Advanced Technical Information = 300 V VMM 300-03F VDSS ID25 = 290 A RDS(on) typ. = 7.4 mW 3 Dual Power HiPerFETTM Module 8 9 Phaseleg Configuration High dv/dt, Low trr, HDMOSTM Family 3 1 2 1 11 10 Conditions VDSS TJ = 25°C to 150°C 300 V VDGR TJ = 25°C to 150°C; RGS = 10 kW 300 V VGS Continuous ±20 V VGSM Transient ±30 V Maximum Ratings Features ● ● ID25 ID80 TC = 25°C TC = 80°C IDM TC = 25°C; tp = 10 µs PD TC = 25°C 290 220 A A 1160 A ● ● ● 1500 W -40 ...+150 °C TJM 150 °C Tstg -40 ... +125 °C 3000 3600 V~ TJ 50/60 Hz IISOL £ 1 mA t = 1 min t=1s Md Mounting torque (M6) Terminal connection torque (M5) Weight typical including screws ● ● ● 2.25-2.75/20-25 Nm/lb.in. 2.5-3.7/22-33 Nm/lb.in. 250 ● Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. VDSS VGS = 0 V, ID = 12 mA 300 VGS(th) VDS = 20 V, ID = 30 mA 2 IGSS VGS = ±20 V DC, VDS = 0 IDSS VDS = VDSS VGS = 0 V RDS(on) VGS = 10 V, ID = 0.5 • ID25 Pulse test, t £ 300 ms, duty cycle d £ 2 % AC motor speed control for electric vehicles DC servo and robot drives Switched-mode and resonant-mode power supplies DC choppers Advantages g ● Conditions Low RDS(on) HDMOSTM process International standard package Low package inductance for high speed switching Kelvin Source contact for easy drive Direct Copper Bonded Al2O3 ceramic base plate Applications ● Symbol 8 2 Symbol VISOL 11 10 9 ● ● Easy to mount Space and weight savings High power density Low losses V 4 V ±500 nA TJ = 25°C TJ = 125°C 0.5 mA 8 mA 7.4 8.6 mW IXYS reserves the right to change limits, test conditions and dimensions. © 2000 IXYS All rights reserved 031 Additional current limitation by external leads 1-2 VMM 300-03F Symbol Conditions Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. gfs VDS = 10 V; ID = 0.5 • ID25 pulsed 280 S 40 nF 7.2 nF Crss 2.8 nF td(on) 200 ns Ciss Coss VGS = 0 V, VDS = 25 V, f = 1 MHz tr VGS = 10 V, VDS = 0.5 • VDSS, ID = 0.5 • ID25 400 ns td(off) RG = 1 W 400 ns tf 150 ns Qg 1440 nC 240 nC 720 nC Qgs VGS = 10 V, VDS = 150 V, ID = 150 A Qgd RthJC RthJS 0.08 K/W with heat transfer paste Source-Drain Diode 0.12 Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. Symbol Conditions IS VGS = 0 V, TC = 25°C, TJ = TJM ISM K/W VSD IF = 300 A, VGS = 0 V, Pulse test, t £ 300 ms, duty cycle d £ 2 % 0.9 trr IF = 300 A, -di/dt = 400 A/ms, VDS = 0.5 • VDSS 300 290 A 1160 A 1.1 V ns Additional current limitation by external leads Dimensions in mm (1 mm = 0.0394") © 2000 IXYS All rights reserved 2-2