® JUPITER Model JM4 MAGNETOSTRICTIVE LEVEL TRANSMITTER HOW A Versatile, High-Performance Level Measurement Solution MAGNETOSTRICTION The Jupiter™ Model JM4 magnetostrictive transmitter can solve challenging level applications in a variety of ways. With its magnetic-based operating principle, Jupiter can be directly inserted into the top of a vessel via an assortment of connection types, or mounted on the outside of a magnetic level indicator (MLI). WORKS 1 1 LOW-VOLTAGE PULSE On-board electronics send a low-voltage electrical pulse down the magnetostrictive wire at the speed of light, ten times per second. STILLING WELL DUAL-LEVEL MEASUREMENT CUSTOM FLOAT DESIGN JUPITER™ ON ATLAS TOP MOUNT MLI 2 4 MAGNETS Magnets contained within the float focus their energy toward the wire at the precise location of the liquid level. 3 3 2 1 DIRECT INSERTION TWIST Interaction between the magnetic field, electrical pulse, and magnetostrictive wire cause a slight mechanical disturbance in the wire that travels back up the probe at the speed of sound. JUPITER™ MOUNTED ON MLI JUPITER™ IN EXTERNAL CHAMBER 4 PIEZOELECTRIC CRYSTALS The mechanical wave is converted back into electrical energy by two piezoelectric crystals. The on-board electronics interpret the time-of-flight data and indicate the position of the float magnets. 2 ±0.05” HIGH ACCURACY MEASUREMENT In an era of technologically advanced “smart” instruments, plants and operators are investing and placing more reliance in device networks which deliver reliable level measurement with a high degree of accuracy. The Jupiter magnetostrictive level transmitter is capable of measuring with an impressive accuracy of ±0.05 inches (1.3 mm), allowing facilities tighter level tolerances, optimizing their process operations and generating greater ROI. SAFER In addition, such features as non-volatile event history information, hot swappable control modules, configurable alarm delays and context sensitive help screens and parameters makes this one of the easiest transmitters on the market to work with. 2 3 A first among magnetostrictive devices, Jupiter revolutionizes installation options and flexibility with a transmitter head which can rotate up to 310 degrees, drastically improving LCD visibility and access to the user interface in hard-to-reach places. In addition, a removable head minimizes installation challenges, permits interchangeability without breaching the process seal, and allows for remote transmitter placement. SIMPLER Jupiter possesses a comprehensive array of advanced diagnostics and real-time performance monitoring which make gathering transmitter insight faster and easier than ever before. With profound focus on SIS (Safety Instrumented Systems), Jupiter was developed with SSA (Safety Suitable Architecture), as well as memory protection hardware & software. FEATURES REMOVABLE & ROTATABLE TRANSMITTER HEAD 1.3mm With the goal of simplifying interaction with the transmitter, Jupiter was designed with the user in mind: • User-friendly local push-button interface allows for easier and more intuitive navigation • Bottom-mount option improves accessibility for many MLI installations • 310° head rotation enhances line-of-sight to the display • Advanced EDDL and DTM capability make remote interaction with Jupiter very effective for configuration and