STMICROELECTRONICS STP16C596

STP16C596
16-BIT CONSTANT CURRENT LED SINK DRIVER
■
■
■
■
■
■
■
■
16 CONSTANT CURRENT OUTPUT
CHANNELS
ADJUSTABLE OUTPUT CURRENT
THROUGH EXTERNAL RESISTOR
SERIAL DATA IN/PARALLEL DATA OUT
SERIAL OUT CHANGE STATE ON THE
FAILING EDGES OF CLOCK
OUTPUT CURRENT: 15-120 mA
25 MHz CLOCK FREQ.
AVAILABLE IN HIGH THERMAL TSSOP
EXPOSED PAD
EFFICIENCY PACKAGE
DESCRIPTION
The STP16C596 is a monolithic, medium-voltage,
low current power 16-bit shift register designed for
LED panel displays. The STP16C596 contains a
16-bit serial-in, parallel-out shift register that feeds
a 16-bitD-type storage register. In the output
stage, sixteen regulated current sources are
designed to provide 15-120mA constant current to
drive the LEDs.
The serial output change state on the failing edges
of clock, this special feature will provide an
improved performance of the application when the
clock signal is skewed because the daisy chain is
too long.
DIP-24
SO-24
TSSOP24
TSSOP24
(exposed pad)
Through an external resistor, users may adjust the
STP16C596 output current, controlling in this way
the light intensity of LEDs.
The STP16C596 guarantees a 16V output driving
capability, allowing users to connect more LEDs in
series. The high clock frequency, 25 MHz, also
satisfies the system demand for high volume data
transmission. Compared with a standard TSSOP
package, the TSSOP exposed pad increases heat
dissipation capability by a 2.5 factor.
Table 1: Order Codes
Part Number
Package
Comments
STP16C596B1R
STP16C596M
STP16C596MTR
STP16C596TTR
STP16C596XTTR
DIP-24
SO-24 (Tube)
SO-24 (Tape & Reel)
TSSOP24 (Tape & Reel)
TSSOP24 Exposed-Pad (Tape & Reel)
15 parts per tube
40 parts per tube
1000 parts per reel
2500 parts per reel
2500 parts per reel
August 2004
Rev. 5
1/18
STP16C596
Table 2: Current Accuracy
Current accuracy
Output Voltage
≥ 0.7V
Output Current
Between bits
Between ICs
TYP. ± 3%
± 10%
15 to 120 mA
Figure 1: Pin Connection
Table 3: Pin Description
PIN N°
Symbol
1
2
3
4
5-20
21
22
23
24
GND
SDI
CLK
/LE
OUT 0-15
/OE
SDO
R-EXT
VDD
2/18
Name and Function
Ground Terminal
Serial data input terminal
Clock input terminal
Latch input terminal
Output terminal
Input terminal of output enable (active low)
Serial data out terminal
Input terminal of an external resistor for constant current programing
Supply voltage terminal
STP16C596
Table 4: Absolute Maximum Ratings
Symbol
Parameter
Value
Unit
V
VDD
Supply Voltage
0 to 7
VO
Output Voltage
-0.5 to 16
V
IO
Output Current
120
mA
VI
Input Voltage
IGND
GND Terminal Current
-0.4 to VDD+0.4
V
1920
mA
fCLK
Clock Frequency
25
MHz
TOPR
Operating Temperature Range
-40 to +125
°C
TSTG
Storage Temperature Range
-65 to +150
°C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Under these conditions, functional operation
is not implied.
Table 5: Thermal Data
Symbol
Parameter
DIP-24
SO-24
TSSOP24
TSSOP24
(exposed pad)
Unit
60
75
85
37.5
°C/W
Rthj-amb Thermal Resistance Junction-ambient
Table 6: Recommended Operating Conditions
Symbol
Parameter
Test Conditions
VDD
Supply Voltage
VO
Output Voltage
IO
Output Current
OUTn
IOH
Output Current
IOL
Output Current
VIH
Input Voltage
VIL
Input Voltage
Min.
Typ.
Max.
Unit
4.5
5.0
5.5
V
16.0
V
120
mA
SERIAL-OUT
+1
mA
SERIAL-OUT
-1
mA
0.7VDD
VDD+0.3
V
-0.3
0.3VDD
V
VDD = 4.5 to 5.5V
5
twLAT
/LE Pulse Width
twCLK
CLK Pulse Width
20
ns
twEN
/OE Pulse Width
400
ns
tSETUP(D) Setup Time for DATA
tHOLD(D)
Hold Time for DATA
tSETUP(L) Setup Time for LATCH
fCLK
Clock Frequency
20
ns
20
ns
15
ns
15
Cascade Operation
ns
25
MHz
3/18
STP16C596
Table 7: Electrical Characteristics (VDD=5V, T = 25°C, unless otherwise specified.)
