INTERSIL ISL59921IRZ

ISL59920, ISL59921, ISL59922, ISL59923
®
Data Sheet
May 28, 2009
Triple Analog Video Delay Lines
Features
The ISL59920, ISL59921, ISL59922, and ISL59923 are
triple analog delay lines that provide skew compensation
between three high-speed signals. These parts are ideal for
compensating for the skew introduced by a typical CAT-5,
CAT-6 or CAT-7 cable (with differing electrical lengths on
each twisted pair) when transmitting analog video.
• 30, 31, 46.5, or 62ns Total Delay
FN6826.1
• 1.0, 1.5, or 2.0ns Delay Step Increments
• Very Low Offset Voltage
• Drop-in Compatible with the EL9115
• Low Power Consumption
Using a simple serial interface, the ISL59920, ISL59921,
ISL59922, and ISL59923’s delays are programmable in
steps of 2, 1.5, 1, or 2ns (respectively) for up to a total delay
of 62, 46.5, 31, or 30ns (respectively) on each channel. The
gain of the video amplifiers can be set to x1 (0dB) or x2
(6dB) for back-termination. The delay lines require a ±5V
supply.
• 20 Ld QFN Package
• Pb-Free (RoHS Compliant)
Applications
• Skew Control for RGB Video Signals
• Generating Programmable High-speed Analog Delays
Ordering Information
PART
NUMBER
(Note)
PART
MARKING
MAX
DELAY
(ns)
DELAY
STEP
SIZE
(ns)
TYPICAL
POWER
DISSIPATION
(mW)
PACKAGE
(Pb-free)
PKG.
DWG. #
ISL59920IRZ*
59920 IRZ
62
2.0
645
20 Ld 5mmx5mm QFN
L20.5x5C
ISL59921IRZ*
59921 IRZ
46.5
1.5
645
20 Ld 5mmx5mm QFN
L20.5x5C
ISL59922IRZ*
59922 IRZ
31
1.0
645
20 Ld 5mmx5mm QFN
L20.5x5C
ISL59923IRZ*
59923 IRZ
30
2.0
540
20 Ld 5mmx5mm QFN
L20.5x5C
*Add “-T7” suffix for tape and reel. Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100%
matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations).
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J
STD-020.
Pinout
16 VSPO
17 TESTB
18 TESTG
19 TESTR
20 X2
ISL59920, ISL59921, ISL59922, ISL59923
(20 LD 5X5 QFN)
TOP VIEW
VSP 1
15 ROUT
RIN 2
14 GNDO
THERMAL
PAD
GND 3
SCLOCK 10
11 BOUT
SDATA 9
VSM 5
SENABLE 8
12 VSMO
CENABLE 7
GIN 4
BIN 6
1
13 GOUT
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
ISL59920, ISL59921, ISL59922, ISL59923
Absolute Maximum Ratings (TA = +25°C)
Thermal Information
Supply Voltage (VS+ to VS-) . . . . . . . . . . . . . . . . . . . . . . . . . . . .12V
Maximum Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . ±60mA
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
ESD Classification
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300V
Charged Device Model . . . . . . . . . . . . . . . . . . . . . . . . . . . .1200V
Thermal Resistance (Typical, Note 1)
θJA (°C/W)
20 Lead QFN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +135°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTE:
1. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications
PARAMETER
dt
tMAX
VSP = VSPO = +5V, VSM = VSMP = -5V, GAIN = 2, TA = +25°C, exposed die plate = -5V, x2 = 5V,
RLOAD = 150Ω on all video outputs, unless otherwise specified.