diagnostic purposes SMARTER Orion introduces auto-configuration to magnetostrictive technology with Jupiter’s new Smart Probe. When the transmitter head connects to a probe for the first time, configuration settings stored within the probe’s memory are instantly transferred. In addition, parameters critical to the instrument’s calibration are transferred as well, eliminating the need for Jupiter to be manually calibrated in the field. This unique capability expedites the setup process and simplifies the task of installing spare transmitter heads on existing or replacement probes. REMOTE MOUNT OPTION IDEAL FOR INSTALLATION SPACE CONSTRAINTS 45° ANGLED ENCLOSURE CONVENIENT VISIBILITY & ACCESSIBILITY 4 BUOYANCY A VERSATILE SOLUTION FOR A VARIETY OF APPLICATION CHALLENGES Buoyancy-based technologies have been utilized in the process instrumentation world for generations and are widely considered to provide reliable, accurate level measurement in an extensive range of applications and service conditions. A SIMPLE, FEATURE-RICH USER INTERFACE Jupiter capitalizes on the benefits of buoyancy such as ease of installation, minimized configuration, ability to check calibration either by moving the float or utilizing an external magnetic field, customization of float size/shape/ materials, and high pressures. With the amazing accuracy of Jupiter, cost-toaccuracy ratio exceeds virtually any other comparable technology. Jupiter™ takes the user experience to new levels of convenience and functionality with an information-rich display and an easy-to-navigate menu. With the new graphic LCD, waveforms are viewable locally at the device. You can also interface with Jupiter via a capable DCS or handheld communicator that utilize DDs/EDDL for remote connectivity. A fully redesigned and upgraded DTM puts real-time and historical trend data at your fingertips. With a basic laptop, a HART modem, and the free-to-download program PACTware™, the transmitter can be accessed locally or from anywhere in the loop. You can also capture live waveforms, which are invaluable when configuring the transmitter for optimal performance. . OPTIONS Sun Shade 5 Interface & Emulsions Foaming Media Buildup Given the long and successful use of buoyancy based devices in the process world, the synergistic combination of Jupiter’s buoyancy with 4th generation electronics is the starting point for superior performance in interface applications. With precise weighting of the float to customer specifications, emulsion layers pose no problem since the float will sink all the way to the lower liquid layer. Even mild to moderate fluctuations in media specific gravity will have limited impact on float position creating greater reliability and less chance for complete loss of signal with other strictly electronic measurements. Foam can be a surprising and unwelcome process condition to many applications. Unlike many other electronic level technologies, Magnetostriction, with its float-based principle, is not as vulnerable to signal loss given the known or unexpected presence of foam. Since the float is intended to operate in much denser media, the foam will not inhibit or restrict the float from finding its correct equilibrium. Many applications which are prone to increase the risk of coating and buildup can hinder the effectiveness of level