28 Vdc MIL-COTS VIPAC Low Profile, Configurable Power Solution Features • DC input: 28 Vdc • Output voltages: 3.3 – 48 Vdc 40 – 400 W total 1, 2, or 3 outputs • Protective features: Inrush current limiting Input transient protection: – per MIL-STD-704E/F (M-FIAM5B) – per MIL-STD-704A/E/F & MIL-STD-1275A/B/D (M-FIAM9) EMI filtering per MIL-STD-461E • Local or remote control • Compliant to MIL-STD-810F for vibration (Method 514.5, Procedure I) and shock (Method 516.5, Procedure I) Module environmental stress screening • Package style: Low profile mounting options Optional finned heat sink Configurations 3 Micros (MVC-Axxx, MVX-Axxx) • Dual or triple output • 4.96" x 6.8" (126,0 x 172,7 mm) • Up to 300 W • 1.4 lbs (640 g) 2 Minis (MVC-Bxxx, MVX-Bxxx) • 4.96" x 6.8" (126,0 x 172,7 mm) • Single or dual output • Up to 400 W • 1.4 lbs (640 g) Product Highlights 1 Micro (MVC-Gxxx, MVX-Gxxx) • Single output • 3.15" x 6.8" (80,0 x 172,7 mm) • Up to 100 W The 28 Vdc MIL-COTS VIPAC family of power systems is a new class of userdefined, modular power solutions for the most demanding military applications. It incorporates preassembled and tested front ends (M-FIAM5B or M-FIAM9), Vicor Maxi, Mini and Micro series DC-DC converters (H or M-Grade), a choice of output connections and mechanical platforms. The 28 Vdc VIPAC can be specified with 1, 2 or 3 outputs with voltages as low as 3.3 Vdc to as high as 48 Vdc and power levels from 40 to 400 W per output. Additionally, the wide trim range of the modules can provide operating voltages from 500 mv to 52.8 V. The MIL VIPAC is available with an input of 28 Vdc in a variety of packages with profiles as low as 0.75". • 0.9 lbs (411 g) 2 Micros (MVC-Dxxx, MVX-Dxxx) • Single or dual output • 3.15" x 6.8" (80,0 x 172,7 mm) • Up to 200 W • 1.0 lbs (457 g) 1 Mini (MVC-Exxx, MVX-Exxx) • Single output • 3.15" x 6.8" (80,0 x 172,7 mm) • Up to 200 W • 1.0 lbs (457 g) 1 Maxi (MVC-Fxxx, MVX-Fxxx) • Single output • 3.15" x 9.15" (80,0 x 234,4 mm) • Up to 400 W For additional technical or design information; or to create a 28 Vdc VIPAC tailored to your specific requirements using Vicor’s online configurator, please visit vicorpower.com. • 1.3 lbs (594 g) Note: Weights are for coldplate versions • MVC-xxx refers to M-FIAM5B • MVX-xxx refers to M-FIAM9 28 Vdc MIL-COTS VIPAC Rev 2.3 vicorpower.com Page 1 of 6 12/2012 800 735.6200 MIL VIPAC GENERAL SPECIFICATIONS Typical at 25 °C, nominal line and load, unless otherwise specified. INPUT SPECIFICATIONS Parameter Min Typ Max Unit Notes Input voltage 18 28 36 Vdc Continuous 0.007 A/µF Transient immunity (M-FIAM5B) 50 Vdc 12.5 ms per MIL-STD-704E/F, continuous operation Test conditions AA and FF normal overvoltage transients per MIL-HDBK-704 Transient immunity (M-FIAM9) 100 250 70 50 Vdc Vdc Vdc Vdc 50 ms per MIL-STD-1275A/B/D, continuous operation 70 µs per MIL-STD-1275A/B/D, continuous operation 20 ms per MIL-STD-704A, continuous operation 12.5 ms per MIL-STD-704E/F, continuous operation Inrush limiting MIL-STD-461E EMI Conducted emissions CE101,CE102* Conducted susceptibility CS101, CS114, CS115, CS116 *CE102 compliant with loads in excess of 30% of rated output; loads below 30% may need additional input capacitance for compliance. ENVIrONMENTAl - SySTEM Parameter Dielectric withstand, input to chassis Operating chassis temperature H-Grade M-Grade Storage temperature H-Grade M-Grade Min Typ Max 1500/2121 Unit Notes Vrms/Vdc -40 95 °C -55 95 °C -55 125 °C -65 125 °C Shock MIL-STD-810F, Method 516.5, Procedure I 40 g for 15-23 ms, 75 g for 8-13 ms Vibration MIL-STD-810F, Method 514.5, Procedure I OUTPUT SPECIFICATIONS Parameter Min 20-2000 Hz at 5 g Typ Output voltage setpoint Max Unit ±1 % Vout nom Low line to high line; full load Line regulation ±0.02 ±0.2 % Temperature regulation ±0.002 ±0.005 %/°C Over temperature shutdown 115 Power sharing accuracy ±2 Programming