TI CDC340DW

CDC340
1-LINE TO 8-LINE CLOCK DRIVER
SCAS332B – DECEMBER 1992 – REVISED MAY 1997
D
D
D
D
D
D
D
DW PACKAGE
(TOP VIEW)
Low Output Skew, Low Pulse Skew for
Clock-Distribution and Clock-Generation
Applications
TTL-Compatible Inputs and Outputs
Distributes One Clock Input to Eight
Outputs
Distributed VCC and Ground Pins Reduce
Switching Noise
High-Drive Outputs (– 48-mA IOH,
48-mA IOL)
State-of-the-Art EPIC-ΙΙB  BiCMOS Design
Significantly Reduces Power Dissipation
Package Options Include Plastic
Small-Outline (DW) and Shrink
VCC
1G
2G
A
P0
P1
VCC
2Y4
2Y3
GND
1
20
2
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
10
11
VCC
1Y1
1Y2
GND
1Y3
1Y4
GND
2Y1
2Y2
GND
description
The CDC340 is a high-performance clock-driver circuit that distributes one (A) input signal to eight (Y) outputs
with minimum skew for clock distribution. Through the use of the control pins (1G and 2G), the outputs can be
placed in a high state regardless of the A input.
The propagation delays are adjusted at the factory using the P0 and P1 pins. These pins are not intended for
customer use and should be strapped to GND.
The CDC340 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE
INPUTS
1G
2G
X
L
L
OUTPUTS
A
1Y1 – 1Y4
2Y1 – 2Y4
X
L
H
H
L
H
H
H
H
H
H
L
H
L
H
L
H
H
H
H
L
L
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC-ΙΙB is a trademark of Texas Instruments Incorporated.
Copyright  1997, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
CDC340
1-LINE TO 8-LINE CLOCK DRIVER
SCAS332B – DECEMBER 1992 – REVISED MAY 1997
logic symbol†
1G
2G
2
3
G1
G2
1
1
A
4
1
1
2
2
2
2
19
18
16
15
13
12
9
8
1Y1
1Y2
1Y3
1Y4
2Y1
2Y2
2Y3
2Y4
† This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
logic diagram (positive logic)
1G
2G
2
19
3
18
16
15
A
1Y2
1Y3
1Y4
4
13
12
9
8
2
1Y1
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
2Y1
2Y2
2Y3
2Y4
CDC340
1-LINE TO 8-LINE CLOCK DRIVER
SCAS332B – DECEMBER 1992 – REVISED MAY 1997
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
Voltage range applied to any output in the high state or power-off state,
VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC + 0.5 V
Current into any output in the low state, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA
Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 mA
Maximum power dissipation at TA = 55°C (in still air) (see Note 2): DW package . . . . . . . . . . . . . . . . . . 1.6 W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
2. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils.
For more information, refer to the Package Thermal Considerations Application Note in the ABT Advanced BiCMOS Technology
Data Book, literature number SCBD002.
recommended operating conditions (see Note 3)
MIN
MAX
UNIT
4.75
5.25
V
VCC
VIH
Supply voltage
VIL
VI
Low-level input voltage
IOH
IOL
High-level output current
VCC
– 48
mA
Low-level output current
48
mA
fclock
l k
Input clock frequency
High-level input voltage
2
V
0.8
Input voltage
0
One output back loaded
80
Both output banks loaded
40
TA
Operating free-air temperature
NOTE 3: Unused inputs must be held high or low to prevent them from floating.
0
70
V
V
MHz
°C
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
VIK
TEST CONDITIONS
VCC = 4.75 V,
VCC = 4.75 V,
II = –18 mA
IOH = – 3 mA
VOH
VCC = 5 V,
VCC = 4.75 V,
IOH = – 3 mA
IOH = – 48 mA
VOL
II
IO§
VCC = 4.75 V,
VCC = 5.25 V,
IOL = 48 mA
VI = VCC or GND
VCC = 5.25 V,
VO = 2.5 V
VCC = 5.25 V,,
VI = VCC or GND
IO = 0,,
ICC
MIN
TA = 25°C
TYP‡
MAX
–1.2
2.5
2.5
3
3
2
2
MAX
UNIT
–1.2
V
V
0.5
±1
– 50
– 100
– 200
– 50
±1
µA
mA
2
3.5
Outputs low
24
33
• DALLAS, TEXAS 75265
V
– 200
Outputs high
Ci
VI = 2.5 V or 0.5 V
3
‡ All typical values are at VCC = 5 V.
§ No more than one output should be tested at a time, and the duration of the test should not exceed one second.