measurement. Magnetostrictive floats can be sized to achieve substantial buoyancy force, overcoming the added resistance. Floats and chambers can also be coated in a variety of low-friction polymers to reduce the adhesion coefficient making certain processes and media suitable for Jupiter. In addition, given the customizable nature of magnetostrictive floats, accommodations can be made for additional safety gap margins between the float and the transmitter probe to allow for extra clearance. • Reduces glare and radiant heating of the transmitter enclosure. Also minimizes impact of direct solar radiation to the graphic liquid crystal display. Vibration Kit Centering Disc (direct insertion model) • Silicone-based damping material eliminates metal-on-metal contact between the probe and the chamber • Increases signal stability in high vibration applications by reducing mechanical noise. • The centering disk is an invaluable aid when utilizing the Jupiter in a direct insertion environment, such as a stilling well or modular instrumentation bridle (MIB). By keeping the transmitter probe centered in the MIB, potential for impingement is mitigated. 6 JUPITER MODEL JM4 LEVEL TRANSMITTER | SPECIFICATIONS System Design Performance Magnetostriction-based mechanical response signal Measurement Principle Input Linearity 0.030 in. (8 mm) or 0.01% of probe length, whichever is greater Accuracy ±0.01% full scale or ±0.05 in (1.3 mm), whichever is greater Measured Variable Level, response signal time of flight Resolution .014” (.4 mm) Span 6 inches to 400 inches (15 cm to 999 cm) Repeatability ±0.005% of full span or 0.014 in, whichever is greater Response Time 1 second 4 to 20 mA with HART: 3.8 mA to 20.5 mA usable (per NAMUR NE43) Initialization Time Less than 10 seconds Foundation fieldbus : H1 (ITK Ver. 6.1.1) Ambient Temperature Effect Approx. ±0.02% of probe length/degree C 0.003 mA Execution Time 15 msec (30 msec PID, Signal Characterizer Block) Output Type TM Resolution Analog: Digital Display: 1 mm Loop Resistance 591 ohms @ 24 VDC and 22 mA Diagnostic Alarm Selectable: 3.6 mA, 22 mA (meets requirements of NAMUR NE 43), or HOLD last output Damping Adjustable 0-10 seconds User Interface Keypad 4-button menu-driven data entry Display Graphic liquid crystal display with viewable echo curve Digital Communication HART Version 7—with Field Communicator, Foundation fieldbusTM, DTM (PACTwareTM), AMS, FDT, EDDL Menu Languages ITK Version 6.1.1 H1 Device Class Link Master (LAS)—selectable ON/OFF H1 Profile Class 31PS, 32L Function Blocks (6) Al, (2) Transducer, (1) Resource, (1) Arithmetic, (1) Input Selector, (1) Signal Characterizer, (2) PID, (1) Integrator Quiescent Current 15 mA Execution Time 15 msec (30 msec PID, Signal Characterizer Block) Transmitter LCD: English, French, German, Spanish, Russian, Portuguese HART DD: English, French, German, Spanish, Russian, Chinese, Portuguese Foundation fieldbus Power (at transmitter terminals) Foundation fieldbusTM TM Host System: English Environment Ambient Temperature Range Transmitter: Display: HART: General Purpose (Weather proof)/Intrinsically Safe/Explosion-proof: 16 to 36 VDC 11 VDC minimum under certain conditions (refer to IO manual section 2.5.5) -50° to +185°F (-45°C to +85°C) FOUNDATION fieldbus™: FISCO 9 to 17.5 VDC Process Pressure (Direct Insertion) Vacuum