Ordering number : ENN6591 CPH5705 TR : PNP Epitaxial Planar Silicon Transistor SBD : Sohottky Barrier Diode CPH5705 DC / DC Converter Applications Features unit : mm 2156 4 0.15 3 0.6 5 0.2 [CPH5705] 2.9 0.05 0.6 • Composite type with a PNP transistor and a Schottky barrier diode contained in one package facilitating high-density mounting. The CPH5705 consists of two chips which are equivalent to the CPH3109 and the SBS004, respectively. Ultrasmall package facilitates miniaturization in end products. 2.8 • Package Dimensions 1.6 • 1 2 0.4 1 : Cathode 2 : Collector 3 : Base 4 : Emitter 5 : Anode Specifications 0.9 0.7 0.2 0.95 0.4 SANYO : CPH5 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit [TR] Collector-to-Base Voltage VCBO --30 V Collector-to-Emitter Voltage VCEO --30 V Emitter-to-Base Voltage VEBO --5 V IC --3 A --5 A Base Current ICP IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Collector Current Collector Current (Pulse) --600 Mounted on a ceramic board (600mm2✕0.8mm) mA 0.9 W 150 °C --55 to +125 °C VRRM VRSM 15 V 15 V Average Output Current IO 1 A Surge Forward Current 10 A Junction Temperature IFSM Tj --55 to +125 °C Storage Temperature Tstg --55 to +125 °C [SBD] Repetitive Peak Reverse Voltage Non-repetitive Peak Reverse Surge Voltage 50Hz sine wave, 1cycle Marking : PE Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 61500 TS IM TA-2903 No.6591-1/5 CPH5705 Electrical Characteristics at Ta=25°C Parameter Symbol Ratings Conditions min typ Unit max [TR] Collector Cutoff Current ICBO Emitter Cutoff Current IEBO hFE DC Current Gain Gain Bandwidth Product Base-to-Emitter Saturation Voltage VCE=--2V, IC=--0.5A 200 VCE=--2V, IC=--0.5A 380 Cob VCB=--10V, f=1MHz 25 VCE(sat) IC=--1.5A, IB=--30mA IC=--1.5A, IB=--30mA Collector-to-Base Breakdown Voltage VBE(sat) V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-ON Time ton tstg tf Storage Time Fall Time IC=--10µA, IE=0 IC=--1mA, RBE=∞ --0.1 µA --0.1 µA 560 fT Output Capacitance Collector-to-Emitter Saturation Voltage VCB=--12V, IE=0 VEB=--4V, IC=0 MHz pF --155 --230 --0.83 --1.2 mV V --30 IE=--10µA, IC=0 See specified Test Circuit V --30 V --5 V 50 ns See specified Test Circuit 270 ns See specified Test Circuit 25 ns [SBD] Reverse Voltage Forward Voltage Reverse Current VR VF 1 IR=1mA IF=0.5A VF 2 IF=1A VR=6V IR C Interterminal Capacitance Reverse Recovery Time trr Rth j-a Thermal Resistance 15 VR=10V, f=1MHz V 0.30 0.35 0.35 0.40 V V 500 µA 42 IF=IR=100mA, See specified Test Circuit Mounted on a ceramic board (600mm2✕0.8mm) pF 15 ns °C/W 110 Electrical Connection A E C B (Top view) C Switching Time Test Circuit [SBD] IB1 OUTPUT INPUT 10µs 50Ω RB 100Ω RL VR 50Ω 100mA Duty≤10% IB2 + + 220µF 470µF –5V 10Ω 100mA PW=20µs D.C.