2SK4125 Ordering number : ENA0747B SANYO Semiconductors DATA SHEET N-Channel Silicon MOSFET 2SK4125 General-Purpose Switching Device Applications Features • • • ON-resistance RDS(on)=0.47Ω (typ.) Input capacitance Ciss=1200pF (typ.) 10V drive Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSS VGSS Gate-to-Source Voltage Drain Current (DC) ID IDP Drain Current (Pulse) Unit 600 PW≤10μs, duty cycle≤1% V ±30 V 17 A 52 A 2.5 W Allowable Power Dissipation PD 170 W Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Avalanche Energy (Single Pulse) *2 EAS IAV 78.8 mJ Avalanche Current *3 Tc=25°C (SANYO’s ideal heat dissipation condition)*1 17 A *1 SANYO’s condition is radiation from backside. The method is applying silicone grease to the backside of the device and attaching the device to water-cooled radiator made of aluminium. *2 VDD=50V, L=500μH, IAV=17A (Fig.1) *3 L≤500μH, single pulse Package Dimensions Product & Package Information unit : mm (typ) 7539-002 • Package : TO-3P-3L • JEITA, JEDEC : SC-65, TO-247, SOT-199 • Minimum Packing Quantity : 30 pcs./magazine 2SK4125-1E 4.8 15.6 5.0 1.5 Electrical Connection 13.6 K4125 16.76 10.0 19.9 2 LOT No. 3.5 18.4 Marking 7.0 3.2 1 20.0 2.0 3.0 1.0 2 5.45 3 3 1.4 1 0.6 1 : Gate 2 : Drain 3 : Source 5.45 SANYO : TO-3P-3L http://semicon.sanyo.com/en/network 62012 TKIM/D0507 TIIM TC-00001053/51607QB TIIM TC-00000701 No. A0747-1/7 2SK4125 Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage V(BR)DSS IDSS ID=10mA, VGS=0V VDS=480V, VGS=0V VGS=±30V, VDS=0V Forward Transfer Admittance IGSS VGS(off) | yfs | Static Drain-to-Source On-State Resistance RDS(on) ID=7A, VGS=10V Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Turn-ON Delay Time td(on) Rise Time tr Turn-OFF Delay Time td(off) Fall Time Total Gate Charge tf Qg Gate-to-Source Charge Qgs Gate-to-Drain “Miller” Charge Qgd Diode Forward Voltage VSD Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Ratings Conditions min Unit max 600 VDS=10V, ID=1mA 3 VDS=10V, ID=8.5A 4.5 V 100 μA ±100 nA 5 V 9 S 0.47 0.61 Ω 1200 pF 220 pF 50 pF 26.5 ns 82 ns 145 ns VDS=30V, f=1MHz See Fig.2 VDS=200V, VGS=10V, ID=17A 52 ns 46 nC 8.3 nC 26.7 IS=17A, VGS=0V Fig.1 Avalanche Resistance Test Circuit 1.3 V Fig.2 Switching Time Test Circuit 10V 0V L VIN VDD=200V ID=8.5A RL=23.5Ω VIN D PW=10μs D.C.≤0.5% 2SK4125 VDD 50Ω nC 1.0 ≥50Ω RG 10V 0V typ VOUT G 2SK4125 P.G RGS=50Ω S Ordering Information Device 2SK4125-1E Package Shipping memo TO-3P-3L 30pcs./magazine Pb Free ID -- VDS 35 VDS=20V 10V 30 Tc= --25°C 35 8V 15V Drain Current, ID -- A Drain Current, ID -- A ID -- VGS 40 Tc=25°C 25 20 15 10 6V 5 30 25°C 25 75°C 20 15 10 5 VGS=5V 0 0 0 5 10 15 20 Drain-to-Source Voltage, VDS -- V 25 30 IT11753 0 2 4 6 8 10 12 14 16 Gate-to-Source Voltage, VGS -- V 18 20 IT11754 No. A0747-2/7 2SK4125 RDS(on) -- VGS 2.0 1.6 1.4 1.2 1.0 Tc=75°C 25°C 0.4 --25°C 0.2 3 5 7 9 11 13 5 --25 2 1.0 7 2 3 5 7 1.0 2 3 5 7 10 2 Drain Current, ID -- A 5 75 100 125 150 IT11756 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 0.01 0.2 5 0.4 0.6 0.8 1.0 1.2 Diode Forward Voltage, VSD -- V 1.4 IT11758 Ciss, Coss, Crss -- VDS 10000 7 5 VDD=200V VGS=10V 7 50 VGS=0V IT11757 SW Time -- ID 1000 3 25 IS -- VSD 3 2 5 3 0.1 0 3 2 °C -25 =c °C T 75 3 0.2 5 °C 25 7 0.4 Case Temperature, Tc -- °C Source Current, IS -- A Forward Transfer Admittance, | yfs | -- S 10 =1 S , VG A =7 ID 0.6 0 --50 15 VDS=10V 2 0V 0.8 IT11755 | yfs | -- ID 3 1.0 --25°C 0.6 1.2 Tc=7 5°C 25°C 0.8 Gate-to-Source Voltage, VGS -- V f=1MHz 3 3 Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns Static Drain-to-Source On-State Resistance, RDS(on) -- Ω Static Drain-to-Source On-State Resistance, RDS(on) -- Ω 1.8 0 RDS(on) -- Tc 1.4 ID=7A td (off) 2 100 7 tf tr 5 td(on) 3 2 Ciss 1000 7 5 Coss 3 2 100 7 5 Crss 3 2 2 10 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Drain Current, ID -- A 100 7 5 3 2 Drain Current, ID -- A 8 7 6 5 4 3 2 1 0 0 10 20 30 Total Gate Charge, Qg -- nC 0 5 40 50 IT12416 10 15 20 25 30 35 40 45 Drain-to-Source Voltage, VDS -- V VDS=200V ID=17A 9 Gate-to-Source Voltage, VGS -- V 5 IT11759 VGS -- Qg 10 3 10 ASO IDP=52A(PW≤10μs) 0.1 7 5 3 2 10 μs 0μ s s 1 10 0ms 0m DC s op era tio n 10 7 5 3 2 1.0 7 5 3 2 10 1m ID=17A 50 IT11760 Operation in this area is limited by RDS(on). Tc=25°C Single pulse 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 Drain-to-Source Voltage, VDS -- V 2 3 5 71000 IT16834 No. A0747-3/7 2SK4125 PD -- Ta 2.5 2.0 1.5 1.0 0.5 180 170 160 140 120 100 80 60 40 20 0 0 0 20 40 60 80 100 120 140 Ambient Temperature, Ta -- °C 160 IT12240 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT12241 EAS -- Ta 120 Avalanche Energy derating factor -- % PD -- Tc 200 Allowable Power Dissipation, PD -- W Allowable Power Dissipation, PD -- W 3.0 100 80 60 40 20 0 0 25 50 75 100 125 Ambient Temperature, Ta -- °C 150 175 IT10478 No. A0747-4/7 2SK4125 Magazine Specification 2SK4125-1E No. A0747-5/7 2SK4125 Outline Drawing 2SK4125-1E Mass (g) Unit 1.8 mm * For reference No. A0747-6/7 2SK4125 Note on usage : Since the 2SK4125 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No. A0747-7/7