to 3000 psig (207bar) FISCO, FNICO, Explosion Proof, General Purpose (Weather Proof): 9 to 32 VDC Humidity 0 to 99%, non-condensing Electromagnetic Compatibility Meets CE requirement (EN 61326) and NAMUR NE 21 1136 Ω R Loop Material IP67/die cast aluminum A413 (<0.6% copper); optional 316 stainless steel Surge Protection Meets CE EN 61326 (1000V) 591 Ω Net/Gross Weight Aluminum: 4.5 lbs. (2.0 kg) Shock/Vibration ANSI/ISA-S71.03 Class SA1 (Shock); ANSI/ISA-S71.03Class VC2 (Vibration) 360 Ω Stainless Steel: 10.0 lbs. (4.50 kg) Overall Dimensions Transmitter Head: H 8.34” (212 mm) x W 4.03” (102 mm) x D 7.56” (192 mm) Cable Entry 1/2” NPT or M20 PROCESS CONDITIONS SIL 2 Hardware (Safety Integrity Level) Safe Failure Fraction = 93.1% for Single Float version, 91.9% for Dual Float version (HART only) Process Temperature Functional Safety to SIL 2 as 1oo1 in accordance with IEC 61508 (Full FMEDA report available upon request) 7 -5° to +176°F (-20°C to +80°C) Storage Temperature Housing Safe Operating Area -40° to +176°F (-40°C to +80°C) Process Pressure External Mount: -320°F (-196°C) to +850°F (450°C) Direct Insertion: -320°F (-196°C) to 800°F (425°C) Direct Insertion: Vacuum to 3000 psig (207bar) Digital Solar Mode 0 Typical HART 4-20 mA Operating Area 16.25 V 18.9 V 24 V 36 V Vsupply (Loop Supply Voltage) 8 JUPITER JM4 MODEL NUMBER | TRANSMITTER HEAD PHYSICAL DIMENSIONS J M 4 DIRECT INSERTION 1 EXTERNAL MOUNT A E B F 3 3 3 3 2 2 2 2 9 9 9 9 6 6 6 6 3 3 1 1 ft. ft. 9 9 9 9 6 6 6 6 3in. 3in. 3in. 3in. 0 0 0 ft. ft. 5 6 7 8 9 10 9 HOUSING 1 4-20 mA with HART 1 Aluminum, Dual-Compartment 2 Foundation Fieldbus Communications 2 316 SS, Dual-Compartment 6 SAFETY OPTIONS ft. 4 C ft. ft. D C ft. E 0 dashed line represents cryogenic insulation 21.00 [533] 3 5 SIGNAL OUTPUT D 17.00 [432] 2 5 0 None 1 SIL 2 Hardware 10 CONDUIT CONNECTION & SUNSHADE OPTION required for FOUNDATION fieldbus™ SEE NOTE 1 7 ACCESSORIES/MOUNTING 0 No Digital Display and Keypad- Integral 1 No Digital Display and Keypad - Remote 36” (0.91m) SEE NOTE 2 2 No Digital Display and Keypad - Remote 144” (3.6m) SEE NOTE 2 A Digital Display and Keypad - Integral B Digital Display and Keypad - Remote 36” (0.91m) SEE NOTE 2 C Digital Display and Keypad - Remote 144” (3.6m) SEE NOTE 2 0 1/2” NPT 1 M20 2 1/2” NPT with Sunshade 3 M20 with Sunshade Transmitter Head Dimensions 3.97 3.39 4.18 [101] [86] [106] 3.78 8 AREA CLASSIFICATION F 19.00 [483] 23.00 [584] Dimensions inches [mm] Configuration Top Mount A = 16.4 [417] Top Mount Hi-Temp/Cryogenic B = 20.4 [518] Offset Mount 9 General Purpose, Weatherproof (IP 67) 1 Intrinsically Safe / FISCO (cFMus) 3 Explosion-Proof / FNICO (cFMus) A Intrinsically Safe (ATEX & IEC) B Flame-Proof (ATEX & IEC) approvals pending -- inquire for availability C Ex n (ATEX & IEC) D Dust Ex (ATEX & IEC) 1 FISCO Field Device (cFMus) 3 Explosion-Proof & FNICO Field Device (cFMus) [96] 10.05 [255] 45° 8.35 5.10 NOTES: C = 8 [203] D = 12.7 [323] E = 16.6 [422] F = 16.5 [419] 1 Cryogenic Offset Mount 0 2 Inches [mm] [212] [130] 3rd Party FMEDA report available Remote-mount transmitter not available with XP / Flame Proof approvals 10 JUPITER JM4 MODEL NUMBER | EXTERNAL MOUNT PROBE 2 1 2 3 4 5 6 7 8 0 9 10 0 0 11 12 13 14 2 15 1 2 MEASUREMENT SYSTEM A English C Metric 3 CONFIGURATION F STANDARD Top Mount Offset H STANDARD