FW156 Ordering number : ENN7784 P-Channel Silicon MOSFET FW156 General-Purpose Switching Device Applications Features • • • • For DC / DC converters, Motor drives, Inverters. Low ON-resistance. Ultrahigh-speed switching. 4V drive. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS --60 Gate-to-Source Voltage VGSS ±20 V ID --3.5 A --14 A 2.0 W 2.3 W Drain Current (DC) Drain Current (Pulse) IDP Allowable Power Dissipation PD PW≤10µs, duty cycle≤1% Mounted on a ceramic board (1200mm2✕0.8mm) 1unit, PW≤10s Mounted on a ceramic board (1200mm ✕0.8mm), V 2 Total Dissipation PT PW≤10s Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current V(BR)DSS IDSS IGSS Conditions ID=--1mA, VGS=0 VDS=--60V, VGS=0 Ratings min typ Unit max --60 V --1 VGS(off) yfs VGS= ±16V, VDS=0 VDS=--10V, ID=--1mA VDS=--10V, ID=--2A RDS(on)1 RDS(on)2 ID=--2A, VGS=--10V ID=--2A, VGS=--4V Input Capacitance Ciss 990 Output Capacitance Coss VDS=--20V, f=1MHz VDS=--20V, f=1MHz 110 pF Reverse Transfer Capacitance Crss VDS=--20V, f=1MHz 76 pF Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance ±10 µA µA --1.2 3 Marking : W156 --2.6 4.6 V S 110 145 mΩ 150 210 mΩ pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 71504 TS IM TA-101156 No.7784-1/4 FW156 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Turn-ON Delay Time td(on) See specified Test Circuit. 12 ns Rise Time tr td(off) See specified Test Circuit. 50 ns See specified Test Circuit. 100 ns tf See specified Test Circuit. 65 ns Turn-OFF Delay Time Fall Time Total Gate Charge Qg VDS=--30V, VGS=--10V, ID=--3.5A 22 nC Gate-to-Source Charge Qgs VDS=--30V, VGS=--10V, ID=--3.5A 4 nC Gate-to-Drain “Miller” Charge Qgd VDS=--30V, VGS=--10V, ID=--3.5A 4 Diode Forward Voltage VSD IS=--3.5A, VGS=0 Package Dimensions unit : mm 2129 VDD= --30V 0.3 6.0 4.4 1.5 0.43 D VOUT PW=10µs D.C.≤1% 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 0.1 1.27 ID= --2A RL=15Ω VIN 0.2 1.8max 4 5.0 0.595 V 0V --10V 5 1 --1.2 Switching Time Test Circuit VIN 8 nC --0.86 G FW156 P.G 50Ω S SANYO : SOP8 --3 --6 --1.0 --3 --2 --1 --0.5 0 0 --4 Ta= 75° C --25° C VGS= --3.0V --1.5 --5 25° C --2.0 Drain Current, ID -- A --4 VDS= --10V --5 .0V 0V --6.0V .0V -8. --2.5 ID -- VGS --7 .5V --10 Drain Current, ID -- A --3.0 .0V ID -- VDS --3.5 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Drain-to-Source Voltage, VDS -- V --0.9 --1.0 IT07094 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 Gate-to-Source Voltage, VGS -- V --3.5 --4.0 IT07095 No.7784-2/4 FW156 RDS(on) -- VGS Ta=25°C ID= --2A 450 400 350 300 250 200 150 100 50 0 --2 --4 --6 --10 --8 --12 --14 Gate-to-Source Voltage, VGS -- V 7 yfs -- ID 1.0 -- = Ta °C 25 °C 75 7 5 3 2 50 --40 --20 0 20 40 60 80 100 120 140 160 IT07097 IF -- VSD VGS=0 3 2 --1.0 7 5 3 2 --0.1 7 5 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 0 5 7 --10 IT07098 Drain Current, ID -- A 2 --0.6 Ciss, Coss, Crss -- pF tr 3 2 td(on) --1.0 --1.2 IT07099 f=1MHz Ciss 1000 tf --0.8 2 td(off) 100 5 --0.4 Ciss, Coss, Crss -- VDS 3 VDD= --30V VGS= --10V 7 --0.2 Diode Forward Voltage, VSD -- V SW Time -- ID 3 Switching Time, SW Time -- ns 100 3 0.1 7 --0.01 7 5 3 2 Coss Crss 100 7 10 5 7 5 --0.1 3 2 3 5 7 --1.0 2 3 5 Drain Current, ID -- A 0 7 --10 IT07100 3 2 VDS= --30V ID= --3.5A --9 --10 7 5 Drain Current, ID -- A --8 --7 --6 --5 --4 --3 3 2 10 15 20 Total Gate Charge, Qg -- nC 25 30 IT07102 --40 --50 --60 IT07101 ASO ≤100µs 1m s ID= --3.5A 10 ms DC 10 0m op era s tio n(P W Operation in this area is limited by RDS(on). 3 2 --1 5 --30 IDP= --14A --1.0 7 5 --2 0 --20 3 2 --0.1 7 5 0 --10 Drain-to-Source Voltage, VDS -- V VGS -- Qg --10 Gate-to-Source Voltage, VGS -- V 2A -I D= --10 7 5 °C 25 V 10 = -, VGS Ambient Temperature, Ta -- °C 5 2 2A -I D= 150 IT07096 VDS= --10V 3 4V -S= , VG 200 0 --60 --16 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S 10 250 Ta=7 5°C 25°C --25°C 0 RDS(on) -- Ta 300 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 500 ≤1 0s ) Ta=25°C Single pulse Mounted on a ceramic board (1200mm2✕0.8mm) 1unit --0.01 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Drain-to-Source Voltage, VDS -- V 5 7 --100 IT07103 No.7784-3/4 PD(FET 1) -- PD(FET 2) 2.4 2.2 M ou 2.0 nte do 1.8 na 1.6 ce ram ic 1.4 bo ard 1.2 (12 00 1.0 mm 2 ✕0 .8m 0.8 m) ,P 0.6 W ≤1 0 s 0.4 PD -- Ta 2.5 Allowable Power Dissipation, PD -- W Allowable Power Dissipation(FET 1), PD -- W FW156 0.2 0 Mounted on a ceramic board (1200mm2✕0.8mm), PW≤10s 2.3 2.0 To t 1.5 al di 1u nit 1.0 ss ip ati on 0.5 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Allowable Power Dissipation(FET 2), PD -- W 2.2 2.4 IT07104 0 20 40 60 80 100 120 140 Ambient Temperature, Ta -- °C 160 IT07105 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2004. Specifications and information herein are subject to change without notice. PS No.7784-4/4