DESCRIPTION
Nominal Delay Increment (Note 2)
Maximum Delay
DELDT
Delay Difference Between Channels for Same
Delay Settings On All Channels
tPD
Propagation Delay
BW -3dB
BW ±0.1dB
SR
3dB Bandwidth, 0ns Delay Time
±0.1dB Bandwidth, 0ns Delay Time
Slew Rate
2
CONDITION
MIN
TYP MAX
UNIT
ISL59920
1.8
2
2.2
ns
ISL59921
1.4
1.5
1.7
ns
ISL59922
0.9
1
1.2
ns
ISL59923
1.8
2
2.3
ns
ISL59920
55
62
68
ns
ISL59921
42.5
ISL59922
26.5
31
38.5
ns
ISL59923
26.5
30
34.5
ns
46.5 53.5
ns
1
ns
ISL59920, ISL59923, measured input to
output, delay setting = 0ns
10
ns
ISL59921, measured input to output, delay
setting = 0ns
8
ns
ISL59922, measured input to output, delay
setting = 0ns
7
ns
ISL59920, ISL59923
153
MHz
ISL59921
200
MHz
ISL59922
230
MHz
ISL59920, ISL59923
50
MHz
ISL59921
60
MHz
ISL59922
50
MHz
ISL59920, 20-80, delay = 0ns
550
V/µs
ISL59921, 20-80, delay = 0ns
640
V/µs
ISL59922, 20-80, delay = 0ns
700
V/µs
ISL59923; 20-80, delay = 0ns
550
V/µs
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
Electrical Specifications
PARAMETER
tR - t F
VSP = VSPO = +5V, VSM = VSMP = -5V, GAIN = 2, TA = +25°C, exposed die plate = -5V, x2 = 5V,
RLOAD = 150Ω on all video outputs, unless otherwise specified. (Continued)
DESCRIPTION
Transient Response Time
CONDITION
MIN
TYP MAX
UNIT
ISL59920, 20% to 80%, for any delay, 1V step
delay = 0ns
1.7
ns
ISL59921, 20% to 80%, for any delay, 1V step
delay = 0ns
1.6
ns
ISL59922, 20% to 80%, for any delay, 1V step
delay = 0ns
1.43
ns
ISL59923, 20% to 80%, for any delay, 1V step
delay = 0ns
1.7
ns
For any delay, response to 1V step input
4
%
VOVER
Voltage Overshoot
Glitch
Switching Glitch
Output settling time from last SCLK edge
100
THD
Total Harmonic Distortion
1VP-P 10MHz sinewave, offset by +0.2V at
mid delay setting
-43
-38
dB
X
Crosstalk
Stimulate G, measure R/B at 1MHz,
ISL59920, ISL59921, ISL59923
-80
-63
dB
ISL59922
-78
-59
dB
ns
VN
Output Noise
G_0
Gain Zero Delay
1.74
1.8
1.92
V/V
G_m
Gain Mid Delay
1.67
1.8
1.97
V/V
G_f
Gain Full Delay
1.6
1.8
2
V/V
DG_m0
Difference in Gain, 0 to Mid
-8
0.6
7.5
%
DG_f0
Difference in Gain, 0 to Full
-12
-1.8
10
%
DG_fm
Difference in Gain, Mid to Full
-10
-1.7
7.5
%
VIN
Input Voltage Range
Bandwidth = 150MHz
2
mVRM
S
IB
RIN, GIN, BIN Input Bias Current
ISL59920, Gain remains > 90% of nominal,
Gain = 2
-0.7
1.1
V
ISL59921, Gain remains > 90% of nominal,
Gain = 2
-0.7
1.04
V
ISL59922, Gain remains > 90% of nominal,
Gain = 2
-0.7
1.04
V
ISL59923, Gain remains > 90% of nominal,
Gain = 2
-0.7
1.15
V
8
µA
8
µA
ISL59920, ISL59921
3
ISL59922, ISL59923
1.5
6
VOS
Output Offset Voltage
Post offset calibration (Note 4), Delay = 0ns
and Delay = Full
-25
-4
+20
mV
ZOUT
Output Impedance
ISL59920, ISL59921, Enabled,
Chip enable = 5V
4.5
5.4
6.3
Ω
ISL59922, ISL59923, Enabled,
Chip enable = 5V
3.5
6.3
Ω
Disabled, Chip enable = 0V
8
MΩ
+PSRR
Rejection of Positive Supply
-42
-29
dB
-PSRR
Rejection of Negative Supply
-58
-46
dB
IOUT
Output Drive Current
10Ω load, 0.5V drive
53
70
mA
VIH
Logic High
Switch high threshold
1.6
V
VIL
Logic Low
Switch low threshold
3
43
0.8
V
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
Electrical Specifications
PARAMETER
VSP = VSPO = +5V, VSM = VSMP = -5V, GAIN = 2, TA = +25°C, exposed die plate = -5V, x2 = 5V,
RLOAD = 150Ω on all video outputs, unless otherwise specified. (Continued)
DESCRIPTION
CONDITION
MIN
TYP MAX
UNIT
POWER SUPPLY CHARACTERISTICS
V+
VSP, VSPO Positive Supply Range
+4.5
+5.5
V
V-
VSM, VSMO Negative Supply Range
-4.5
-5.5
V
ISP
Positive Supply Current (Note 3)
Positive Output Supply Current (Note 3)
ISPO
ISM
Negative Supply Current (Note 3)
ISMO
Negative Output Supply Current (Note 3)
ISL59920
98
115
127
mA
ISL59921, ISL59922
98
125
146
mA
ISL59923
74
90
106
mA
ISL59920
11.3
13
15.3
mA
ISL59921, ISL59922
11.3
13
16.3
mA
ISL59923
9.9
13
16
mA
-35.45
-31
-26
mA
ISL59920, ISL59921, ISL59922
-15.5
-13
-11
mA
ISL59923
-17.5
-13
-9.5
mA
ΔISP
Supply Current (Note 3)
Increase in ISP per unit step in delay per
channel
0.9
mA
ISTANDBY
Positive Supply Standby Current (Note 3)
Chip enable = 0V
2.6
mA
SERIAL INTERFACE CHARACTERISTICS
tMAX
Max SCLOCK Frequency
Maximum programming clock speed
tSEN_SETUP
SENABLE to SCLOCK falling edge setup time.
