ON Semiconductort PNP High−Current Complementary Silicon Power Transistors 2N5684 NPN 2N5686 . . . designed for use in high−power amplifier and switching circuit applications. • High Current Capability − • • w IC Continuous = 50 Amperes. DC Current Gain − hFE = 15−60 @ IC = 25 Adc Low Collector−Emitter Saturation Voltage − VCE(sat) = 1.0 Vdc (Max) @ IC = 25 Adc 50 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS 60 −80 VOLTS 300 WATTS These devices are available in Pb−free package(s). Specifications herein apply to both standard and Pb−free devices. Please see our website at www.onsemi.com for specific Pb−free orderable part numbers, or contact your local ON Semiconductor sales office or representative. ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ MAXIMUM RATINGS (1) Symbol 2N5684 2N5686 Unit VCEO 80 Vdc Collector−Base Voltage VCB 80 Vdc Emitter−Base Voltage VEB 5.0 Vdc Collector Current − Continuous IC 50 Adc Base Current IB 15 Adc Total Device Dissipation @ TC = 25_C Derate above 25_C PD 300 1.715 Watts W/_C TJ, Tstg −65 to + 200 _C Rating Collector−Emitter Voltage Operating and Storage Junction Temperature Range CASE 197A−05 TO−204AE THERMAL CHARACTERISTICS (1) Characteristic Thermal Resistance, Junction to Case Symbol Max Unit θJC 0.584 _C/W (1) Indicates JEDEC Registered Data. PD, POWER DISSIPATION (WATTS) 300 250 200 150 100 50 0 0 20 40 60 80 100 120 140 TEMPERATURE (°C) 160 180 200 Figure 1. Power Derating Safe Area Curves are indicated by Figure 5. All limits are applicable and must be observed. © Semiconductor Components Industries, LLC, 2006 March, 2006 − Rev. 11 1 Publication Order Number: 2N5684/D 2N5684 2N5686 ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎ *ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) Characteristic Symbol Min Max 80 − − 1.0 − − 2.0 10 − 2.0 − 5.0 15 5.0 60 − − − 1.0 5.0 Unit OFF CHARACTERISTICS Collector−Emitter Sustaining Voltage (Note 2) (IC = 0.2 Adc, IB = 0) VCEO(sus) Collector Cutoff Current (VCE = 40 Vdc, IB = 0) ICEO Collector Cutoff Current (VCE = 80 Vdc, VEB(off) = 1.5 Vdc) (VCE = 80 Vdc, VEB(off) = 1.5 Vdc, TC = 150_C) ICEX Collector Cutoff Current (VCB = 80 Vdc, IE = 0) ICBO Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) IEBO Vdc mAdc mAdc mAdc mAdc ON CHARACTERISTICS DC Current Gain (Note 2) (IC = 25 Adc, VCE = 2.0 Vdc) (IC = 50 Adc, VCE = 5.0 Vdc) hFE − Collector−Emitter Saturation Voltage (Note 2) (IC = 25 Adc, IB = 2.5 Adc) (IC = 50 Adc, IB = 10 Adc) VCE(sat) Vdc Base−Emitter Saturation Voltage (Note 1) (IC = 25 Adc, IB = 2.5 Adc) VBE(sat) − 2.0 Vdc Base−Emitter On Voltage (Note 1) (IC = 25 Adc, VCE = 2.0 Vdc) VBE(on) − 2.0 Vdc DYNAMIC CHARACTERISTICS Current−Gain − Bandwidth Product (IC = 5.0 Adc, VCE = 10 Vdc, f = 1.0 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, f = 0.1 MHz) 2N5684 2N5686 Small−Signal Current Gain (IC = 10 Adc, VCE = 5.0 Vdc, f = 1.0 kHz) *Indicates JEDEC Registered Data. Note 2: Pulse Test: Pulse Width v 300 μs, Duty Cycle v 2.0%. VCC fT 2.0 − MHz Cob − − 2000 1200 pF hfe 15 − −30 V RL +2.0 V TO SCOPE tr ≤ 20 ns 0 RB 1.0 0.7 0.5 −12V tr ≤ 20ns DUTY CYCLE ≈ 2.0% VCC TO SCOPE tr ≤ 20 ns 0 RB tr ≤ 20ns 10 to 100 μs −30 V RL +10V −12V t, TIME (s) μ 10 to 100 μs VBB tr 0.3 0.2 td 0.1 0.07 0.05 0.03 0.02 TJ = 25°C IC/IB = 10 VCC = 30 V 0.01 0.5 0.7 1.0 +4.0 V 2N5684 (PNP) 2N5686 (NPN) DUTY CYCLE ≈ 2.0% 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (AMP) Figure 3. Turn−On Time FOR CURVES OF FIGURES 3 & 6, RB & RL ARE VARIED. INPUT LEVELS ARE APPROXIMATELY AS SHOWN. FOR NPN CIRCUITS, REVERSE ALL POLARITIES. Figure 2. Switching Time Test Circuit http://onsemi.com 