EFC4615R Ordering number : ENA1629A SANYO Semiconductors DATA SHEET N-Channel Silicon MOSFET EFC4615R General-Purpose Switching Device Applications Features • • • • • 2.5V drive Best suited for LiB charging and discharging switch Common-drain type Protection diode in Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Source-to-Source Voltage Conditions Ratings VSSS VGSS Gate-to-Source Voltage Source Current (DC) IS ISP Source Current (Pulse) Total Dissipation Channel Temperature PT Tch Storage Temperature Tstg Unit 24 V 6 A PW≤10μs, duty cycle≤1% 60 A When mounted on ceramic substrate (5000mm2×0.8mm) 1.6 W 150 °C --55 to +150 °C Package Dimensions Product & Package Information unit : mm (typ) 7067-001 • Package : EFCP • JEITA, JEDEC :• Minimum Packing Quantity : 5,000 pcs./reel EFC4615R-TR 1.46 Taping Type : TR 3 Marking 1.46 4 V ±12 FQ TR 2 Electrical Connection Rg 0.65 0.65 LOT No. 1 0.37 0.15 0.22 1 2 1 2 4 3 1 : Source1 2 : Gate1 3 : Gate2 4 : Source2 0.3 Rg 3 SANYO : EFCP1515-4CC-037 Rg=200Ω 4 http://www.sanyosemi.com/en/network/ 91212 TKIM/62310PF TKIM TC-00002379 No. A1629-1/7 EFC4615R Electrical Characteristics at Ta=25°C Parameter Symbol Source-to-Source Breakdown Voltage V(BR)SSS Zero-Gate Voltage Source Current ISSS Gate-to-Source Leakage Current IGSS Cutoff Voltage Forward Transfer Admittance Static Source-to-Source On-State Resistance Ratings Conditions min typ Unit max 24 Test Circuit 1 V IS=1mA, VGS=0V VSS=20V, VGS=0V Test Circuit 1 VGS(off) VGS=±8V, VSS=0V VSS=10V, IS=1mA Test Circuit 3 | yfs | VSS=10V, IS=3A Test Circuit 4 RSS(on)1 IS=3A, VGS=4.5V IS=3A, VGS=4.0V Test Circuit 5 19 27 31 mΩ RSS(on)2 Test Circuit 5 21 28 33 mΩ RSS(on)3 IS=3A, VGS=3.1V Test Circuit 5 24 33 44 mΩ RSS(on)4 IS=3A, VGS=2.5V Test Circuit 5 28 39 52 mΩ Test Circuit 2 Turn-ON Delay Time td(on) Rise Time tr Turn-OFF Delay Time td(off) Fall Time tf Total Gate Charge Qg VSS=10V, VGS=4.5V, IS=6A Forward Source-to-Source Voltage VF(S-S) IS=6A, VGS=0V See specified Test Circuit. 0.5 1 μA ±10 μA 1.3 5.4 Test Circuit 7 13 ns 235 ns 335 ns 360 ns 8.8 nC 1 Test Circuit 6 V S 1.2 V Ordering Information Device EFC4615R-TR Package Shipping memo EFCP 5,000pcs./reel Pb Free and Halogen Free Test circuits are example of measuring FET1 side Test Circuit 1 VSSS / ISSS Test Circuit 2 IGSS(+) / (--) S2 S2 G2 G2 G1 G1 S1 S1 IT11565 Test Circuit 3 VGS(off) IT11566 Test Circuit 4 | yfs | S2 S2 G2 G2 10V 1mA G1 G1 S1 S1 IT11567 IT11568 * Note: Connect the mesurement terminal reversely if you want to measure the FET2 side. No. A1629-2/7 EFC4615R Test Circuit 5 RSS(on) Test Circuit 6 VF(S-S) S2 S2 4.5V G2 G2 G1 G1 S1 S1 IT11569 IT11570 Test Circuit 8 Qg Test Circuit 7 td(on), tr, td(off), tf VDD=10V S2 IS=3A RL=3.33Ω V S2 OUT VIN G2 G2 G1 PW=10μs D.C.≤1% G1 S1 S1 IT11571 IS -- VGS 5.0 Static Source-to-Source On-State Resistance, RSS(on) -- mΩ VSS=10V 4.5 3.5 3.0 2.5 2.0 25°C 1.0 --25°C Ta= 75°C 0.5 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Gate-to-Source Voltage, VGS -- V RSS(on) -- Ta Static Source-to-Source On-State Resistance, RSS(on) -- mΩ 70 =4. VGS 3A , I S= 2.5V =3A = V, I S VGS =3.1 S VG A , I S=3 =4.5V S VG 30 20 10 0 --60 --40 --20 0 20 40 60 80 50 40 30 20 0 2 4 100 Ambient Temperature, Ta -- °C 120 140 160 IT15255 6 8 10 Gate-to-Source Voltage, VGS -- V IT15253 3A I = 0V, S 40 60 IT15254 | yfs | -- IS 10 60 50 Ta=25°C IS=3A 70 10 1.6 Forward Transfer Admittance, | yfs | -- S Source Current, IS -- A 4.0 1.5 IT15409 * Note: Connect the mesurement terminal reversely if you want to measure the FET2 side. RSS(on) -- VGS 80 VSS=10V 7 5 Ta= 3 °C --25 C 75° 25 2 °C 1.0 7 0.1 2 3 5 7 1.0 2 Source Current, IS -- A 3 5 7 10 IT15256 No. A1629-3/7 EFC4615R IS -- VF(S-S) Switching Time, SW Time -- ns 0.1 7 5 3 2 0.01 7 5 3 2 0 0.2 0.4 0.6 0.8 1.0 VGS -- Qg td(off) 3 tf 2 100 tr 7 5 3 2 td(on) 7 0.01 1.2 3.0 2.5 2.0 1.5 1.0 0.5 1 2 3 4 5 6 7 8 Total Gate Charge, Qg -- nC PT -- Ta 1.8 5 7 0.1 9 10 IT15260 2 3 5 7 1.0 2 3 5 7 10 100 7 5 3 2 10 7 5 3 2 ISP=60A (PW≤10μs) 10 0μ 1m s s IS=6A 10 ms 10 DC 1.0 7 5 3 2 0.1 7 5 3 2 IT15258 ASO 2 3.5 0 3 Source Current, IS -- A VSS=10V IS=6A 4.0 2 IT15257 Source Current, IS -- A Gate-to-Source Voltage, VGS -- V 4.5 0m s op era Operation in this area is limited by RSS(on). tio n Ta=25°C Single pulse When mounted on ceramic substrate (5000mm2×0.8mm) 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Source-to-Source Voltage, VSS -- V 2 3 5 IT15534 When mounted on ceramic substrate (5000mm2×0.8mm) 1.6 Total Dissipation, PT -- W 5 10 Forward Source-to-Source Voltage, VF(S-S) -- V 0 VSS=10V VGS=4.5V 7 1.0 7 5 3 2 0.001 SW Time -- IS 1000 VGS=0V Ta=7 5°C 25°C --25°C Source Current, IS -- A 10 7 5 3 2 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT15535 No. A1629-4/7 EFC4615R Taping Specification EFC4615R-TR No. A1629-5/7 EFC4615R Outline Drawing EFC4615R-TR Land Pattern Example Mass (g) Unit 0.0013 mm * For reference Unit: mm 0.65 0.65 0.3 No. A1629-6/7 EFC4615R Note on usage : Since the EFC4615R is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of September, 2012. Specifications and information herein are subject to change without notice. PS No. A1629-7/7