≤1% 10mA [TR] trr Test Circuit trr VBE=5V VCC= –5V –20IB1= 20IB2= IC= –1.5A No.6591-2/5 CPH5705 IC -- VCE --4.0 --10mA 0 --2 [TR] VCE= --2V --3.5 Collector Current, IC -- A --8mA A --1.6 IC -- VBE [TR] mA --6mA --1.2 --4mA --0.8 --2mA --3.0 --2.5 --2.0 Ta=75 °C 25°C --25°C --30mA --40mA --50m Collector Current, IC -- A --2.0 --1.5 --1.0 --0.4 --0.5 IB=0 0 0 --200 --400 --600 --800 Collector-to-Emitter Voltage, VCE -- mV hFE -- IC 1000 Ta=75°C 3 25°C --25°C 2 3 2 2 3 5 7 --1.0 2 Collector Current, IC -- A Cob -- VCB [TR] f=1MHz 100 7 5 3 10 --1.0 2 3 5 7 --10 2 3 Collector-to-Base Voltage, VCB -- V VCE(sat) -- IC --10 7 5 5 3 2 100 7 5 3 2 2 3 5 7 --100 2 3 5 7 --1000 2 3 IT02119 VCE(sat) -- IC --1.0 7 5 5 [TR] IC / IB=20 3 2 --0.1 7 5 C 75° Ta= 5°C °C 2 5 2 -- 3 2 --1.0 7 5 3 2 C 75° Ta= 5°C °C 2 --25 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 3 2 3 5 7 --10 IT02122 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A VBE(sat) -- IC [TR] 3 2 3 2 2 IT02120 --10 IC / IB=50 --0.1 7 5 3 2 --0.001 --0.01 5 7 --10 IT02121 [TR] IC / IB=50 7 Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V [TR] --0.01 7 5 2 --0.01 --0.01 --1.2 IT02117 Collector Current, IC -- mA Collector -to-Emitter Saturation Voltage, VCE(sat) -- V Output Capacitance, Cob -- pF 2 --1.0 VCE= --10V 10 --10 5 7 --10 IT02118 3 --0.8 7 5 5 7 --0.1 --0.6 f T -- IC 1000 7 3 --0.4 [TR] 100 2 --0.2 Base-to-Emitter Voltage, VBE -- V Gain-Bandwidth Product, f T -- MHz 5 10 --0.01 0 IT02116 VCE= --2V 7 DC Current Gain, hFE 0 --1000 5 3 2 --1.0 Ta= --25°C 7 25°C 75°C 5 3 2 --0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 7 --10 IT02123 No.6591-3/5 CPH5705 ASO s 10 m DC s 10 0m op s era tio 3 2 n --0.1 7 5 3 2 Ta=25°C Single pulse Mounted on ceramic board (600mm2✕0.8mm) --0.01 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 am bo ar 0.4 d (6 00 m 0.3 m2 ✕ 0. 8m 0.2 m 0 20 40 60 Reverse Current, IR -- mA °C 75 50 C 25° 80 100 120 140 160 Ambient Tamperature, Ta -- °C IT02125 IR -- VR [SBD] Ta=125°C 10 7 5 3 2 100°C 75°C 1.0 7 5 3 2 50°C 25°C 0.1 7 5 3 2 0.01 0.01 0 0.1 0.2 0.3 0.4 0.5 Forward Voltage, VF -- V Average Forward Power Dissipation, PF(AV) -- W ac ic 0.5 100 7 5 3 2 °C C 5° 12 Ta = Forward Current, IF -- A 3 2 on er [SBD] C 0.1 7 5 ed 0.6 5 7 --100 IT02124 0° 10 nt 0.7 0 3 3 2 3 2 ou ) IF -- VF 1.0 7 5 M 0.8 0.1 Collector-to-Emitter Voltage, VCE -- V 10 7 5 [TR] 0.9 s --1.0 7 5 PC -- Ta 1.0 Collector Dissipation, PC -- W 1m s 3 2 0µ 50 Collector Current, IC -- A ICP= --5A IC= --3A [TR] 0µ 10 --10 7 5 IT02126 PF(AV) -- IO 0.8 0 5 10 Reverse Voltage, VR -- V 15 IT02127 [SBD] qRectangular wave θ=60° wRectangular wave θ=120° eRectangular wave θ=180° rSine wave θ=180° 0.7 0.6 w e q 0.5 r Rectangular wave 0.4 θ 0.3 360° 0.2 Sine wave 0.1 180° 360° 0 0 0.2 0.4 0.6 0.8 1.0 Average Rectified Current, IO -- A 1.2 1.4 IT02128 No.6591-4/5 CPH5705 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2000. Specifications and information herein are subject to change without notice. PS No.6591-5/5