Bottom Mount Offset K HIGH-TEMP Top Mount L HIGH-TEMP Top Mount Offset M HIGH-TEMP Bottom Mount Offset R CRYOGENIC Top Mount S CRYOGENIC Top Mount Offset T CRYOGENIC Bottom Mount Offset suitable for process temperatures -40° F to +500° F (-40° C to +260° C) Left-Side MLI Mount 01 Right-side MLI Mount suitable for process temperatures +501° F to +850° F (+261° C to +454° C) suitable for process temperatures -320° F to +150° F (-196° C to +66° C) Left side mount (standard) Right side mount 316 SS Sensor Enclosure with 316 SS Probe None V Vibration-resistant probe mounting Cryogenic Offset (316 SS only) 1 N 7 8 9 10 11 12 13 14 15 2” (or if digit 20 of MLI model code is 1, 2, or 7) 2 2 1/2” or if digit 20 of MLI model code is 3, 4, 5, or 6) 3 3” (or if digit 20 of MLI model code is A, B, C, or D) 4 4” (or if digit 20 of MLI model code is E, F, G, H, or J) 5 3/4” (for Atlas Top Mount Configuration only) 0 None. No mounting clamps required. E 2” (or if digit 20 of MLI model code is 1, 2, or 7) F 2 1/2” or if digit 20 of MLI model code is 3, 4, 5, or 6) G 3” (or if digit 20 of MLI model code is A, B, C, or D) H 4” (or if digit 20 of MLI model code is E, F, G, H, or J) J 3/4” (for Atlas Top Mount Configuration only) 0 None. No mounting clamps required. FLOAT Probe mounting positions on Atlas™, Vector™, and Gemini™ Magnetic Level Indicators Probe mounting positions on Aurora® MLI Probe proximity to the float is critical None 10 LEVEL/INTERFACE MEASUREMENT PREFERENCE Offset (Aluminum or 316 SS) Powder-Coated Aluminum Sensor Enclosure with 316 SS Probe SEE NOTE1 7 PROBE OPTIONS 1 0 Top Mount (316 SS only) A Only available with Digit 3, Options F, H, L, M 6 9 UNUSED 6 PROBE MATERIAL OF CONSTRUCTION 1 5 Select these options if chamber DOES contain high-temp insulation 4&5 MOUNTING SIDE 00 4 Select these options if chamber DOES NOT contain high-temp insulation Probe length to be provided in centimeters STANDARD Top Mount 3 0 0 8 CHAMBER SIZE (FOR MOUNTING HARDWARE) Probe length to be provided in inches E 2 0 Sensor Enclosures (shaded) refer to Model Code digit 6 1 Measure Only the Total Liquid Level 2 Measure Only the Interface Level 3 Measure Both Total and Interface Level 11,12 UNUSED 00 None 13-15 PROBE LENGTH Specify required insertion length. See right. Example: 87 inches = 087 XXX Code 2 must be "A" Example: 120 centimeters = 120 Code 2 must be “C” Top/Bottom Mount Offset Configuration Top Mount Configuration Probe Length = Center-to-Center + 6 in. (15 cm) Probe Length = Center-to-Center + 8 in. (20 cm) Note: Maximum Probe Length = 400 inches (999 cm) 11 12 JUPITER JM4 MODEL NUMBER | DIRECT INSERTION PROBE 2 1 2 3 4 5 6 N 7 8 9 10 11 12 13 14 2 15 1 2 MEASUREMENT SYSTEM A English C Metric probe length to be provided in centimeters Probes designed for high-temp and cryogenic process temperatures contain an extended neck to reduce thermal stress on critical probe components. 