STI260N6F6 STP260N6F6 N-channel 60 V, 0.0024 Ω, 120 A STripFET™ VI DeepGATE™ Power MOSFET in TO-220 and I²PAK packages Features Order codes STI260N6F6 STP260N6F6 VDSS RDS(on) max ID TAB TAB 60 V < 0.003 Ω ■ Low gate charge ■ Very low on-resistance ■ High avalanche ruggedness 120 A 3 3 12 1 2 TO-220 I²PAK Application ■ Switching applications Description Figure 1. Internal schematic diagram These devices are N-channel Power MOSFETs developed using the 6th generation of STripFET™ DeepGATE™ technology, with a new gate structure. The resulting Power MOSFETs exhibits the lowest RDS(on) in all packages. $4!" ' 3 !-V Table 1. Device summary Order codes Marking Package STI260N6F6 I²PAK 260N6F6 STP260N6F6 January 2012 Packaging Tube TO-220 Doc ID 17467 Rev 5 1/14 www.st.com 14 Contents STI260N6F6, STP260N6F6 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 .............................................. 8 Doc ID 17467 Rev 5 STI260N6F6, STP260N6F6 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VDS Drain-source voltage 60 V VGS Gate-source voltage ± 20 V ID Drain current (continuous) at TC = 25 °C 120 A ID Drain current (continuous) at TC = 100 °C 120 A Drain current (pulsed) 480 A Total dissipation at TC = 25 °C 300 W 2 W/°C - 55 to 175 °C Value Unit Thermal resistance junction-case max 0.5 °C/W Rthj-a Thermal resistance junction-ambient max 62.5 °C/W Tl Maximum lead temperature for soldering purpose 300 °C IDM (1) PTOT Derating factor Tstg Tj Storage temperature Operating junction temperature 1. Current limited by package. Table 3. Symbol Rthj-case Thermal data Parameter Doc ID 17467 Rev 5 3/14 Electrical characteristics 2 STI260N6F6, STP260N6F6 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 4. Symbol V(BR)DSS Parameter Test conditions Drain-source breakdown voltage (VGS = 0) ID = 250 µA Zero gate voltage Drain current (VGS = 0) IGSS Gate-body leakage current (VDS = 0) VGS = ± 20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source on-resistance VGS = 10 V, ID = 60 A Symbol Parameter Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Qg Total gate charge Qgs Gate-source charge Qgd Gate-drain charge Symbol Typ. Max. 60 Unit V 1 µA 100 µA ± 100 nA 4 V 2.4 3 mΩ Typ. Max. VDS = 60 V, TC=125 °C 2 Dynamic Ciss Table 6. Min. VDS = 60 V IDSS Table 5. 4/14 On/off states Test conditions Min. 11400 VDS = 25 V, f = 1 MHz, VGS = 0 VDD = 30 V, ID = 120 A, VGS = 10 V (see Figure 14) - - 850 Unit pF - pF 368 pF 183 nC 53 - 41 nC nC Switching times Parameter td(on) tr Turn-on delay time Rise time td(off) tf Turn-off-delay time Fall time Test conditions VDD = 30 V, ID = 60 A RG = 4.7 Ω VGS = 10 V (see Figure 13) Doc ID 17467 Rev 5 Min. Typ. Max. Unit - 31.4 165 - ns ns - 144.4 62.6 - ns ns STI260N6F6, STP260N6F6 Table 7. Symbol Electrical characteristics Source drain diode Parameter Test conditions Min. Typ. Max Unit Source-drain current - 120 A ISDM (1) Source-drain current (pulsed) - 480 A VSD (2) Forward on voltage ISD = 120 A, VGS = 0 - 1.1 V Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 120 A, VDD = 48 V di/dt = 100 A/µs, Tj = 150 °C (see Figure 15) - ISD trr Qrr IRRM 55.6 116 3.8 ns nC A 1. Current limited by package. 