SFH6700/01/02/05/11/12/19 Vishay Semiconductors High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt FEATURES SFH6700/6719 NC 1 A 2 C 3 NC 4 SFH6701/6711 8 VCC NC 1 7 VO 6 VE 5 GND 7 VO C 3 6 NC 5 GND NC 4 SFH6702/6712 NC 1 8 VCC A 2 SFH6705 NC 1 8 VCC 8 VCC A 2 7 NC A 2 7 NC C 3 6 VO C 3 6 VO NC 4 5 GND NC 4 5 GND i179073 DESCRIPTION The SFH67xx high speed optocoupler series consists of a GaAlAs infrared emitting diode, optically coupled with an integrated photo detector. The detector incorporates a Schmitt-Trigger stage for improved noise immunity. Using the enable input, the output can switched to the high ohmic state, which is necessary for data bus applications. A Faraday shield provides a common mode transient immunity of 1000 V/µ at VCM = 50 V for SFH6700/01/02/05 and 2500 V/µ at VCM = 400 V for SFH6711/12/19. The SFH67xx uses an industry standard DIP-8 package. With standard lead bending, creepage distance and clearance of ≥ 7.0 mm with lead bending options 6, 7, and 9 ≥ 8 mm are achieved. • Data rate 5.0 MBits/s (2.5 MBit/s over temperature) • Buffer • Isolation test voltage, 5300 VRMS for 1.0 s • TTL, LSTTL and CMOS compatible • Internal shield for very high common mode transient immunity • Wide supply voltage range (4.5 to 15 V) • Low input current (1.6 mA to 5 mA) • Three state output (SFH6700/19) • Totem pole output (SFH6701/02/11/12) • Open collector output (SFH6705) • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS • • • • • • • Industrial control Replace pulse transformers Routine logic interfacing Motion/power control High speed line receiver Microprocessor system interfaces Computer peripheral interfaces AGENCY APPROVALS • UL1577, file no. E52744 system code H or J, double protection • DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending available with option 1 ORDER INFORMATION PART REMARKS SFH6700 Three state output, DIP-8 SFH6701 Totem pole output, DIP-8 SFH6702 Totem pole output, DIP-8 SFH6705 Open collector output, DIP-8 SFH6711 Totem pole output, DIP-8 SFH6712 Totem pole output, DIP-8 SFH6719 Three state output, DIP-8 SFH6700-X009 Three state output, SMD-8 (option 9) SFH6701-X006 Totem pole output, DIP-8 400 mil (option 6) SFH6701-X007 Totem pole output, SMD-8 (option 7) SFH6701-X009 Totem pole output, SMD-8 (option 9) SFH6705-X006 Open collector output, DIP-8 400 mil (option 6) SFH6705-X007 Open collector output, SMD-8 (option 7) SFH6711-X007 Totem pole output, SMD-8 (option 7) Note For additional information on the available options refer to option information. Document Number: 83683 Rev. 1.5, 15-Apr-05 For technical questions, contact: [email protected] www.vishay.com 1 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt Vishay Semiconductors TRUTH TABLE (Positive Logic) PARTS IR DIODE ENABLE OUTPUT on H Z off H Z on L H off L SFH6700 SFH6719 L on SFH6701 SFH6702 SFH6705 SFH6711 SFH6712 H off L on H off L on H off L on H off L on H off L ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage VR 3.0 V DC forward current IF 10 mA INPUT t ≤ 1.0 µs Surge forward current Power dissipation IFSM 1.0 A Pdiss 20 mW OUTPUT Supply voltage VCC - 0.5 to + 15 V Three state enable voltage (SFH6700/19 only) VEN - 0.5 to + 15 V Output voltage VO - 0.5 to + 15 V Average output current IO 25 mA Pdiss 100 mW Storage temperature range Tstg - 55 to + 125 °C Ambient temperature range Tamb + 85 °C Power dissipation COUPLER Lead soldering temperature t = 10 s Isolation test voltage Tsld 260 °C VISO 5300 VRMS Pollution degree 2.0 Creepage distance and clearance Standard lead bending 7.0 mm Options 6, 7, 9 8.0 mm Comparative tracking index per DIN IEC 112/VDE 0303, part 1 Isolation resistance 175 VIO = 500 V, Tamb = 25 °C RIO 1012 Ω VIO = 500 V, Tamb = 100 °C RIO 1011 Ω Note Tamb = 25 °C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 83683 Rev. 1.5, 15-Apr-05 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt Vishay Semiconductors ICC ICC VCC (8) IF A (2) IO IE K (3) (2) IO VO (7) (3) GND (5) Shield SFH6700/19 SFH6702/12 ICC ICC VCC (8) IF A VCC (8) IF A (2) VO (6) K VEN (6) GND (5) Shield VCC (8) IF A IO IO (2) VO (7) K VO (6) K (3) (3) GND (5) Shield GND (5) Shield SFH6701/11 SFH6705 isfh6700_01 Fig. 1 - Schematics RECOMMENDED OPERATING CONDITIONS PARAMETER TEST CONDITION (1) PART SYMBOL MIN. MAX. UNIT VCC 4.5 15 V SFH6700 VEH 2.0 15 V SFH6719 VEH 2.0 15 V SFH6700 VEL 0 0.8 V SFH6719 VEL 0 0.8 V IFon 1.6 (2) 5.0 mA 0.1 mA Supply voltage Enable voltage high Enable voltage low Forward input current IFoff Tamb - 40 85 °C SFH6705 RL 350 4 kΩ SFH6705 N 16 LS TTL loads Operating temperature Output pull-up resistor Fan output RL = 1.0 kΩ TYP. Notes A 0.1 µF bypass capacitor connected between pins 5 and 8 must be used. (2) We recommended using a 2.2 mA to permit at least 20 % CTR degradation guard band. (1) Document Number: 83683 Rev. 1.5, 15-Apr-05 For technical questions, contact: [email protected] www.vishay.com 3 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt Vishay Semiconductors ELECTRICAL CHARACTERISTICS PARAMETER (1) TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 5.0 mA VF IF = 5.0 mA VF 1.6 1.75 V VCC = 5.0 V, IHYS = IFon - IFon IHYS 0.1 VR = 3.0 V IR 0.5 VR = 0 V, f = 1 MHz CO 60 pF RthJA 700 K/W INPUT Forward voltage Input current hysteresis Reverse current Capacitance Thermal resistance 1.8 V mA 10 µA OUTPUT Logic low output voltage IOL = 6.4 mA Logic high output voltage (except SFH6705) IOH = 2.6 mA, VOH = VCC - 1.8 V Output leakage current (VOUT > VCC) (except SFH6705) VO = 5.5 V, VCC = 4.5 V, IF = 5.0 mA Output leakage current (SFH6705 only) VO = 15 V, VCC = 15 V, IF = 5.0 mA VOL 2.4 100 µA VO = 15 V, VCC = 4.5 V, IF = 5.0 mA IOHH 1.0 500 µA VO = 5.5 V, VCC = 5.5 V, IF = 5.0 mA IOHH 0.5 100 µA IOHH 1.0 500 µA Logic low enable voltage (SFH6700/19 only) VEL High impedance state output current (SFH6700/19 only) Logic low supply current V 0.5 VEH Logic low enable current (SFH6700/19 only) V IOHH Logic