3 CONFIGURATION Standard 2 High-Temperature 8 Cryogenic suitable for process temperatures between -40° F to +500° F (-40° C to +260° C) Be aware of overhead clearance at the desired installation location. suitable for process temperatures between +501° F to +800° F (+261° C to +425° C) 4 5 6 7 8 9 10 11 12 13 14 15 316 SS B Hastelloy® C276 C Monel® 400 L 316 SS w/Teflon®-S coating on probe tubing and float P 316 SS w/PFA coating on probe tubing and float 7 UNUSED THREADED (MALE) 3/4” NPT 22 1” BSP 41 2” NPT 42 2” BSP None 8 INSTALLATION CONSIDERATIONS 4&5 PROCESS CONNECTION SIZE & TYPE (Select from below) 11 Standard ANSI FLANGES N Direct Insertion unit mounted in vessel without stilling well. C Direct Insertion unit mounted in chamber, bridle, or stilling well. 0 Industrial Grade K ASME B31.1 2” 150# Raised Face 53 3” 150# Raised Face 63 4” 150# Raised Face L ASME B31.3 44 2” 300# Raised Face 54 3” 300# Raised Face 64 4” 300# Raised Face M ASME B31.3 & NACE MR0103/MR0175 45 2” 600# Raised Face 55 3” 600# Raised Face 65 4” 600# Raised Face N Industrial Grade & NACE MR0103/MR0175 47 2” 900/1500# Raised Face 56 3” 900# Raised Face 66 4” 900# Raised Face 57 3” 1500# Raised Face 67 4” 1500# Raised Face DN 80 : PN 16 Type A FA DN 100 : PN 16 Type A CC DN 40 : PN 63/100 Type B2 EB DN 80 : PN 25/40 Type A FB DN 100 : PN 25/40 Type A DA DN 50 : PN 16 Type A ED DN 80 : PN 63 Type B2 FD DN 100 : PN 63 Type B2 DB DN 50 : PN 25/40 Type A EE DN 80 : PN 100 Type B2 FE DN 100 : PN 100 Type B2 DD DN 50 : PN 63 Type B2 FF DN 100 : PN 160 Type B2 DE DN 50 : PN 100 Type B2 FG DN 100 : PN 250 Type B2 Note: Maximum Probe Length = 400 inches (999 cm) 10 LEVEL/INTERFACE MEASUREMENT PREFERENCE EN 1092-1 FLANGES EA Specify required insertion length. See figures to the right. XXX Example: 87 inches = 087 Code 2 must be "A" Example: 120 centimeters = 120 Code 2 must be “C” 9 CONSTRUCTION CODE 43 DN 40 : PN 16/25/40 Type A See next page for our standard direct insertion float offerings. If a listed float does not meet your application requirements, consult factory for a custom design. High-Temp & Cryogenic Models CB 11&12 MAGNETIC FLOAT(S) 13-15 PROBE LENGTH Dimensions can be found on page 9 suitable for process temperatures between -320° F to +150° F (-196° C to +66° C) A N 13 3 6 MATERIAL OF CONSTRUCTION wetted materials only probe length to be provided in inches 1 2 N 1 Measure Only the Total Liquid Level 2 Measure Only the Interface Level 3 Measure Both Total and Interface Level Units mounted in stilling wells or chambers are provided with centering discs at the base of the probe Threaded Flanged 14 JUPITER JM4 MODEL NUMBER | DIRECT INSERTION FLOAT SELECTION Direct Insertion Total Level Float (uppermost liquid layer) Float Dimensions Minimum Liquid Specific Gravity 316/316L SS Titanium Hastelloy® C Hygienic Service 316/316L SS SF1: 20 µin (0.51 µm) Hygienic Service 316/316L SS SF4: 15 µin (0.38 µm) ≥ 0.86 AA 2.0" (51 mm) dia. BA 2.0" (51 mm) dia. CA 1.85" (47 mm) dia. DA 2.0" (51 mm) dia. AA 2.0" (51 mm) dia. BA 2.0" (51 mm) dia. CB 2.25" (57 mm) dia. ≥ 0.7 AB 2.3" (58 mm) dia. BA 2.0" (51 mm) dia. ≥ 0.68 AB 2.3" (58 mm) dia. ≥ 0.64 AC 2.5" (64 mm) dia. ≥ 0.83 Float Code Dim. A in. (mm) Dim. B in. (mm) Dim. C in. (mm) FA 2.0" (51 mm) dia. AA,DA,FA 2.0 (51) 2.7 (69) 1.84 (47) AB,DB,FB 2.3 (58) 3.0 (76) 2.0 (51) DA 2.0" (51 mm) dia. FA 2.0" (51 mm) dia. AC,DC,FC 2.5 (64) 3.0 (76) 2.14 (54) BA 2.0 (51) 2.8 (71) 1.98 (50) CB 2.25" (57 mm) dia. DB 2.3" (58 mm) dia. FB 2.3" (58 mm) dia. BB 2.25 (57) 3.0 (76) CA 1.85 (47) BB 2.25" (57 mm) dia. 99 consult factory DB 2.3" (58 mm) dia. FB 2.3" (58 mm) dia. CB BB 2.25" (57 mm) dia. 99 consult factory DC 2.5" (64 mm) dia. FC 2.5" (64 mm) dia. ≥ 0.52 99 consult factory dia. BB 2.25"(57 mm) dia. 