2 30 50 r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) 2N5684 2N5686 1.0 0.7 0.5 D = 0.5 0.3 0.2 0.2 P(pk) θJC(t) = r(t) θJC θJC = 0.584°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN t1 READ TIME AT t1 t2 TJ(pk) − TC = P(pk) θJC(t) DUTY CYCLE, D = t1/t2 0.1 0.1 0.07 0.05 0.05 0.02 0.03 0.02 0.01 SINGLE PULSE 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 t, TIME (ms) 20 50 100 200 500 1000 2000 Figure 4. Thermal Response IC, COLLECTOR CURRENT (AMP) 100 20 10 5.0 2.0 1.0 0.5 dc 5.0 ms There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate I C − V CE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. 100 μs 500 μs 50 1.0 ms TJ = 200°C SECOND BREAKDOWN LIMITED BONDING WIRE LIMITED THERMALLY LIMITED @ TC = 25°C (SINGLE PULSE) CURVES APPLY BELOW RATED VCEO The data of Figure 5 is based on T J(pk) = 200_C; T C is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided T J(pk) v 200_C. T J(pk) may be calculated from the data in Figure 4. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 0.2 0.1 1.0 2N5684, 2N5686 2.0 3.0 20 30 50 70 100 5.0 7.0 10 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) Figure 5. Active−Region Safe Operating Area 4.0 t, TIME (s) μ 2.0 ts 5000 TJ = 25°C IB1 = IB2 IC/IB = 10 VCE = 30 V TJ = 25°C 3000 C, CAPACITANCE (pF) 2N5684 (PNP) 2N5686 (NPN) 3.0 2000 1.0 0.8 0.6 0.4 tf 700 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (AMP) 30 500 0.1 50 Figure 6. Turn−Off Time Cob Cib 1000 0.3 0.2 0.5 0.7 1.0 Cib 2N5684 (PNP) 2N5686 (NPN) 0.2 Cob 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitance http://onsemi.com 3 50 100 2N5684 2N5686 PNP 2N5684 NPN 2N5686 500 500 TJ = +150°C VCE = 2.0 V VCE = 10 V +25 °C 100 70 30 20 10 7.0 5.0 0.5 0.7 1.0 +25 °C 100 70 −55 °C 50 VCE = 2.0 V VCE = 10 V TJ = +150°C 300 200 hFE , DC CURRENT GAIN hFE , DC CURRENT GAIN 300 200 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (AMP) 30 50 −55 °C 30 20 10 7.0 5.0 0.5 0.7 1.0 50 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (AMP) 30 50 VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS) VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS) Figure 8. DC Current Gain 2.0 2.0 TJ = 25°C IC = 10 A 40 A 25 A IC = 10 A 25 A 40 A 1.2 1.2 0.8 0.8 0.4 0.4 0 TJ = 25°C 1.6 1.6 0.1 0.2 0.5 1.0 2.0 3.0 IB, BASE CURRENT (AMP) 5.0 10 0 0.1 0.2 0.3 0.5 1.0 2.0 3.0 IB, BASE CURRENT (AMP) 5.0 10 20 30 50 Figure 9. Collector Saturation Region 2.5 2.0 TJ = 25°C TJ = 25°C 1.6 V, VOLTAGE (VOLTS) V, VOLTAGE (VOLTS) 2.0 1.5 1.0 VBE(sat) @ IC/IB = 10 VBE @ VCE = 2.0 V 0.5 1.2 0.8 VBE(sat) @ IC/IB = 10 VBE @ VCE = 2.0 V 0.4 VCE(sat) @ IC/IB = 10 VCE(sat) @ IC/IB = 10 0 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 0 0.5 0.7 50 IC, COLLECTOR CURRENT (AMP) 1.0 2.0 3.0 5.0 10 IC, COLLECTOR CURRENT (AMP) Figure 10. “On” Voltages http://onsemi.com 4 2N5684 2N5686 PACKAGE DIMENSIONS CASE 197A−05 TO−204AE ISSUE J A N C E D −T− K 2 PL 0.30 (0.012) U V T Q M M Y M −Y− L 2 H NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE G B M T Y 1 −Q− 0.25 (0.010) M DIM A B C D E G H K L N Q U V INCHES MIN MAX 1.530 REF 0.990 1.050 0.250 0.335 0.057 0.063 0.060 0.070 0.430 BSC 0.215 BSC 0.440 0.480 0.665 BSC 0.760 0.830 0.151 0.165 1.187 BSC 0.131 0.188 STYLE 1: PIN 1. BASE 2. EMITTER CASE: COLLECTOR http://onsemi.com 5 MILLIMETERS MIN MAX 38.86 REF 25.15 26.67 6.35 8.51 1.45 1.60 1.53 1.77 10.92 BSC 5.46 BSC 11.18 12.19 16.89 BSC 19.31 21.08 3.84 4.19 30.15 BSC 3.33 4.77 2N5684 2N5686 Notes http://onsemi.com 6 2N5684 2N5686 Notes ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 7 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. 2N5684/D