POST OFFICE BOX 655303
MIN
mA
pF
3
CDC340
1-LINE TO 8-LINE CLOCK DRIVER
SCAS332B – DECEMBER 1992 – REVISED MAY 1997
switching characteristics, CL = 50 pF (see Figure 1 and Figure 2)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
A
Y
G
Y
A
Y
VCC = 5 V,
TA = 25°C
MIN
TYP
MAX
VCC = 4.75 V to 5.25 V,
TA = 0°C to 70°C
MIN
MAX
tPLH
tPHL
Propagation delay time, low-to-high level
tPLH
tPHL
Propagation delay time, low-to-high level
tsk(o)
tsk(p)
Skew time, output
tsk(pr)
tr
Skew time, process
Rise time
A
Y
1.5
ns
tf
Fall time
A
Y
1.5
ns
Propagation delay time, high-to-low level
Propagation delay time, high-to-low level
Skew time, pulse
3.4
4.5
3
4.8
3.2
4.3
2.8
4.7
2
3.8
2
4
2
3.8
2
4
UNIT
0.3
0.5
0.6
0.6
0.8
0.9
1.1
1.1
ns
ns
ns
tpd performance information relative to VCC and temperature variation (see Note 4)
∆ change
PARAMETER
∆tPLH(TA)†
∆tPHL(TA)†
Temperature drift of tPLH from 0°C to 70°C
Temperature drift of tPHL from 0°C to 70°C
– 58 ps / 10°C
∆tPLH(VCC)‡
∆tPHL(VCC)‡
VCC drift of tPLH from 4.75 V to 5.25 V
VCC drift of tPHL from 4.75 V to 5.25 V
43 ps / 100 mV
– 53 ps / 10°C
– 33 ps / 100 mV
† Virtually independent of VCC
‡ Virtually independent of temperature
NOTE 4: The data extracted is from a wide range of characterization material.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
CDC340
1-LINE TO 8-LINE CLOCK DRIVER
SCAS332B – DECEMBER 1992 – REVISED MAY 1997
PARAMETER MEASUREMENT INFORMATION
From Output
Under Test
CL = 50 pF
(see Note A)
500 Ω
LOAD CIRCUIT
3V
Input
(see Note B)
1.5 V
1.5 V
0V
tPHL
tPLH
Output
1.5 V
0.8 V
2V
tr
1.5 V
0.8 V
VOH
VOL
tf
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
NOTES: A. CL includes probe and jig capacitance.
B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf ≤ 2.5 ns.
Figure 1. Load Circuit and Voltage Waveforms
A
1G
2G
1Yn
tPLH1
tPHL1
tPLH2
tPHL2
2Yn
NOTES: A. Output skew, tsk(o), is calculated as the greater of:
– The difference between the fastest and slowest of tPLHn (n = 1, 2)
– The difference between the fastest and slowest of tPHLn (n = 1, 2)
B. Pulse skew, tsk(p), is calculated as the greater of | tPLHn – tPHLn | (n = 1, 2).
C. Process skew, tsk(pr), is calculated as the greater of:
– The difference between the fastest and slowest of tPLHn (n = 1, 2) across multiple devices under identical operating conditions
– The difference between the fastest and slowest of tPHLn (n = 1, 2) across multiple devices under identical operating conditions
Figure 2. Waveforms for Calculation of tsk(o), tsk(p), tsk(pr)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
CDC340
1-LINE TO 8-LINE CLOCK DRIVER
SCAS332B – DECEMBER 1992 – REVISED MAY 1997
MECHANICAL INFORMATION
DW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
16 PIN SHOWN
PINS **
0.050 (1,27)
16
20
24
28
A MAX
0.410
(10,41)
0.510
(12,95)
0.610
(15,49)
0.710
(18,03)
A MIN
0.400
(10,16)
0.500
(12,70)
0.600
(15,24)
0.700
(17,78)
DIM
0.020 (0,51)
0.014 (0,35)
16
0.010 (0,25) M
9
0.419 (10,65)
0.400 (10,15)
0.299 (7,59)
0.293 (7,45)
0.010 (0,25) NOM
Gage Plane
0.010 (0,25)
1
8
0°– 8°
A
0.050 (1,27)
0.016 (0,40)
Seating Plane
0.104 (2,65) MAX
0.012 (0,30)
0.004 (0,10)
0.004 (0,10)
4040000 / B 03/95
NOTES: A.
B.
C.
D.
6
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0.006 (0,15).
Falls within JEDEC MS-013
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright  1998, Texas Instruments Incorporated