high enable voltage (SFH6700/19 only) Logic high enable current (SFH6700/19 only) 0.5 2.0 V 0.8 V VEN = 2.7 V IEH 20 µA VEN = 5.5 V IEH 100 µA VEN = 15 V IEH 250 µA VEN = 0.4 V IEL - 320 VO = 0.4 V, VEN = 2.0 V, IF = 5.0 mA IOZL - 20 VO = 2.4 V, VEN = 2.0 V, IF = 0 mA IOZH 0.001 - 50 µA µA IOZH 20 µA 100 µA VO = 5.5 V, VEN = 2.0 V, IF = 0 mA IOZH 0.001 500 µA VCC = 5.5 V, IF = 0 ICCL 3.7 6.0 mA VCC = 15 V, IF = 0 ICCL 4.1 6.5 mA VCC = 5.5 V, IF = 5.0 mA ICCH 3.4 4.0 mA VCC = 15 V, IF = 5.0 mA ICCH 3.7 5.0 Logic low short circuit output current (2) VO = VCC = 5.5 V, IF = 0 IOSL 25 VO = VCC = 15 V, IF = 0 IOSL 40 Logic high short circuit output current (2) VCC = 5.5 V, VO = 0 V, IF = 5.0 IOSL - 10 VCC = 15 V, VO = 0 V, IF = 5.0 IOSL - 25 Logic high supply current mA mA mA mA mA RthJA 300 K/W f = 1 MHz, pins 1 to 4 and 5 to 8 shorted together CIO 0.6 pF VIO = 500 V, Tamb = 25 °C RIO 1012 Ω VIO = 500 V, Tamb = 100 °C RIO 1011 Ω Thermal resistance COUPLER Capacitance (input to output) Isolation resistance Notes (1) - 40 °C ≤ T amb ≤ 85 °C; 4.5 V ≤ VCC ≤ 15 V; 1.6 mA ≤ IFon ≤ 5.0 mA; 2.0 ≤ VEH ≤ 15 V; 0 ≤ VEL ≤ 0.8 V; 0 mA ≤ IFoff ≤ 0.1 mA. Typical values: Tamb = 25 °C; VCC = 5.0 V; IFon = 3.0 mA unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. (2) Output short circuit time ≤ 10 ms. www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 83683 Rev. 1.5, 15-Apr-05 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt SWITCHING CHARACTERISTICS PARAMETER Vishay Semiconductors (1) TEST CONDITION PART Without peaking capacitor SYMBOL MIN. TYP. MAX. UNIT tPHL 120 tPHL 115 tPLH 125 tPLH 90 Output enable time to logic high (SFH6700/19) (2) tPZH 20 ns Output enable time to logic low (SFH6700/19) (2) tPZL 25 ns Output disable time from logic low (SFH6700/19) (2) tPLZ 50 ns Propagation delay time to logic low output level, SFH6700/01/02/11/12/19 (2) With peaking capacitor ns 300 ns 300 ns ns Output rise time (2) 10 % to 90 % tr 40 ns Output fall time (2) 90 % to 10 % tf 10 ns Propagation delay time to logic low output level (3) Output rise time (3) Without peaking capacitor SFH6705 tPHL 115 With peaking capacitor SFH6705 tPHL 105 ns Without peaking capacitor SFH6705 tPLH 125 With peaking capacitor SFH6705 tPLH 90 10 % to 90 % tr 25 ns 90 % to 10 % tr 4 ns 300 ns 300 ns ns Notes (1) 0 °C ≤ T amb ≤ 85 °C; 4.5 V ≤ VCC ≤ 15 V; 1.6 mA ≤ IFon ≤ 5.0 mA; 2.0 ≤ VEH ≤ 15 V (SFH6700/19); 0 ≤ VEL ≤ 0.8 V (SFH6700/19); 0 mA ≤ IFoff ≤ 0.1 mA (2) Typical values: T (4) amb = 25 °C; VCC = 5.0 V; IFon = 3.0 mA unless otherwise specified (3) Typical values: T (4) amb = 25 °C, VCC = 5.0 V; IFon = 3.0 mA; RL = 390 Ω unless otherwise specified (4) A 0.1 µF bypass capacitor connected between pins 5 and 8 must be used COMMON MODE TRANSIENT IMMUNITY PARAMETER TEST CONDITION |VCM| = 50 V, IF = 1.6 mA Logic high common mode transient immunity |VCM| = 400 V, IF = 1.6 mA (1) PART SYMBOL MIN. SFH6700 |CMH| (2) 1000 V/µs SFH6701 |CMH| (2) 1000 V/µs SFH6702 |CMH| (2) 