See Figure 34.
SENABLE falling edge should occur at least
tSEN_SETUP ns after previous (ignored) clock
and tSEN_SETUP before next (desired) clock.
Clock edges occurring within t_en_ck of the
SENABLE falling edge will have
indeterminate effect.
tSEN_CYCLE
Minimum Separation Between SENABLE rising
If SENABLE is taken low less than 3µs after it
edge and next SENABLE falling edge. See Figure 34. was taken high, there is a small possibility that
an offset correction will not be initiated.
10
10
3
MHz
ns
µs
NOTES:
2. The limits for the “Nominal Delay Increment” are derived by taking the limits for the “Maximum Delay” and dividing by the number of steps for the
device. For the ISL59920, ISL59921, and ISL59922 the number of steps is 31; for the ISL59923 the number of steps is 15.
3. All supply currents measured with Delay R = 0ns, G = mid delay, B = full delay.
4. Offset measurements are referred to 75Ω load as shown in Figure 1.
75Ω
VIN
VOUT
VOS
x2 -
75Ω
FIGURE 1. VOS MEASUREMENT CONDITIONS
4
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
Pin Descriptions
PIN NUMBER
PIN NAME
1
VSP
PIN DESCRIPTION
+5V for delay circuitry and input amp
Red channel video input
2
RIN
3
GND
0V for delay circuitry supply
4
GIN
Green channel video input
5
VSM
-5V for input amp
Blue channel video input
6
BIN
7
CENABLE
Chip Enable input, active high: logical high enables chip, low disables chip
8
SENABLE
Serial Enable input, active low: logical low enables serial communication
9
SDATA
Serial Data input, logic threshold 1.2V: data to be programmed into chip
10
SCLOCK
11
BOUT
Blue channel video output
12
VSMO
-5V for video output buffers
13
GOUT
Green channel video output
14
GNDO
0V reference for input and output buffers
15
ROUT
Red channel video output
16
VSPO
+5V for video output buffers
17
TESTB
18
TESTG
Green channel phase detector output
19
TESTR
Red channel phase detector output
20
X2
Thermal Pad
Serial Clock input: Clock to enter data; logical; data written on negative edge
Blue channel phase detector output
Gain Select Input: logical high = 2x (+6dB), logical low = 1x (0dB)
MUST be tied to -5V. For best thermal conductivity also tie to a larger -5V copper plane (inner
or bottom). Use many vias to minimize thermal resistance between thermal pad and copper
plane. Do not connect to GND - connection to GND is equivalent to shorting the -5V and GND
planes together.
5
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
Typical Performance Curves
0ns
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8 VIN = 700mVP-P
-9 GAIN = 2
-10
100k
1M
20ns
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
2
1
0
-1
-2
-3
-4
-5
-6
-7
VIN = 700mVP-P
-8
GAIN = 1
-9
-10
100k
1M
40ns
10ns
62ns
30ns
50ns
10M
100M
1G
FIGURE 2. ISL59920 FREQUENCY RESPONSE (GAIN = 1)
10.5ns
-2
46.5ns
21ns
-4
30ns
-6
VIN = 700mVP-P
GAIN = 1
100k
1M
10M
100M
NORMALIZED MAGNITUDE (dB)
NORMALIZED MAGNITUDE (dB)
0
10M
100M
1G
0ns
46.5ns
-2
10.5ns
21ns
-4
-6
30ns
-8
-10
1G
VIN = 700mVP-P
GAIN = 2
100k
1M
10M
100M
1G
FREQUENCY (Hz)
FIGURE 4. ISL59921 FREQUENCY RESPONSE (GAIN = 1)
FIGURE 5. ISL59921 FREQUENCY RESPONSE (GAIN = 2)
4
4