range 10 Notes Over operating temperature range °C ±5 % 110 % Of nominal voltage. (For trimming below 90% of nominal, a minimum load of 10% rated power may be required) Current limit 115 % Iout max Output voltage 95% of nominal Short circuit current 115 % Iout max Output voltage <250 mV 28 Vdc MIL-COTS VIPAC Rev 2.3 vicorpower.com Page 2 of 6 12/2012 800 735.6200 MIL VIPAC SPECIFIC SPECIFICATIONS ENVIrONMENTAl - MODUlES Altitude MIL-STD-810C, Method 500.2, Procedure I & II, 40,000 ft. and 70,000 ft. Operational. Explosive Atmosphere MIL-STD-810F, Method 511.4, Procedure I, Operational. Vibration MIL-STD-810F, Method 514.5, Procedure I, Category 14, Sine and Random vibration per Table 514.5C for Helicopter AH-6J Main Rotor with overall level of 5.6 grams for 4 hours per axis. MIL-STD-810F, Method 514.5C, General Minimum Integrity Curve per Figure 514.5C-17 with overall level of 7.7 grams for 1 hour per axis. Shock MIL-STD-810-F, Method 516.5, Procedure I, Functional Shock, 40 G's. MIL-S-901D, Lightweight Hammer Shock, 3 impacts/axis, 1,3,5 ft. MIL-STD-202F, Method 213B, 60 G's, 9ms half sine. MIL-STD-202F, Method 213B, 75 G's, 11ms Saw Tooth Shock. Acceleration MIL-STD-810F, Method 513.5, Procedure II, Table 513.5-II, Operational, 2-7 G's, 6 directions. Humidity MIL-STD-810F, Method 507.4, Procedure I, Cycle I, 240 hrs, 95% RH. Solder Test MIL-STD-202F, Method 208, 8 hour aging. MIl-COTS 28 Vdc VIPAC OUTPUT POWEr OPTIONS (Output power based on 28 Vdc nominal input voltage) VIPAC Configuration Power (W) No. of Outputs 3.3 V 5V 12 V 15 V 24 V 28 V 48 V Total 2 Single Single // 75 150 75 100 200 100 75 200 100 100 100 100 200 400 200 200 400 100 200 100 100 200 100 100 100 100 200 400 200 200 400 100 200 100 100 200 100 100 100 100 200 400 200 200 400 100 200 100 100 200 100 100 100 100 200 400 200 200 400 100 200 100 100 200 100 100 100 100 200 400 200 200 400 100 200 100 100 200 100 100 100 100 200 400 200 200 400 100 200 200 100 300 Single micro1 Dual micro1 Dual Dual Triple micro1 Triple Single mini1 Dual mini1 Maxi1 Single Single // Dual Single 150 75 75 75 75 150 300 150 150 264 300 200 400 400 400 // = parallel 1 Lower power modules available – consult website for more information. 2 Derate outpower per chart below. Derate @ 16 W/V Below 25 Vin Output Power (W) 400 Safe Operating Area 288 Transient ~ ~ 0 10 20 18 30 25 40 36 60 50 Input Voltage (V) 28 Vdc MIL-COTS VIPAC Rev 2.3 vicorpower.com Page 3 of 6 12/2012 800 735.6200 Vin 28 V MIL-COTS VIPAC Derating Curve MIL VIPAC SPECIFIC SPECIFICATIONS (CONT.) MICrO MODUlES Parameter 3.3 V 5V 12 V 15 V 24 V 28 V 48 V Unit Efficiency (typ) 79 84 85.8 89 88 89 87.7 % Ripple & noise, p-p (typ) 140 100 209 100 70 85 100 mV Output power 75 100 100 100 100 100 100 Watts 95 °C Chassis Output OVP setpoint 4.3 6.25 14.3 17.8 28.1 32.7 55.7 Volts Recycle input volt. to restart (1 m off) 4 3.2 4.4 4.6 3.6 3.3 3 Watts No load 0.02 0.02 0.02 0.02 0.02 0.02 0.02 ±%Vout 3.3 V 5V 12 V 15 V 24 V 28 V 48 V Unit Efficiency (typ) 79 82.5 86 86.6 87 87 87.5 % Ripple & noise, p-p (typ) 100 95 360 250 260 180 225 mV Output power 150 200 200 200 200 200 200 Watts 95 °C Chassis Output OVP setpoint 4.3 6.3 14.4 17.8 28.5 32.8 55.8 Volts Recycle input volt. to restart (1 m off) 5 5.1 4.6 3.4 5.1 4.5 5.4 Watts No load 0.02 0.02 0.02 0.02 0.02 0.02 0.02 ±%Vout Parameter 3.3 V 5V 12 V 15 V 24 V 28 V 48 V Unit Efficiency (typ) 78.5 82 86.8 87.5 88.5 87.8 86.7 % Ripple & noise, p-p (typ) 75 152 70 60 80 172 58 mV Output power 264 400 400 400 400 400 400 Watts 95 °C Chassis Output OVP setpoint 4.3 6.25 14.3 17.8 28.1 32.7 55.8 Volts Recycle input volt. to restart (1 m off) 8 6.8 6.8 6.3 11 6.3 11.8 Watts No load 0.02 0.02 0.02 0.02 0.02 0.02 0.02 ±%Vout Dissipation, standby (typ) Load reg. (max) Notes 20 MHz bandwidth No load to full load Note: 50 W Micro models are now available. MINI MODUlES Parameter Dissipation, standby (typ) Load reg. (max) MAXI MODUlES Dissipation, standby (typ) Load reg. (max) Note: 300 W (200 W @ 3.3V) Maxi models are also available. 