1000 V/µs SFH6705 |CMH| (2) 1000 V/µs SFH6711 |CMH| (2) 2500 V/µs SFH6712 |CMH| (2) |CMH| (2) |CML| (3) |CML| (3) |CML| (3) |CML| (3) |CML| (3) |CML| (3) |CML| (3) 2500 V/µs 2500 V/µs 1000 V/µs 1000 V/µs 1000 V/µs 1000 V/µs 2500 V/µs 2500 V/µs 2500 V/µs SFH6719 |VCM| = 50 V, IF = 0 mA SFH6700 SFH6701 Logic Low common mode transient immunity |VCM| = 50 V, IF = 0 mA SFH6702 SFH6705 SFH6711 |VCM| = 400 V, IF = 0 mA SFH6712 SFH6719 TYP. MAX. UNIT Notes (1) T amb = 25 °C, VCC = 5.0 V (2) CM is the maximum slew rate of a common mode voltage V H CM at which the output voltage remains at logic high level (VO > 2.0 V) (3) CM is the maximum slew rate of a common mode voltage V L CM at which the output voltage remains at logic high level (VO < 0.8 V) Document Number: 83683 Rev. 1.5, 15-Apr-05 For technical questions, contact: [email protected] www.vishay.com 5 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt Vishay Semiconductors TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 5 VO - Output Voltage (V) Ptot - Power dissipation (mW) 150 120 Detector 100 75 50 Emitter 25 0 - 60 - 40 - 20 0 20 40 60 80 3 1 IOL = 6.4 mA 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 IF -Input Current (mA) isfh6700_05 Fig. 2 - Permissible Total Power Dissipation vs. Temperature Fig. 5 - Typical Output Voltage vs. Forward Input Current (except SFH6705) 6 10.000 5 VO - Output Voltage (V) IF - Forward Current (mA) IOH = - 2.6 mA 2 100 Tamb - Temperature (°C) isfh6700_02 VCC = 4.5 V 4 1.000 0.100 0.010 1.3 1.4 1.5 1.6 4 3 2 RL =1 to 4 kΩ RL = 390 Ω 1 0 0.0 1.7 VF - Forward Voltage isfh6700_03 VCC = 5 V 0.2 0.4 0.6 0.8 IF - Forward Input Current (mA) isfh6700_06 Fig. 3 - Typical Input Diode Forward Current vs. Forward Voltage 1.0 Fig. 6 - Typical Output Forward Voltage vs. Forward Input Current (only SFH6705) IF = 5 mA 1.70 1.65 1.60 1.55 1.50 1.45 - 60 isfh6700_04 - 40 - 20 0 20 40 60 80 100 Tamb - Temperature (°C) Fig. 4 - Typical Forward Input Voltage vs. Temperature www.vishay.com 6 ICC - Supply Curent (mA) VF - Forward Voltage (V) 1.75 4.2 ICCL at VCC = 15 V 4.0 ICCH at VCC = 15 V & ICCL at VCC = 5.5 V 3.8 3.6 ICCH at VCC = 5.5 V 3.4 3.2 - 60 isfh6700_07 - 40 - 20 0 20 40 60 80 100 Tamb - Temperature (°C) Fig. 7 - Typical Supply Current vs. Temperature For technical questions, contact: [email protected] Document Number: 83683 Rev. 1.5, 15-Apr-05 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt Vishay Semiconductors 1000 900 IOH - High Level Output Current - mA IOHH - Output Leakage Current (nA) 0 1100 VCC = VO = 15 V 800 700 600 500 VCC = VO = 5.5 V 400 - 60 - 40 - 20 0 20 40 60 80 100 -3 -4 -5 VOH = 2.4 V -6 -7 -40 33 VOL = 0.8 V 30 28 VOL = 0.6 V 25 23 VOL = 0.4 V 20 -60 -40 -20 0 20 40 60 80 100 Tamb - Temperature (°C) isfh6700_09 0.20 IO = 16 mA 0.15 IO = 12.8 mA IO = 9.6 mA 0.10 0.05 -60 isfh6700_10 IO = 6.4 mA -40 -20 0 20 40 60 60 60 54 VCC = 5 V 48 IF = 3 mA 42 36 30 tR 24 18 12 tF 6 0 -60 -40 -20 0 20 40 60 Tamb - Temperature (°C) 80 100 80 100 80 100 150 VCC = 5 V C = 15 pF (without peaking capacitor) IF = 3 mA 110 IF = 5 mA 90 70 -60 isfh6700_13 Fig. 10 - Typical Low Level Output Voltage vs. Temperature IF = 1.6 mA 130 Tamb - Temperature (°C) Document Number: 83683 Rev. 1.5, 15-Apr-05 40 Fig. 12 - Typical Rise, Fall Time vs. Temperature (except SFH6705) tPLH - Propagation Delay - ns VOL - Low Level Output Voltage - V 0.25 VCC = 5 V IF = 0 mA 20 isfh6700_12 Fig. 9 - Typical Low Level Output Current vs. Temperature 0.30 tR, tF -Rise, Fall Time - ns IOL - Low Level Output Current (mA) 40 35 0 Fig. 11 - Typical High Level Output Current vs. Temperature (except SFH6705) Fig. 8 - Typical Output Leakage Current vs. Temperature VCC = 5 V IF = 0 mA -20 Tamb - Temperature (°C) isfh6700_11 38 VCC = 4.5 V IF = 5 mA VOH = 2.7 V -2 -8 -60 Tamb - Temperature (°C) isfh6700_08 -1 -40 -20 0 20 40 60 80 100 Tamb - Temperature (°C) Fig. 13 - Typical Propagation Delay to Logic High vs. Temperature (except SFH6705) For technical questions, contact: [email protected] www.vishay.com 7 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt 160 tPLH - Propagation Delay - ns 180 VCC = 5 V C1 = 15 pF (without peaking capacitor) 140 IF = 5 mA 120 IF = 3 mA 100 IF = 1.6 mA 80 60 -60 -40 isfh6700_14 -20 0 20 40 60 Tamb - Temperature (°C) 80 tPLH - Propagation Delay - ns VCC = 5 V C1 = 120 pF (without peaking capacitor) 80 IF = 1.6, 3 and 5 mA 60 50 -60 -40 -20 0 20 40 60 80 100 Tamb - Temperature (°C) isfh6700_15 IF = 3 mA 80 IF = 5 mA 70 60 50 -60 -40 170 VCC = 5 V C1 = 120 pF (without peaking capacitor) 130 90 70 50 -60 IF = 3 mA isfh6700_16 IF = 5 mA IF = 1.6 mA -40 -20 0 20 40 60 80 100 Tamb - Temperature (°C) Fig. 16 - Typical Propagation Delay to Logic Low vs. Temperature www.vishay.com 8 20 40 60 80 100 170 VCC = 5 V C1 = 15 pF (without peaking capacitor) 150 130 IF = 5 mA 110 IF = 3 mA 90 IF = 1.6 mA 70 50 -60 -40 -20 0 20 40 60 80 100 Tamb - Temperature (°C) Fig. 18 - Typical Propagation Delays to Logic Low vs.Temperature tPLH - Propagation Delay - ns tPHL - Propagation Delay - ns Fig. 15 - Typical Propagation Delays to Logic High vs. Temperature (except SFH6705) 110 0 Tamb - Temperature (°C) isfh6700_18 150 -20 Fig. 17 - Typical Propagation Delays to Logic High vs. Temperature 100 70 IF = 1.6 mA 90 isfh6700_17 Fig. 14 - Typical Propagation Delay to Logic Low vs. Temperature (except SFH6705) 90 VCC = 15 V C1 = 15 pF (without peaking capacitor) 100 tPHL - Propagation Delay - ns tPHL - Propagation Delay - ns Vishay Semiconductors 80 70 VCC = 5 V C1 = 120 pF (without peaking capacitor) 60 50 IF = 1.6, 3 and 5 mA 40 30 -60 isfh6700_19 -40 -20 0 20 40 60 80 100 Tamb - Temperature (°C) Fig. 19 - Typical Propagation Delays to Logic High vs. Temperature For technical questions, contact: [email protected] Document Number: 83683 Rev. 1.5, 15-Apr-05 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt 250 VCC = 15 V 160 C1 = 120 pf (Peaking Capacitor is used) 140 120 IF = 5 mA