NORMALIZED MAGNITUDE (dB)
NORMALIZED MAGNITUDE (dB)
50ns
0
FREQUENCY (Hz)
0ns
2
0
10ns
-2
31ns
20ns
-4
-6
-10
62ns
30ns
2
0ns
-8
40ns
10ns
FIGURE 3. ISL59920 FREQUENCY RESPONSE (GAIN = 2)
2
-10
20ns
FREQUENCY (Hz)
FREQUENCY (Hz)
-8
0ns
VIN = 700mVP-P
GAIN = 1
100k
1M
10M
100M
1G
FREQUENCY (Hz)
FIGURE 6. ISL59922 FREQUENCY RESPONSE (GAIN = 1)
6
0ns
2
10ns
0
-2
31ns
-4
-6
-8
-10
20ns
VIN = 700mVP-P
GAIN = 2
100k
1M
10M
100M
1G
FREQUENCY (Hz)
FIGURE 7. ISL59922 FREQUENCY RESPONSE (GAIN = 2)
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
Typical Performance Curves (Continued)
2
NORMALIZED MAGNITUDE (dB)
NORMALIZED MAGNITUDE (dB)
2
0ns
0
10ns
-2
-4
30ns
20ns
-6
-8
-10
VIN = 700mVP-P
GAIN = 1
100k
1M
10M
100M
0ns
0
-4
30ns
-8
VIN = 700mVP-P
GAIN = 2
100k
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
FIGURE 8. ISL59923 FREQUENCY RESPONSE (GAIN = 1)
20ns
-6
-10
1G
10ns
-2
100M
1G
FIGURE 9. ISL59923 FREQUENCY RESPONSE (GAIN = 2)
250
OUTPUT REFERRED
GAIN = 2
TIMEBASE: 500ns/div
SENABLE: 1V/div
OUTPUT: 100mV/div
GAIN: 1
OUTPUT
SPECTRUM (nV/√Hz)
SENABLE
200
150
100
50
0
0M
100M
200M
300M
400M
500M
600M
FREQUENCY (Hz)
FIGURE 10. OFFSET CORRECTION DAC ADJUST
FIGURE 11. ISL59920 NOISE SPECTRUM (10k TO 500MHz)
250
200
160
SPECTRUM (nV/√HZ)
SPECTRUM (nV/√HZ)
180
140
120
100
80
60
40
20 OUTPUT REFERRED
GAIN = 2
0
0M
100M
200M
300M
400M
FREQUENCY (Hz)
150
100
50
OUTPUT REFERRED
GAIN = 2
500M
600M
FIGURE 12. ISL59921 NOISE SPECTRUM (10k TO 500MHz)
7
200
0
0M
100M
200M
300M
400M
FREQUENCY (Hz)
500M
600M
FIGURE 13. ISL59922 NOISE SPECTRUM (10k TO 500MHz)
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
Typical Performance Curves (Continued)
250
3.0
200
2.5
RISE/FALL TIME
SPECTRUM (nV/√HZ)
RISE
150
100
50
100M
1.5
FALL
1.0
0.5
OUTPUT REFERRED
GAIN = 2
0
0M
2.0
200M
300M
400M
FREQUENCY (Hz)
500M
0
600M
0
4
FIGURE 15. ISL59920 RISE/FALL TIME vs DELAY TIME
(GAIN = 2)
2.0
3.0
FALL
1.8
1.6
FALL
RISE/FALL TIME
RISE/FALL TIME
2.5
2.0
1.5
RISE
1.2
RISE
1.0
0.8
0.6
0.2
0
4
8
12
16
20 24 28
DELAY (ns)
32
36
40
44
0
0
48
FIGURE 16. ISL59921 RISE/FALL TIME vs DELAY TIME
(GAIN = 2)
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30 32
DELAY (ns)
FIGURE 17. ISL59922 RISE/FALL TIME vs DELAY TIME
(GAIN = 2)
0
HARMONIC DISTORTION (dBc)
2.5
FALL
2.0
RISE/FALL TIME
1.4
0.4
0.5
0
12 16 20 24 28 32 36 40 44 48 52 56 60
DELAY (ns)
FIGURE 14. ISL59923 NOISE SPECTRUM (10k TO 500MHz)
1.0
8
1.5
RISE
1.0
0.5
0
0
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30 32
DELAY (ns)
FIGURE 18. ISL59923 RISE/FALL TIME vs DELAY TIME
(GAIN = 2)
8
V+ = +5.0V, V- = -5.0V
VOUT = 1.0VP-P, SINE WAVE
RL = 150Ω
GAIN = 2
-10
-20
-30
-40
-50
2ND HD
-60
3RD HD
-70
-80
2M
6M
10M
14M
18M 22M 26M
FREQUENCY (Hz)
30M
34M
38M
FIGURE 19. HARMONIC DISTORTION vs FREQUENCY
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
180
160
POSITIVE SUPPLY CURRENT (mA)
POSITIVE SUPPLY CURRENT (mA)
Typical Performance Curves (Continued)
3 CHANNELS
140
120
100
2 CHANNELS
1 CHANNEL
80
GAIN = 2
60
0
4
8
12 16 20 24 28 32 36 40 44 48 52 56 60
DELAY (ns)
220
200
3 CHANNELS
180
160
140
120
100
1 CHANNEL
2 CHANNELS
80 GAIN = 2
NO INPUT, NO LOAD
60
