Filename: tfs 620.doc Version 1.5 VI TELEFILTER 03.06.2005 Filter specification TFS 620 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: * Input: Output: 23 0 °C dBm 300 Ω || -4.9 pF 200 Ω || -6.7 pF Characteristics Remark: The reference level for the relative attenuation arel of the TFS 620 is the minimum of the pass band attenuation. This value is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed at 620 MHz without any tolerance. The values of relative attenuation arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value ae Insertion loss (reference level) 12,7 Nominal frequency (at 70°C) fN - Centre frequency (at ambient temperature) fC 620,6 31,3 Passband Pass band ripple ... fN fN fN fN + + fN 610 26,5 25,5 26,5 MHz MHz MHz MHz max. 14 620 MMHz MHz 0,5 dB 0,5 dB dB dB dB dB dB MHz min. fN ± 15 MHz 1 dB max. 1 dB min. min. min. min. 40 37 35 40 dB dB dB dB arel Relative attenuation fN dB tolerance / limit … … … … ± fN fN fN fN 15 + + 26,6 24 26,5 380 MHz MHz MHz MHz MHz 1.7:1 VSWR within fN ± 15 MHz 7 Phase ripple within PB (p-p) Operating temperature range OTR Storage temperature range Temperature coefficient of frequency 48 42 38 48 TCf max. deg max. 2:1 12 deg - + 65 °C ... + 75 °C - - 40 °C ... + 85 °C -20 ppm/K - Generated: Checked / Approved: Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 620.doc Version 1.5 VI TELEFILTER 03.06.2005 Filter specification TFS 620 2/5 0 79.46 -1 70.46 -20 -2 61.46 -30 -3 52.46 -40 -4 43.46 -5 34.46 -6 25.46 -70 -7 16.46 -80 -8 7.46 -90 -9 -1.54 -50 -60 -100 571.6 581.4 591.2 601 610.8 620.6 630.4 frequency in MHz 640.2 650 659.8 -10 601.6 669.6 605.4 609.2 613 616.8 620.6 624.4 frequency in MHz 628.2 632 635.8 phase in ° 0 -10 magnitude in dB magnitude in dB Filter characteristic -10.54 639.6 Construction and pin connection (All dimensions in mm) 7 5 620 ● T23 3 Date code: T U V ... Year + week 2005 2006 2007 1,1 5 7 0,1 1,1 120° 5 - 0,10 1,8 Max. 1 Ground Output RF Return Output Ground Ground Input RF Return Input Ground Date code 0,64 3 +0,15 1 1 2 3 4 5 6 7 8 2,54 50 Ohm Test circuit L1 7 3 L2 SAW C2 C1 1, 2, 4, 5, 6, 8 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 620.doc Version 1.5 VI TELEFILTER 03.06.2005 Filter specification TFS 620 3/5 Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: twice max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 – 3, with exeption of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters peer reel: reel of empty components at start: reel of empty components at start including leader: trailer: <MAXPIECESPERREEL> min. 300 mm min. 500 mm min. 300 mm Pull Off Direc tion P1 Tape (all dimensions in mm) W : 12,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 5,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 8,00 ± 0,1 D1(min) : 1,50 Ao : 5,30 ± 0,1 Bo : 5,30 ± 0,1 Ct : 9,5 ± 0,1 t P2 W G Ct Bo F G E Do Po PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 12,4 +2/-0 W2(max) : 18,4 N(min) : 50 C : 13,0 +0,5/-0,2 C A N W 1 The minimum bending radius is 45 mm. Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 620.doc Version 1.5 VI TELEFILTER 03.06.2005 Filter specification TFS 620 4/5 temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 620.doc VI TELEFILTER Version 1.5 Filter specification 03.06.2005 TFS 620 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification T. Martens 26.10.2004 1.1 - pinning added Chilla 29.10.2004 1.2 - changed insertion loss Chilla 02.11.2004 1.3 - changed pinning Chilla 30.11.2004 1.4 - changed stopband attenuation at fN +/- 25 MHz - changed insertion loss Chilla 07.02.2005 1.5 - created filter specification - added termination impedances - added typical values - changed relative attenuation - added filter characteristics - added test curciut Chilla 03.06.2005 Tele Filter GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.