28 Vdc MIL-COTS VIPAC Rev 2.3 vicorpower.com Page 4 of 6 12/2012 800 735.6200 Notes 20 MHz bandwidth No load to full load Notes 20 MHz bandwidth No load to full load MECHANICAL DRAWINGS Configuration MVC-A / MVX-A LugMates Configuration MVC-B / MVX-B LugMates Configuration MVC-D / MVX-D LugMates Configuration MVC-E / MVX-E LugMates Configuration MVC-F / MVX-F LugMates Configuration MVC-G / MVX-G LugMates HEAT SINK OPTIONS 1.37 (34,8) 0.81 (20,6) 0.50 (12,7) 0.56 0.75 (14,2) (19,1) 1.31 (33,3) 0.08 (2,0) 0.22 (5,6) Coldplate 1.87 (47,5) 1.00 (25,4) 0.32 (8,1) 0.5” Fin Option 28 Vdc MIL-COTS VIPAC Rev 2.3 vicorpower.com Page 5 of 6 12/2012 800 735.6200 1” Fin Option Fin spacing and relief are the same for both Fin options Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom power systems. Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves the right to make changes to any products, specifications, and product descriptions at any time without notice. Information published by Vicor has been checked and is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies. Testing and other quality controls are used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. Specifications are subject to change without notice. Vicor’s Standard Terms and Conditions All sales are subject to Vicor’s Standard Terms and Conditions of Sale, which are available on Vicor’s webpage or upon request. Product Warranty In Vicor’s standard terms and conditions of sale, Vicor warrants that its products are free from non-conformity to its Standard Specifications (the “Express Limited Warranty”). This warranty is extended only to the original Buyer for the period expiring two (2) years after the date of shipment and is not transferable. UNLESS OTHERWISE EXPRESSLY STATED IN A WRITTEN SALES AGREEMENT SIGNED BY A DULY AUTHORIZED VICOR SIGNATORY, VICOR DISCLAIMS ALL REPRESENTATIONS, LIABILITIES, AND WARRANTIES OF ANY KIND (WHETHER ARISING BY IMPLICATION OR BY OPERATION OF LAW) WITH RESPECT TO THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT, OR ANY OTHER MATTER. This warranty does not extend to products subjected to misuse, accident, or improper application, maintenance, or storage. Vicor shall not be liable for collateral or consequential damage. Vicor disclaims any and all liability arising out of the application or use of any product or circuit and assumes no liability for applications assistance or buyer product design. Buyers are responsible for their products and applications using Vicor products and components. Prior to using or distributing any products that include Vicor components, buyers should provide adequate design, testing and operating safeguards. Vicor will repair or replace defective products in accordance with its own best judgment. For service under this warranty, the buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the product to the factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty. Life Support Policy VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used herein, life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms and Conditions of Sale, the user of Vicor products and components in life support applications assumes all risks of such use and indemnifies Vicor against all liability and damages. Intellectual Property Notice Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the products described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Interested parties should contact Vicor's Intellectual Property Department. Vicor Corporation 25 Frontage Road Andover, MA, USA 01810 Tel: 800-735-6200 Fax: 978-475-6715 email Customer Service: [email protected] Technical Support: [email protected] 28 Vdc MIL-COTS VIPAC Rev 2.3 vicorpower.com Page 6 of 6 12/2012 800 735.6200