0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48
DELAY (ns)
220
150
200
180
3 CHANNELS
160
140
120
100
2 CHANNELS
1 CHANNEL
80 GAIN = 2
NO INPUT, NO LOAD
60
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
DELAY (ns)
FIGURE 22. ISL59922 POSITIVE SUPPLY CURRENT (VSP) vs
DELAY TIME
180
DELAY = 62ns
160
140
120
DELAY = 0ns
100
80
GAIN = 1 OR 2
60
4.0
4.2
4.4
4.6
4.8
5.0 5.2
5.4
SUPPLY VOLTAGE (V)
5.6
FIGURE 24. ISL59920 ISUPPLY+ vs VSUPPLY+
9
5.8
6.0
140
3 CHANNELS
130
120
110
100
90
2 CHANNELS
1 CHANNEL
80
70 GAIN = 2
NO INPUT, NO LOAD
60
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
DELAY (ns)
FIGURE 23. ISL59923 POSITIVE SUPPLY CURRENT (VSP) vs
DELAY TIME
NEGATIVE SUPPLY CURRENT (mA)
SUPPLY CURRENT (mA)
200
POSITIVE SUPPLY CURRENT (mA)
FIGURE 21. ISL59921 POSITIVE SUPPLY CURRENT (VSP) vs
DELAY TIME
POSITIVE SUPPLY CURRENT (mA)
FIGURE 20. ISL59920 POSITIVE SUPPLY CURRENT (VSP) vs
DELAY TIME
-42.5
-43.0
-43.5
DELAY = 62ns
-44.0
-44.5
-44.0
DELAY = 0ns
-45.5
-46.0
GAIN = 1 OR 2
-46.5
-4.0 -4.2 -4.4 -4.6
-4.8
-5.0
-5.2
-5.4
-5.6
-5.8
-6.0
SUPPLY VOLTAGE (V)
FIGURE 25. ISL59920 ISUPPLY- vs VSUPPLY-
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
Typical Performance Curves (Continued)
SUPPLY CURRENT (mA)
220
NEGATIVE SUPPLY CURRENT (mA)
240
DELAY = 46.5ns
200
180
160 GAIN = 1 OR 2
DELAY APPLIED TO ALL
140 CHANNELS
120 NO INPUT, NO LOAD
100
DELAY = 0ns
80
60
4.0
4.2
4.4
4.6
4.8
5.0 5.2
5.4
SUPPLY VOLTAGE (V)
5.6
5.8
6.0
-46.0
GAIN = 2
-46.5
-47.0 DELAY = 46.5ns
-47.5
-48.0
-48.5
-49.0
-49.5
DELAY = 0ns
-50.0
-50.5
-51.0
4.0
FIGURE 26. ISL59921 ISUPPLY+ vs VSUPPLY+
SUPPLY CURRENT (mA)
NEGATIVE SUPPLY CURRENT (mA)
DELAY = 31ns
180
160
GAIN = 1 OR 2
140 DELAY APPLIED TO ALL
120 CHANNELS
NO INPUT, NO LOAD
100
DELAY = 0ns
80
60
4.0
4.2
4.4
4.6
4.8
5.0
5.2
5.4
SUPPLY VOLTAGE (V)
5.6
5.8
6.0
SUPPLY CURRENT (mA)
120
110
100
DELAY = 0ns
70
60
4.0
GAIN = 1 OR 2
DELAY APPLIED TO ALL
CHANNELS
NO INPUT, NO LOAD
4.2
4.4
4.6
4.8
5.0 5.2
5.4
SUPPLY VOLTAGE (V)
5.6
5.8
FIGURE 30. ISL59923 ISUPPLY+ vs VSUPPLY+
10
6.0
NEGATIVE SUPPLY CURRENT (mA)
DELAY = 30ns
130
80
4.8
5.0 5.2
5.4
SUPPLY VOLTAGE (V)
5.6
5.8
6.0
GAIN = 2
-45.5 DELAY = 31ns
-46.0
-46.5
-47.0
-47.5
-48.0
-48.5
-49.0 DELAY = 0ns
-49.5
-50.0
-50.5
4.0
4.2
4.4
4.6
4.8
5.0 5.2
5.4
SUPPLY VOLTAGE (V)
5.6
5.8
6.0
FIGURE 29. ISL59922 ISUPPLY- vs VSUPPLY-
150
90
4.6
-45.0
FIGURE 28. ISL59922 ISUPPLY+ vs VSUPPLY+
140
4.4
FIGURE 27. ISL59921 ISUPPLY- vs VSUPPLY-
220
200
4.2
-46.0
GAIN = 2
DELAY = 30ns
-46.5
-47.0
-47.5
-48.0
-48.5 DELAY = 0ns
-49.0
-49.5
4.0
4.2
4.4
4.6
4.8
5.0 5.2
5.4
SUPPLY VOLTAGE (V)
5.6
5.8
6.0
FIGURE 31. ISL59923 ISUPPLY- vs VSUPPLY-
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
Typical Performance Curves (Continued)
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD - QFN EXPOSED
DIEPAD SOLDERED TO PCB PER JESD51-5
4.5
POWER DISSIPATION (W)
4.0
3.54W
θ
JA
3.5
3.0
QF
N
=3
1°
20
C/
W
2.5
2.0
1.5
1.0
0.5
0
0
25
50
75 85 100
125
150
AMBIENT TEMPERATURE (°C)
8
16
TESTR
TESTB
TESTG
VSPO
+
GIN
DELAY LINE
+
BIN
CENABLE 7
+
ROUT 15
+
GOUT 13
+
BOUT 11
DELAY LINE
+
DELAY LINE
X2 20
SDATA
SCLOCK