2. Pulsed: pulse duration = 300 µs, duty cycle 1.5% Doc ID 17467 Rev 5 5/14 Electrical characteristics STI260N6F6, STP260N6F6 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Thermal impedance AM09068v1 ID (A) δ=0.5 Tj=175°C Tc=25°C Single pulse re ) s a (on thi RDS n i x on ma y ati er d b p e O it Lim 100 280tok K s ai 0.2 100µs 0.1 0.05 1ms 10 -1 10 0.02 10ms Zth=k Rthj-c δ=tp/τ 0.01 1 Single pulse tp τ -2 0.1 0.1 Figure 4. 10 1 VDS(V) Output characteristics 10 -5 10 Figure 5. -4 10 -2 -3 -1 10 10 tp (s) 10 Transfer characteristics AM09069v1 AM09070v1 ID(A) ID (A) 400 VDS=2V 400 VGS=10V 350 350 6V 300 300 250 250 5V 200 200 150 150 100 100 50 50 0 0 Figure 6. 1 2 3 Normalized BVDSS vs. temperature AM09071v1 BVDSS 0 0 VDS(V) (norm) ID=1mA 1.1 Figure 7. 1 2 4 3 5 VGS(V) Static drain-source on resistance AM09072v1 RDS(on) (Ω) 4.0 VGS=10V 3.5 1.0 3.0 2.5 0.9 2.0 0.8 1.5 1.0 0.7 0.5 0.6 -75 6/14 -25 25 75 125 175 TJ(°C) 0.0 0 Doc ID 17467 Rev 5 20 40 60 80 100 120 ID(A) STI260N6F6, STP260N6F6 Figure 8. Electrical characteristics Gate charge vs. gate-source voltage Figure 9. AM09073v1 VGS (V) Capacitance variations AM09074v1 C (pF) f=1MHz VDD=30V ID=120A 12 10 10000 Ciss 1000 Coss 8 6 4 Crss 2 0 0 100 50 150 200 100 Qg(nC) Figure 10. Normalized gate threshold voltage vs. temperature AM09075v1 VGS(th) (norm) 0.1 1 Figure 11. Normalized on resistance vs. temperature AM09076v1 RDS(on) (norm) ID=60A VGS=10V ID=250µA 1.2 VDS(V) 10 2.0 1.0 1.5 0.8 0.6 1.0 0.4 0.5 0.2 -75 25 -25 75 175 TJ(°C) 125 0 -75 -25 25 75 125 175 TJ(°C) Figure 12. Source-drain diode forward characteristics AM09077v1 VSD (V) TJ=-55°C 1.0 0.9 TJ=25°C 0.8 0.7 TJ=150°C 0.6 0.5 0.4 0 20 40 60 80 100 120 ISD(A) Doc ID 17467 Rev 5 7/14 Test circuits 3 STI260N6F6, STP260N6F6 Test circuits Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 μF 2200 RL μF VGS IG=CONST VDD 100Ω Vi=20V=VGMAX VD RG 2200 μF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 AM01469v1 Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100μH S 3.3 μF B 25 Ω 1000 μF D VDD 2200 μF 3.3 μF VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 17. Unclamped inductive waveform AM01471v1 Figure 18. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 8/14 0 Doc ID 17467 Rev 5 10% AM01473v1 STI260N6F6, STP260N6F6 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. Doc ID 17467 Rev 5 9/14 Package mechanical data Table 8. STI260N6F6, STP260N6F6 I²PAK (TO-262) mechanical data mm. DIM. min. typ max. A 4.40 4.60 A1 2.40 2.72 b 0.61 0.88 b1 1.14 1.70 c 0.49 0.70 c2 1.23 1.32 D 8.95 9.35 e 2.40 2.70 e1 4.95 5.15 E 10 10.40 L 13 14 L1 3.50 3.93 L2 1.27 1.40 Figure 19. I²PAK (TO-262) drawing 0004982_Rev_H 10/14 Doc ID 17467 Rev 5 STI260N6F6, STP260N6F6 Table 9. Package mechanical data TO-220 type A mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 Doc ID 17467 Rev 5 11/14 Package mechanical data STI260N6F6, STP260N6F6 Figure 20. TO-220 type A drawing 0015988_typeA_Rev_S 12/14 Doc ID 17467 Rev 5 STI260N6F6, STP260N6F6 5 Revision history Revision history 07-Nov Table 10. Document revision history Date Revision Changes 07-May-2010 1 First release. 18-Apr-2011 2 Document status promoted from preliminary data to datasheet. 27-Apr-2011 3 Device summary has been updated. 05-Oct-2011 4 Table 2: Absolute maximum ratings has been updated. Minor text changes. 13-Jan-2012 5 Updated Table 2: Absolute maximum ratings. Doc ID 17467 Rev 5 13/14 STI260N6F6, STP260N6F6 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14 Doc ID 17467 Rev 5