IXSH 45N120B I = 75 A C25 IXST 45N120B V = 1200 V CES "S" Series - Improved SCSOA Capability VCE(sat) = 3.0 V High Voltage IGBT Preliminary data Symbol Test Conditions Maximum Ratings VCES TJ = 25°C to 150°C 1200 V VCGR TJ = 25°C to 150°C; RGE = 1 MW 1200 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C (limited by leads) 75 A IC90 TC = 90°C 45 A ICM TC = 25°C, 1 ms 180 A SSOA (RBSOA) VGE = 15 V, TJ = 125°C, RG = 5 W Clamped inductive load ICM = 90 @ 0.8 VCES A tSC TJ = 125°C, VGE = 720 V; VGE = 15 V, RG = 5 W 10 ms PC TC = 25°C 300 W -55 ... +150 °C TJM 150 °C Tstg -55 ... +150 °C TJ Md Mounting torque (TO-247) 1.13/10 Nm/lb.in. Maximum lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s Weight TO-247 300 °C 6 g TO-247 AD (IXSH) (TAB) G C E TO-268 ( IXST) G E G = Gate S = Emitter (TAB) C = Collector TAB = Collector Features • Epitaxial Silicon drift region - fast switching - small tail current • MOS gate turn-on for drive simplicity Applications Symbol Test Conditions BVCES IC = 1.0 mA, VGE = 0 V 1200 VGE(th) IC = 250 mA, VCE = VGE 3 ICES VCE = 0.8 • VCES Note 1 IGES VCE = 0 V, VGE = ±20 V VCE(sat) IC = IC90, VGE = 15 V Note 2 Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. TJ = 125°C TJ = 125°C IXYS reserves the right to change limits, test conditions, and dimensions. © 2000 IXYS All rights reserved V 2.5 2.6 6 V 50 2.5 mA mA ±100 nA 3.0 V V • • • • AC motor speed control DC servo and robot drives Uninterruptible power supplies (UPS) Switched-mode and resonant-mode power supplies • Welding 98713A (7/00) 1-2 IXSH 45N120B IXST 45N120B Symbol Test Conditions gfs IC = IC90; VCE = 10 V, Note 2 Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. 16 Cies VCE = 25 V, VGE = 0 V, f = 1 MHz 23 S 3300 pF 240 pF Cres 65 pF Qg 120 nC 40 nC 45 nC Inductive load, TJ = 25°C 36 ns IC = IC90, VGE = 15 V RG = 5 W VCE = 0.8 VCES Note 3 27 ns Coes Qge IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc td(on) t ri td(off) tfi Eoff TO-247 AD (IXSH) Outline Dim. Millimeter Min. Max. Inches Min. Max. A B 19.81 20.32 20.80 21.46 0.780 0.800 0.819 0.845 mJ C D 15.75 16.26 3.55 3.65 0.610 0.640 0.140 0.144 360 380 500 750 ns ns 13 22 td(on) Inductive load, TJ = 125°C 38 ns E F 4.32 5.49 5.4 6.2 0.170 0.216 0.212 0.244 t ri IC = IC90, VGE = 15 V RG = 5 W, VCE = 0.8 VCES Note 3 29 ns G H 1.65 2.13 4.5 0.065 0.084 0.177 2.9 mJ 440 700 ns ns J K 1.0 1.4 10.8 11.0 0.040 0.055 0.426 0.433 22 mJ Eon td(off) tfi Eoff L M 4.7 0.4 5.3 0.8 0.185 0.209 0.016 0.031 N 1.5 2.49 0.087 0.102 0.42 K/W RthJC RthCK (TO-247) Notes: 1. 2. 3. 0.25 K/W TO-268AA (D3 PAK) Device must be heatsunk for high temperature leakage current measurements to avoid thermal runaway. Pulse test, t £ 300 ms, duty cycle £ 2 % Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG. Dim. Min. Recommended Footprint A A1 A2 b b2 C D E E1 e H L L1 L2 L3 L4 © 2000 IXYS All rights reserved Millimeter Min. Max. 4.9 5.1 2.7 2.9 .02 .25 1.15 1.45 1.9 2.1 .4 .65 13.80 14.00 15.85 16.05 13.3 13.6 5.45 BSC 18.70 19.10 2.40 2.70 1.20 1.40 1.00 1.15 0.25 BSC 3.80 4.10 IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 Inches Min. Max. .193 .201 .106 .114 .001 .010 .045 .057 .75 .83 .016 .026 .543 .551 .624 .632 .524 .535 .215 BSC .736 .752 .094 .106 .047 .055 .039 .045 .010 BSC .150 .161 2-2