SENABLE
CONTROL LOGIC
[BOTTOM PLATE]
3
5
C
GND
9
10
18
VSMO
6
17
VSM
4
RIN
19
GND
2
1
VSP
FIGURE 32. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE
12
14
FIGURE 33. ISL59920, ISL59921, ISL59922, ISL59923 BLOCK DIAGRAM
Applications Information
The ISL59920, ISL59921, ISL59922, and ISL59923 are
triple analog delay lines that provide skew compensation
between three high-speed signals. These devices
compensate for time skew introduced by a typical CAT-5,
CAT-6 or CAT-7 cable with differing electrical lengths (due to
different twist ratios) on each pair. Via their SPI interface,
these devices can be programmed to independently
compensate for the three different cable delays while
maintaining 80MHz bandwidth at their maximum setting.
There are four different variations of the ISL5992x (ISL5992x
will be used when talking about characteristics that are
common to all four devices).
11
TABLE 1.
PART NUMBER
MAX DELAY
(ns)
NOMINAL DELAY
INCREMENT
(ns)
ISL59920
62
2.0
ISL59921
46.5
1.5
ISL59922
31
1.0
ISL59923
30
2.0
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
SENABLE
tSEN_CYCLE
tSEN_SETUP
SCLOCK
SDATA
0
*D0 is 0 when addressing the test register
A1
A0
D4
D3
D2
D1
D0*
a
b
v
w
x
y
z
FIGURE 34. SERIAL TIMING
Figure 33 shows the ISL5992x block diagram. The 3 analog
inputs are ground referenced single-ended signals. After the
signal is received, the delay is introduced by switching filter
blocks into the signal path. Each filter block is an all-pass
filter introducing either 1, 1.5 or 2ns of delay. In addition to
adding delay, each filter block also introduces some low
pass filtering. As a result, the bandwidth of the signal path
decreases from the 0ns delay setting to the maximum delay
setting, as shown in Figures 2 through 9 of the “Typical
Performance Curves”.
TABLE 2. SERIAL BUS DATA (Continued)
vwxyz
ISL59920
DELAY
ISL59921
DELAY
ISL59922
DELAY
ISL59923
DELAY
00100
8
6
4
8
00101
10
7.5
5
10
00110
12
9
6
12
00111
14
10.5
7
14
01000
16
12
8
16
01001
18
13.5
9
18
01010
20
15
10
20
01011
22
16.5
11
22
01100
24
18
12
24
Serial Bus Operation
01101
26
19.5
13
26
The ISL5992x is programmed via 8-bit words sent through
its serial interface. The first bit (MSB) of SDATA is latched on
the first falling clock edge after SENABLE goes low, as
shown in Figure 34. This bit should be a 0 under all
conditions. The next two bits determine the color register to
be written to: 01 = R, 02 = G, and 03 = B (00 is reserved for
the test register). The final five bits set the delay for the
specified color. After 8 bits are latched, any additional clocks
are treated as a new word (data is shifted directly to the final
registers as it is clocked in). This allows the user to write (for
example) the 24 bits of data necessary for R, G, and B as a
single 24-bit word. It is the user's responsibility to send
complete multiples of 8 clock cycles. The serial state
machine is reset on the falling edge of SENABLE, so any
data corruption that may have occurred due to too many or
too few clocks can be corrected with a new word with the
correct number of clocks. The initial value of all registers on
power-up is 0.