IF = 3 mA 100 80 IF = 1.6 mA 60 -60 -40 -20 0 20 40 60 80 200 tPLH at R L ˇ= 4 kΩ 150 tPHL at R L = 350 - 4ˇ kΩ tPLH at R L =ˇ 35 kΩ 50 1 40 VCC = 4.5 V 30 20 10 tPZL 0 -60 -40 isfh6700_21 VCC = 4.5 –15 V -20 0 20 40 60 Tamb - Temperature (°C) 80 tP - Enable Propagation Delay - ns CL = 15 pF 60 VCC = 4.5 V 50 tPHZ 40 30 VCC = 4.5 V –15 V 20 10 0 -60 isfh6700_22 VCC = 15 V -40 -20 0 20 40 tPZH tPHZ 60 80 Fig. 22 - Typical Logic High Enable Propagation Delays vs. Temperature (only SFH6700/11) Document Number: 83683 Rev. 1.5, 15-Apr-05 160 ˇ RL = 4 kΩ 140 RL = 1 ˇkΩ 11 120 RL = 350ˇkΩ 100 80 -60 -40 -20 0 20 40 60 80 100 TA - Temperature - °C Fig. 24 - Typical Propagation Delays to High Level vs. Temperature (only SFH6705) 140 130 VCC = 5 V ˇ RL = 350 - 4 kΩ IF = 5 mA 120 110 IF = 3 mA 100 IF = 1.6 mA 90 80 70 -60 100 Tamb - Temperature (°C) 9 VCC = 5 V IF = 3 mA isfh6700_24 80 7 180 100 Fig. 21 - Typical Logic Low Enable Propagation Delays vs. Temperature (only SFH6700/11) 70 200 tPHL - Propagation Delay - ns tp - Enable Propagation Delay - ns VCC = 15 V tPLZ 220 tPLH - Propagation Delay - ns CL = 15 pF 5 IF - Pulse Input Current - mA Fig. 23 - Typical Propagation Delays vs. Pulse Input Current (only SFH6705) 80 60 3 isfh6700_23 Fig. 20 - Typical Propagation Delays to Logic Low vs. Temperature (except SFH6705) 70 tPLH at R L = 1 ˇkΩ 100 100 Tamb - Temperature (°C) isfh6700_20 VCC = 5 V tP - Propagation Delay - ns tPHL -Propagation Delay - ns 180 50 Vishay Semiconductors isfh6700_25 -40 -20 0 20 40 60 80 100 TA - Temperature - °C Fig. 25 - Typical Propagation Delays to Low Level vs. Temperature (only SFH6705) For technical questions, contact: [email protected] www.vishay.com 9 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt Vishay Semiconductors tR, tF -Rise, Fall Time - ns 250 225 VCC = 5V tR @ RL = 4 kΩ 200 tR @ RL = 1 kΩ 50 tR @ RL = 350 kΩ 25 0 tF @ RL = 350-4 kΩ -25 -60 -40 isfh6700_26 -20 0 20 40 60 80 100 TA - Temperature - °C Fig. 26 - Typical Rise, Fall Time vs. Temperature (only SFH6705) 5V VCC R3 = 619 Ω Pulse generator tr, tf = 5 ns f = 100 kHz 10% Duty cycle IF VCC 8 Out* 7 1 2 Input IF Monitoring Node 3 En* 4 Gnd 6 Output Vo Monitoring Node D1 0.1 µF Bypass D2 D3 5 D4 C2 = 15 pF R2 = 5 kΩ R1 C1 = 120 pF The Probe and Jig Capacitances are included in C1 and C2 R1 IF (ON) 2.15 kΩ 1.6 mA 1.1 kΩ 3 mA 681 Ω 5 mA All diodes are 1N916 or 1N3064 * SFH6701/02/11/12 without VEN * SFH6702/12 Pin 6 VOUT and Pin 7 NC IFon 50 % IFon 0 mA Input IF VOH Output VO isfh6700_27 1.3 V tPLH VOL tPHL Fig. 27 Test Circuit for tPLH, tPHL, tr and tf www.vishay.com 10 For technical questions, contact: [email protected] Document Number: 83683 Rev. 1.5, 15-Apr-05 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt VCC Pulse generator tr, tf = 5 ns Zo = 50 Ω Vishay Semiconductors 5V RL VCC 8 1 IF NC 7 2 Input IF Monitoring Node VOUT 3 4 Gnd 0.1 µF Bypass 6 Output VO Monitoring Node 5 C2 = 15 pF R1 C1 = 120 pF The Probe and Jig Capacitances