 BDW24 BDW24A VALUE VCEO -60 -80 V V -100 BDW24C VEBO -5 Continuous collector current IC -6 A Continuous base current IB -0.2 A Continuous device dissipation at (or below) 25°C case temperature (see Note 1) Ptot 50 W Continuous device dissipation at (or below) 25°C free air temperature (see Note 2) Ptot 2 W Tj -65 to +150 °C Tstg -65 to +150 °C TA -65 to +150 °C Emitter-base voltage Operating junction temperature range Storage temperature range Operating free-air temperature range V NOTES: 1. Derate linearly to 150°C case temperature at the rate of 0.4 W/°C. 2. Derate linearly to 150°C free air temperature at the rate of 16 mW/°C. MAY 1989 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. 1 BDW24, BDW24A, BDW24B, BDW24C PNP SILICON POWER DARLINGTONS electrical characteristics at 25°C case temperature (unless otherwise noted) PARAMETER V(BR)CEO ICEO ICBO IEBO hFE VCE(sat) VBE(sat) VBE(on) VEC Collector-emitter TEST CONDITIONS MIN -45 BDW24A -60 BDW24B -80 BDW24C -100 TYP MAX IC = -100 mA IB = 0 VCE = -30 V IB = 0 BDW24 -0.5 Collector-emitter VCE = -30 V IB = 0 BDW24A -0.5 cut-off current VCE = -40 V IB = 0 BDW24B -0.5 breakdown voltage (see Note 3) BDW24 V VCE = -50 V IB = 0 BDW24C -0.5 VCB = -45 V IE = 0 BDW24 -0.2 Collector cut-off VCB = -60 V IE = 0 BDW24A -0.2 current VCB = -80 V IE = 0 BDW24B -0.2 VCB = -100 V IE = 0 BDW24C -0.2 VEB = -5 V IC = 0 Emitter cut-off current Forward current transfer ratio -2 VCE = -3 V IC = -1 A VCE = -3 V IC = -2 A VCE = -3 V IC = -6 A Collector-emitter IB = -8 mA IC = -2 A saturation voltage IB = -60 mA IC = -6 A IB = -8 mA IC = -2 A Base-emitter saturation voltage Base-emitter VCE = -3 V IC = -1 A voltage VCE = -3 V IC = -6 A IE = -2 A IB = 0 Parallel diode forward voltage UNIT mA mA mA 1000 (see Notes 3 and 4) 750 20000 100 -2 (see Notes 3 and 4) -3 (see Notes 3 and 4) -2.5 -2.5 (see Notes 3 and 4) -3 -1.8 V V V V NOTES: 3. These parameters must be measured using pulse techniques, tp = 300 µs, duty cycle ≤ 2%. 4. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. thermal characteristics MAX UNIT RθJC Junction to case thermal resistance PARAMETER MIN TYP 2.5 °C/W RθJA Junction to free air thermal resistance 62.5 °C/W MAX UNIT resistive-load-switching characteristics at 25°C case temperature PARAMETER † TEST CONDITIONS † MIN ton Turn-on time IC = -3 A IB(on) = -12 mA IB(off) = 12 mA 1 µs toff Turn-off time VBE(off) = 4.5 V RL = 10 Ω tp = 20 µs, dc ≤ 2% 5 µs Voltage and current values shown are nominal; exact values vary slightly with transistor parameters. 2 TYP MAY 1989 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. BDW24, BDW24A, BDW24B, BDW24C PNP SILICON POWER DARLINGTONS TYPICAL CHARACTERISTICS TYPICAL DC CURRENT GAIN vs COLLECTOR CURRENT VCE(sat) - Collector-Emitter Saturation Voltage - V TCS125AD 40000 hFE - Typical DC Current Gain COLLECTOR-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT TC = -40°C TC = 25°C TC = 100°C 10000 1000 VCE = -3 V tp = 300 µs, duty cycle < 2% 100 -0·5 -1·0 TCS125AE -2·0 tp = 300 µs, duty cycle < 2% IB = IC / 100 -1·5 -1·0 -0·5 -10 TC = -40°C TC = 25°C TC = 100°C 0 -0·5 IC - Collector Current - A -1·0 -10 IC - Collector Current - A Figure 1. Figure 2. BASE-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT TCS125AF VBE(sat) - Base-Emitter Saturation Voltage - V -3·0 -2·0 TC = -40°C TC = 25°C TC = 100°C -2·5 -1·0 -1·5 IB = IC / 100 tp = 300 µs, duty cycle < 2% -0·5 -0·5 -1·0 -10 IC - Collector Current - A Figure 3. MAY 1989 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. 3 BDW24, BDW24A, BDW24B, BDW24C PNP SILICON POWER DARLINGTONS MAXIMUM SAFE OPERATING REGIONS MAXIMUM FORWARD-BIAS SAFE OPERATING AREA -100 SAS125AB IC - Collector Current - A DC Operation tp = 300 µs, d = 0.1 = 10% -10 -1·0 BDW24 BDW24A BDW24B BDW24C -0·1 -1·0 -10 -100 -1000 VCE - Collector-Emitter Voltage - V Figure 4. THERMAL INFORMATION MAXIMUM POWER DISSIPATION vs CASE TEMPERATURE TIS110AA Ptot - Maximum Power Dissipation - W 60 50 40 30 20 10 0 0 25 50 75 100 125 150 TC - Case Temperature - °C Figure 5. 4 MAY 1989 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. BDW24, BDW24A, BDW24B, BDW24C PNP SILICON POWER DARLINGTONS MECHANICAL DATA TO-220 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. TO220 4,70 4,20 ø 10,4 10,0 3,96 3,71 1,32 1,23 2,95 2,54 see Note B 6,6 6,0 15,90 14,55 see Note C 6,1 3,5 1,70 1,07 0,97 0,61 1 2 14,1 12,7 3 2,74 2,34 5,28 4,88 VERSION 1 0,64 0,41 2,90 2,40 VERSION 2 ALL LINEAR DIMENSIONS IN MILLIMETERS NOTES: A. The centre pin is in electrical contact with the mounting tab. B. Mounting tab corner profile according to package version. C. Typical fixing hole centre stand off height according to package version. Version 1, 18.0 mm. Version 2, 17.6 mm. MDXXBE MAY 1989 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. 5