01110
28
21
14
28
01111
30
22.5
15
30
10000
32
24
16
N/A
10001
34
25.5
17
N/A
10010
36
27
18
N/A
10011
38
28.5
19
N/A
10100
40
30
20
N/A
10101
42
31.5
21
N/A
10110
44
33
22
N/A
10111
46
34.5
23
N/A
11000
48
36
24
N/A
11001
50
37.5
25
N/A
11010
52
39
26
N/A
11011
54
40.5
27
N/A
11100
56
42
28
N/A
11101
58
43.5
29
N/A
11110
60
45
30
N/A
11111
62
46.5
31
N/A
In operation, it is best to allocate the most delayed signal
0ns delay then increase the delay on the other channels to
bring them into line. This will result in delay compensation
with the lowest power and distortion.
TABLE 2. SERIAL BUS DATA
vwxyz
ISL59920
DELAY
ISL59921
DELAY
ISL59922
DELAY
ISL59923
DELAY
00000
0
0
0
0
00001
2
1.5
1
2
00010
4
3
2
4
00011
6
4.5
3
6
12
NOTE: Delay register word = 0abvwxyz; Red register - ab = 01;
Green register - ab = 10; Blue register - ab = 11; vwxyz selects
delay; ab = 00 writes to the test register to change the DAC slice
level.
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
Offset Compensation
TESTB pulse = BLUEOUT with respect to REDOUT
To counter the effects of offset, the ISL5992x incorporates an
offset compensation circuit that reduces the offset to less than
±25mV. An offset correction cycle is triggered by the rising
edge of the SENABLE pin after writing a delay word to any of
the 3 channels. The offset calibration starts about 500ns after
the SENABLE rising edge to allow the ISL5992x time to settle
(electrically and thermally) to the new delay setting. It lasts
about 2.5µs, for a total offset correction time of 3.0µs. During
calibration, the ISL5992x’s inputs are internally shorted
together (however the characteristics of the ISL5992x’s
differential input pins stay the same), and the offset of the
output stage is adjusted until it has been minimized.
Averaging the current gives a direct measure of the delay
between the two edges. When A precedes B, the current
pulse is +50µA, and the output voltage goes up. When B
precedes A, the pulse is -50µA.
In addition to automatically triggering after a delay change
(or any register write), an additional offset calibration may be
initiated at any time, such as:
• When the die temperature changes. Applying power to the
ISL5992x will cause the die temperature to quickly increase
then slowly settle over 20 to 30 seconds. Because the
ISL5992x powers-down unused delay stages (to minimize
power consumption), the die temp will also change and
settle after a delay change. Initiating an offset 20 seconds
(or longer, depending on the thermal characteristics of the
system) after power-on or a delay change will minimize the
offset in normal operation thereafter.
• When the ambient temperature changes. If you are
monitoring the temperature, initiate a calibration every time
the temperature shifts by 5 to 10 degrees. If you are not
monitoring temperature, initiate a calibration periodically, as
expected by the environment the device is in.
• After a CENABLE (Chip Enable) cycle. The CENABLE pin
may be taken low to put the ISL5992x in a low power
standby mode to conserve power when not needed. When
the CENABLE pin goes high to exit this low power mode,
the ISL5992x will recall the delay settings but it will not
recall the correct offset calibration settings, so to maintain
low offset, a write to the delay register is required after a
CENABLE cycle. Offset errors may be as large as
±200mV coming out of standby mode - recalibration is a
necessity. For best performance, initiate an additional
calibration again once the die temperature has settled (20
to 30 seconds after coming out of standby).
• After a gain change (X2 pin changes state). The systematic
offset is different for a gain of x1 vs. a gain of x2, so an
offset calibration is recommended after a gain change.
However in a typical application the gain is permanently
fixed at x1 or x2, so this is not usually a concern.
For the logic to work correctly, A and B must have a period of
overlap while they are high (a delay longer than the pulse
width cannot be measured).
Signals A and B are derived from the video input by
comparing the video signal with a slicing level, which is set by
an internal DAC. This enables the delay to be measured
either from the rising edges of sync-like signals encoded on
top of the video or from a dedicated set-up signal. The outputs
can be used to set the correct delays for the signals received.
The DAC level is set through the serial input by bits 1
through 4 directed to the test register (00).
INTERNAL DAC VOLTAGE
The slice level of the internal DAC may be programmed by
writing a byte to the test register (00). Table 3 shows the
values that should be written to change the DAC slice level.
Please keep in mind when writing to the test register that the
LSB should always be zero.
Referred to the input, the DAC slice range for the ISL5992x
is cut in half for gain of 2 mode because the slicing occurs
after the x1/x2 stage output amplifier. (In the EL9115, the
slicing occurred before the amplifier so the range of the DAC
voltage was the same for either gain of 1 or gain of 2).