are included in C1 and C2 R1 IF (ON) 2.15 kΩ 1.6 mA 1.1 kΩ 3 mA 681 Ω 5 mA IFon 50 % IFon 0 mA Input IF VOH Output VO 1.3 V isfh6700_28 VOL tPHL tPLH Fig. 28 Test Circuit for tPLH, tPHL, tr and - SFH6705 VCC Pulse generator ZO = 50 Ω tr, tf = 5 ns IF 1 2 Input VC Monitoring Node VCC 8 Out 7 3 En 4 Gnd 6 5 5V Output VO S1 Monitoring Node 619 Ω D1 5 kΩ D2 D3 D4 0.1 µF C1 Bypass S2 C1 = 15 pF including Probe and Jig Capacitances All diodes are 1N916 or 1N3064 3.0 V 1.3 V 0V Input VEN Output VO S1 closed S2 open 1.3 V 0.5 V S1 and S2 closed VOL t PZL tPLZ 0.5 V S1 open Output VO S2 closed isfh6700_29 1.3 V t PZH VOH ca. 1.5 V S1 and S2 closed 0V t PHZ Fig. 29 Test Circuit for tPHZ, tPZH, tPLZ and tPZL - SFH6700/19 Document Number: 83683 Rev. 1.5, 15-Apr-05 For technical questions, contact: [email protected] www.vishay.com 11 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt Vishay Semiconductors VCC Vcc 8 Out* 7 1 A 2 B R 3 En* 4 Gnd + Pulse Generator Output VO Monitoring Node 0.1 µF Bypass 6 5 – VCM * SFH6701/02/11/12 without VEN * SFH6702/12 Pin 6 VOUT and Pin 7 NC 400 V / 50 V VCM 0V Switch at A: IF = 1.6 mA VOH VO (min.) Output VO VO (max.) VOL isfh6700_30 Switch at B: IF = 0 mA Fig. 30 Test Circuit for Common Mode Transient Immunity and Typical Waveforms - SFH6700/01/02/11/12/19 VCC 1 8 2 n.c. 7 3 6 5V RL A B R Out 4 Gnd + Pulse Generator 0.1μF Bypass Output VO Monitoring Node 5 – VCM 50 V VCM 0V VOH Switch at A: IF = 1.6 mA VO (min) Output VO VOL isfh6700_31 VO (max) Switch at B: IF = 0 mA Fig. 31 Test Circuit for Common Mode Transient Immunity and Typical Waveforms - SFH6705 www.vishay.com 12 For technical questions, contact: [email protected] Document Number: 83683 Rev. 1.5, 15-Apr-05 SFH6700/01/02/05/11/12/19 High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) Pin one ID 4 3 2 5 6 7 1 0.255 (6.48) 0.268 (6.81) 8 ISO Method A 0.379 (9.63) 0.390 (9.91) 0.030 (0.76) 0.045 (1.14) 0.300 (7.62) 0.031(0.79) 4° Typ. Typ. 0.130 (3.30) 0.150 (3.81) 0.050 (1.27) 0.018 (0.46) 0.022 (0.56) 10° 0.020 (0.51) 0.035 (0.89) 0.100 (2.54) Typ. i178006 3° to 9° 0.110 (2.79) 0.130 (3.30) 0.230 (5.84) 0.250 (6.35) 0.008 (0.20) 0.012 (0.30) Option 6 Option 7 Option 9 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.300 (7.62) typ. 0.375 (9.53) 0.395 (10.03) 0.300 (7.62) ref. 0.028 (0.7) min. 0.180 (4.6) 0.160 (4.1) 0.0040 (0.102) 0.315 (8.0) min. 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) Document Number: 83683 Rev. 1.5, 15-Apr-05 0.331 (8.4) min. 0.406 (10.3) max. 0.012 (0.30 ) typ. 0.0098 (0.249) 0.020 (0.51) 0.040 (1.02) 0.315 (8.00) min. For technical questions, contact: [email protected] 15° max. 18450 www.vishay.com 13 SFH6700/01/02/05/11/12/19 Vishay Semiconductors High Speed Optocoupler, 5 MBd, 1 kV/µs dV/dt OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 14 For technical questions, contact: [email protected] Document Number: 83683 Rev. 1.5, 15-Apr-05 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1