Symbol
Max.
Unit
VIH
Input Voltage High Level
Parameter
Test Conditions
0.7VDD
VDD
V
VIL
Input Voltage Low Level
GND
0.3VDD
V
IOH
Output Leakage Current
VOL
Output Voltage (Serial-OUT) IOL = 1mA
VOH
Output Voltage (Serial-OUT) IOH = -1mA
IOL1
Output Current
VO = 0.7V REXT = 910 Ω
VO = 0.7V REXT = 360 Ω
Output Current Error
between bit (All Output ON)
VO = 0.7V REXT = 910 Ω
VO = 0.7V REXT = 360 Ω
IOL2
∆IOL1
∆IOL2
RSIN(up)
Min.
Typ.
VOH = 16 V
10
µA
0.4
V
VDD-0.4V
Pull-up Resistor
RSIN(down) Pull-down Resistor
V
18.6
20.4
22.4
mA
45.7
50.2
55.2
mA
±3
±4
%
±3
±4
%
150
300
600
KΩ
100
200
400
KΩ
0.3
0.6
mA
IDD(OFF1) Supply Current (OFF)
REXT = OPEN
OUT 0 to 15 = OFF
IDD(OFF2)
REXT = 470 Ω
OUT 0 to 15 = OFF
5.5
7.7
IDD(OFF3)
REXT = 250 Ω
OUT 0 to 15 = OFF
10.1
14.1
IDD(ON1)
Supply Current (ON)
IDD(ON2)
REXT = 470 Ω
OUT 0 to 15 = ON
5.5
7.7
REXT = 250 Ω
OUT 0 to 15 = ON
10.1
14.1
Table 8: Switching Characteristics (VDD=5V, T = 25°C, unless otherwise specified.)
Symbol
Parameter
tPLH1
tr
Propagation Delay Time,
CLK-OUTn, /LE = H, /OE = L
Propagation Delay Time,
/LE-OUTn, /OE = L
Propagation Delay Time,
/OE-OUTn, /LE = H
Propagation Delay Time,
CLK-SDO
Propagation Delay Time,
CLK-OUTn, /LE = H, /OE = L
Propagation Delay Time,
/LE-OUTn, /OE = L
Propagation Delay Time,
/OE-OUTn, /LE = H
Propagation Delay Time,
CLK-SDO
Output Rise Time
tf
Output Fall Time
tPLH2
tPLH3
tPLH
tPHL1
tPHL2
tPHL3
tPHL
4/18
Test Conditions
VDD = 5 V
VIH = VDD
VIL = GND
IO = 40mA
REXT = 470 Ω
CL = 13pF
VL = 3 V
RL = 65 Ω
Min.
Typ.
Max.
Unit
200
280
ns
160
250
ns
145
200
ns
15
30
ns
15
30
ns
15
30
ns
45
60
ns
15
300
ns
160
200
ns
15
25
ns
STP16C596
EQUIVALENT CIRCUIT OF INPUTS AND OUTPUTS
Figure 2: /OE Terminal
Figure 3: /LE Terminal
Figure 4: CLK, SDI Terminal
5/18
STP16C596
Figure 5: SDO Terminal
Figure 6: Block Diagram
6/18
STP16C596
Table 9: Truth Table
CLOCK
/LE
/OE
SERIAL-IN
OUT0 .................. OUT7 .................. OUT15
SDO
H
L
Dn
Dn ..... Dn - 7 ..... Dn -15
Dn - 15
L
L
Dn + 1
No Change
Dn - 14
H
L
Dn + 2
Dn - 2 ..... Dn - 5 ..... Dn -13
Dn - 13
X
L
Dn + 3
Dn - 2 ..... Dn - 5 ..... Dn -13
Dn - 13
X
L
Dn + 3
OFF
Dn - 13
Note 1: OUT0 to OUT15 = ON when Dn = H; OUT0 to OUT15 = OFF when Dn = L.
Figure 7: Timing Diagram
Note: The latches circuit holds data when the LE terminal is Low.
When LE terminal is at High level, latch circuit doesn’t hold the data it passes from the input to the output.
When OE terminal is at Low level, output terminals OUT0 to OUT15 respond to the data, either ON or OFF.