4 INTERNAL DAC
SLICING LEVEL
000wxyz0
COMPARATORS
REDOUT
A
TESTR
B
GREENOUT
A
TESTG
B
BLUEOUT
A
TESTB
B
Test Pins
Three test pins are provided (Test R, Test G, Test B). During
normal operation, the test pins output pulses of current for a
duration of the overlap between the inputs, as shown in
Figure 35:
TESTR pulse = REDOUT (A) with respect to GREENOUT (B)
TESTG pulse = GREENOUT with respect to BLUEOUT
13
A
B
OUTPUT
FIGURE 35. DELAY DETECTOR
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
TABLE 3. DAC VOLTAGE RANGE - INPUT REFERRED
Power Dissipation
As the delay setting increases, additional filter blocks turn on
and insert into the signal path. When the delay per channel
increments, VSP current increases by 0.9mA while VSM
does not change significantly. Under the extreme settings,
the positive supply current reaches 141mA and the negative
supply current can be 41mA. Operating at ±5V power supply,
the worst-case ISL5992x power dissipation is:
wxyz
DAC RANGE [mV]
(GAIN 1)
DAC RANGE [mV]
(GAIN 2)
1000
-400
-200
1001
-350
-175
1010
-300
-150
1011
-250
-125
1100
-200
-100
1101
-150
-75
1110
-100
-50
The minimum θJA required for long term reliable operation of
the ISL5992x is calculated using Equation 2:
1111
-50
-25
θ JA = ( T J – T A ) ⁄ PD = 55° C ⁄ W
0000
0
0
0001
50
25
0010
100
50
0011
150
75
0100
200
100
0101
250
125
0110
300
150
0111
350
175
NOTE: Test Register word = 000wxyz0. wxyz fed to DAC. z is LSB
14
PD = 5 • 141mA + 5 • 41mA = 910mW
(EQ. 1)
(EQ. 2)
Where:
TJ is the maximum junction temperature (+135°C)
TA is the maximum ambient temperature (+85°C)
For a 20 Ld package on a well laid-out PCB with good
connectivity between the QFN’s pad and the PCB copper
area, 31°C/W θJA thermal resistance can be achieved. This
yields a much higher power dissipation of 3.54W using
Equation 2 (see Figure 32). To disperse the heat, the bottom
heat spreader must be soldered to the PCB. Heat flows
through the heat spreader to the circuit board copper then
spreads and convects to air. Thus, the PCB copper plane
becomes the heatsink (see TB389). This has proven to be a
very effective technique. A separate application note, which
details the 20 Ld QFN PCB design considerations, is
available.
FN6826.1
May 28, 2009
ISL59920, ISL59921, ISL59922, ISL59923
Quad Flat No-Lead Plastic Package (QFN)
A
20 LEAD QUAD FLAT NO-LEAD PLASTIC PACKAGE
(COMPLIANT TO JEDEC MO-220)
B
N
(N-1)
(N-2)
D
1
2
3
L20.5x5C
MILLIMETERS
SYMBOL
PIN #1
I.D. MARK
E
(2X)
0.075 C
TOP VIEW
(2X)
(N/2)
0.075 C
SEATING
PLANE
MAX
NOTES
A
0.80
0.90
1.00
-
0.00
0.02
0.05
-
b
0.28
0.30
0.32
-
c
0.20 REF
-
D
5.00 BASIC
-
D2
3.70 REF
8
E
5.00 BASIC
-
E2
3.70 REF
8
e
0.10 C
e
NOMINAL
A1
L
C
MIN
0.65 BASIC
0.35
0.40
0.45
-
N
20
4
ND
5 REF
6
NE
5 REF
5
Rev. 0 6/06
0.08 C
N LEADS AND
EXPOSED PAD
NOTES:
SEE DETAIL “X”
1. Dimensioning and tolerancing per ASME Y14.5M-1994.
SIDE VIEW
2. Tiebar view shown is a non-functional feature.
3. Bottom-side pin #1 I.D. is a diepad chamfer as shown.
4. N is the total number of terminals on the device.
b
L
N LEADS
(N-2)
(N-1)
N
0.01 M C A B
PIN #1 I.D.
3
1
2
3
NE 5
(N/2)
6. ND is the number of terminals on the “D” side of the package
(or X-direction). ND = (N/2)-NE.
7. Inward end of terminal may be square or circular in shape with
radius (b/2) as shown.
(E2)
(D2)
5. NE is the number of terminals on the “E” side of the package
(or Y-direction).
8. If two values are listed, multiple exposed pad options are
available. Refer to device-specific datasheet.
9. One of 10 packages in MDP0046
7
BOTTOM VIEW
C
A
2
(c)
A1
(L)
N LEADS
DETAIL “X”
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
15
FN6826.1
May 28, 2009