VECTRON TFS150C

Tfs150C.doc
version 1.2
VI TELEFILTER
Filter Specification
29.01.2001
TFS 150C
1/5
Measurement condition
Ambient temperature:
23 °C
Input power level:
0 dBm
Terminating impedances:
for input:
930 Ohm // -1.6 pF (measured between the two source pins)
for output:
930 Ohm // -1.6 pF (measured between the two load pins)
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 150C is the maxiimum in the usable signal bandwidth. The maximum attenuation amax
in the usable signal bandwidth is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower
frequencies at the 3dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 150,4 MHz without tolerance.
The given values for the relative attenuation arel have to be reached at the frequencies given below also if the centre frequency fc is shifted due to
the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc
Data
typ. value
tolerance/limit
Insertion loss
(Reference level)
ae
2,8
Nominal frequency
fN
-
Centre frequency
fC
150,41
MHz
-
107
kHz
-
3 dB bandwidth
BW
Usable signal band width
Relative attenuation
@fN ± 910 kHz
dB
65
5
150,4
arel
max.
dB
dB
MHz
min.fN±10
kHz
min.
dB
60
Operating temperature range
-
- 20 °C ... + 70 °C
Storage temperature range
-
- 30 °C ... + 85 °C
Temperature coefficient of frequency
Frequency inversion temperature
TC
ca. – 0,036 ppm/K²
30
°C
-
Generated:
Checked / approved:
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs150C.doc
version 1.2
VI TELEFILTER
29.01.2001
Filter Specification
TFS 150C
2/5
Construction, pin configuration and 50 Ω - matching network
(All dimensions in mm)
S150C
tft N03
Date code:
L
M
N
...
Year + week
1999
2000
2001
Pin 1,2:
Pin 6,7:
Pin 3,4,5,8
9,10
balanced Output
balanced Input
Ground
Date code
1
2
3
10
4
9
5
8
7
6
50 Ohm Test circuit 1
L1
50 Ohm
7
SAW
C1
6
L2
L4
2
50 Ohm
C2
1
L3
3, 4, 5, 8, 9, 10
50 Ohm Test circuit 2
C1
C4
7
50 Ohm
2
SAW
L1
6
1
C2
50 Ohm
L2
C3
3, 4,5,8,9,10
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs150C.doc
version 1.2
VI TELEFILTER
29.01.2001
Filter Specification
TFS 150C
3/5
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Real of empty components at start:
Real of empty components at start including leader:
Trailer
Tape (all dimensions in mm)
W
Po
Do
:
:
:
16
± 0,3
4
± 0,1
1,5 + 0,1
E
:
F
:
G (min) :
P2
:
1,75 ± 0,1
7,5 ± 0,1
0,6
2 ± 0,1
P1
:
D1(min) :
Ao
:
12
1,5
7,6
± 0,1
Bo
:
9,6
± 0,1
CT
:
2000
min 300 mm
min 500 mm
min 300 mm
EMBOSSED CARRIER TAPE
Do
Po
P2
E
Ao
F
D1
CT
W
Bo
G
± 0,1
P1
COVER TAPE
13,5 + 0,1
W 2
Reel (all dimensions in mm):
A
:
W1
W2 (max) :
:
N (min)
:
330
16,4 +2
22,4
60
C
C
:
12,8
± 0,1
A
N
W 1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on
the right side of the tape.
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs150C.doc
version 1.2
VI TELEFILTER
29.01.2001
Filter Specification
TFS 150C
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods
150 °C - 170 °C
60 sec. - 90 sec.
main-heating periods
over 200 °C
20 sec. - 25 sec.
peak temperature
255 °C ± 5 °C
Chip-mount air reflow profile
260
240
220
200
temperature / °C
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
temperature / °C
23
34
46
60
80
103
121
134
143
150
154
156
158
159
time / sec.
140
150
160
170
180
190
195
200
205
210
215
220
230
240
temperature / °C
160
161
164
170
180
205
230
255
230
205
180
165
140
120
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Tfs150C.doc
version 1.2
VI TELEFILTER
Filter Specification
29.01.2001
TFS 150C
5/5
History
Version
Reason of Changes
Name
Date
1.0
Generation of specification according to customer requirements.
Dr. Wall
06 / 1997
1.1
Correct pinning information
Correct tape and reel information
Add history
Dr. Wall
23.01.2001
1.2
Change pin 1 marker from ! to tft
Dr. Wall
29.01.2001
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.