When OE terminal is at High level, it switches off all the data on the output terminal.
7/18
STP16C596
Figure 8: Clock, Serial-in, Serial-out
Figure 9: Clock, Serial-in, Latch, Enable, Outputs
8/18
STP16C596
Figure 10: Outputs
TEST CIRCUIT
Figure 11: DC Characteristic
Figure 12: AC Characteristic
9/18
STP16C596
Figure 13: Output Current-R EXT Resistor
10/18
Figure 14: Power Dissipation vs Temperature
Package
STP16C596
Plastic DIP-24 (0.25) MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
A
MIN.
TYP.
MAX.
4.32
A1
0.170
0.38
0.015
A2
3.3
0.130
B
0.41
0.46
0.51
0.016
0.018
0.020
B1
1.40
1.52
1.65
0.055
0.060
0.065
c
0.20
0.25
0.30
0.008
0.010
0.012
D
31.62
31.75
31.88
1.245
1.250
1.255
E
7.62
8.26
0.300
E1
6.35
6.86
0.250
6.60
0.325
0.260
e
2.54
0.100
E1
7.62
0.300
0.270
L
3.18
3.43
0.125
0.135
M
0˚
15˚
0˚
15˚
E
A
L
A2
A1
E1
Stand-off
B
B1
e
e1
c
D
24
13
.015
0,38
Gage Plane
1
12
M
0034965/D
11/18
STP16C596
SO-24 MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
2.35
2.65
0.093
0.104
A1
0.1
0.30
0.004
0.012
B
0.33
0.51
0.013
0.020
C
0.23
0.32
0.009
0.013
D
15.20
15.60
0.598
0.614
E
7.4
7.6
0.291
0.299
e
1.27
0.050
H
10.00
10.65
0.394
0.419
h
0.25
0.75
0.010
0.030
L
0.4
1.27
0.016
0.050
k
0°
8°
0°
8°
ddd
0.100
0.004
0070769C
12/18
STP16C596
TSSOP24 EXPOSED PAD MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
A
1.2
A1
0.15
A2
0.8
b
TYP.
MAX.
0.047
0.004
0.006
0.039
0.041
1.05
0.031
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
7.7
7.9
0.303
D1
2.7
E
6.2
6.4
6.6
E1
4.3
4.4
4.5
E2
1.5
e
1
MIN.
7.8
0.307
0.311
0.244
0.252
0.260
0.169
0.173
0.177
0.106
0.059
0.65
K
0°
L
0.45
0.60
0.0256
8°
0°
0.75
0.018
8°
0.024
0.030
7100778C
13/18
STP16C596
TSSOP24 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
A
MIN.
TYP.
MAX.
1.1
A1
0.05
0.15
A2
0.043
0.002
0.006
0.9
0.035
b
0.19
0.30
0.0075
0.0118
c
0.09
0.20
0.0035
0.0079
D
7.7
7.9
0.303
0.311
E
4.3
4.5
0.169
0.177
e
0.65 BSC
0.0256 BSC
H
6.25
6.5
0.246
0.256
K
0°
8°
0°
8°
L
0.50
0.70
0.020
0.028
A
A2
A1
b
K
e
L
H
c
D
E
PIN 1 IDENTIFICATION
1
7047476B
14/18
STP16C596
Tape & Reel SO-24 MECHANICAL DATA
mm.
inch
DIM.
MIN.
A
TYP
MAX.
MIN.
330
MAX.
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
TYP.
0.504
30.4
0.519
1.197
Ao
10.8
11.0
0.425
0.433
Bo
15.7
15.9
0.618
0.626
Ko
2.9
3.1
0.114
0.122
Po
3.9
4.1
0.153
0.161
P
11.9
12.1
0.468
0.476
15/18
STP16C596
Tape & Reel TSSOP24 MECHANICAL DATA
mm.
inch
DIM.
MIN.
A
MAX.
MIN.
330
13.2
TYP.
MAX.
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
16/18
TYP
0.504
22.4
0.519
0.882
Ao
6.8
7
0.268
0.276
Bo
8.2
8.4
0.323
0.331
Ko
1.7
1.9
0.067
0.075
Po
3.9
4.1
0.153
0.161
P
11.9
12.1
0.468
0.476
STP16C596
Table 10: Revision History
Date
Revision
06-May-2004
03-Aug-2004
4
5
Description of Changes
Table 6 and Table 7 parameters changed.
Figure 14 - pag. 10 is changed.
17/18
STP16C596
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
© 2004 STMicroelectronics - All Rights Reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
18/18