99 consult factory 99 consult factory dia. 99 consult factory dia. < 0.52 99 consult factory 99 consult factory 99 consult factory 99 consult factory 99 consult factory Reference the chart below to identify an appropriate chamber or stilling well size for your application. Adequate clearance is recommended to ensure proper float operation. Sizing Chart for Chambers & Stilling Wells Float Diameter Probe Lengths > 144 in (366 cm) Probe Lengths ≤ 144 inches (366 cm) inches (mm) 3" sch. 5/10 3" sch. 40 4" sch. 5/10 4" sch. 40 4" sch. 80 4" sch. 160 4" sch. 10 4" sch. 40 2.08 (53) 1.85 (47) 3.0 (76) 2.06 (52) 2 (51) 2.25 (57) 4.3 (109) 3.01 (76) 2.3 (58) MA,QA,RA 2.0 (51) 2.7 (69) 1.35 (34) 2.5 (64) MB,QB,RB 2.0 (51) 2.7 (69) 1.35 (34) 3 (76) NA 2.0 (51) 2.8 (71) 1.4 (36) NB 2.0 (51) 2.8 (71) 1.4 (36) PA 1.85 (47) 3.0 (76) 1.5 (38) PB 1.85 (47) 3.0 (76) 1.5 (38) Temp ºF (ºC) Pressure Rating (includes 1.5x safety factor) psig (bar) AA, AB, AC, MA, MB DA, DB, DC, QA, BA, NA, NB QB FA, FB, FC, RA, RB Direct Insertion Interface Level Float (lower or middle liquid layer) Minimum Liquid Specific Gravities upper / lower sinks thru ≤ 0.89 floats on / sinks thru ≤ 1.00 ≥ 1.00 floats on / ≥ 1.12 316/316L SS Titanium Hastelloy® C Hygienic Service 316/316L SS SF1: 20 µin (0.51 µin) Hygienic Service 316/316L SS SF4: 15 µin (0.38 µin) MA 2.0" (51 mm) dia. NA 2.0" (51 mm) dia. PA 1.85" (47 mm) dia. QA 2.0" (51 mm) dia. RA 2.0" (51 mm) dia. MB 2.0" (51 mm) dia. NB 2.0" (51 mm) dia. PB 1.85" (47 mm) dia. QB 2.0" (51 mm) dia. RB 2.0" (51 mm) dia. DIM. "B" HEIGHT Two Floats for Total Level and Interface Measurement Code 11 12 13 21 22 23 31 15 Total AA AB AC AA AB AC BA Interface MA MB NA Code 32 41 42 51 52 61 62 DIM "A" DIAMETER Total BB BA BB CA CB CA CB Interface NA NB PA PB When utilizing two floats to measure total and interface liquid levels, reference the chart on the left to determine the appropriate float code to insert into the Jupiter model number. If the desired combination is not shown, consult your local sales representative or Orion to inquire about a custom float deisgn. DIM. "C" MAGNET LOCATION (Submergence Depth) BB CA, PA, PB CB 70 (20) 440 (30.3) 750 (51.7) 400 (27.6) 340 (23.4) 320 (22.1) 100 (40) 440 (30.3) 709 (48.9) 378 (26.1) 340 (23.4) 320 (22.1) 200 (95) 440 (30.3) 559 (38.5) 298 (20.6) 340 (23.4) 320 (22.1) 250 (120) 427 (29.4) 494 (34.0) 263 (18.2) 340 (23.4) 320 (22.1) 300 (150) 411 (28.4) 437 (30.1) 233 (16.1) 340 (23.4) 320 (22.1) 350 (175) 433 (29.9) 386 (26.6) 206 (14.2) 340 (23.4) 320 (22.1) 400 (200) 427 (29.4) 341 (23.5) 182 (12.6) 340 (23.4) 320 (22.1) 450 (230) 411 (28.4) 303 (20.9) 162 (11.1) 337 (23.2) 318 (21.9) 500 (260) 396 (27.3) 273 (18.8) 146 (10.0) 335 (23.1) 315 (21.7) 550 (290) 385 (26.5) 250 (17.2) 133 (9.2) 326 (22.5) 306 (21.1) 600 (315) 374 (25.8) 232 (16.0) 124 (8.5) 316 (21.8) 298 (20.5) 650 (345) 367 (25.3) 217 (14.9) 116 (8.0) 308 (21.2) 289 (19.9) 700 (370) 361 (24.9) 205 (14.1) 109 (7.5) 299 (20.6) 281 (19.4) 750 (400) 356 (24.6) 192 (13.2) 102 (7.1) 296 (20.4) 278 (19.2) 800 (425) 352 (24.3) 177 (12.2) 94 (6.5) 293 (20.2) 276 (19.0) 16 HAZARDOUS LOCATION APPROVALS Agency Protection Method Area Classification Explosion Proof Class I, Div 1, Group B, C and D, T4 Ta = -40ºC to +70ºC Type 4X, IP67 Class I, II, III, Div 1, Group A, B, C, D, E, F, G, T4 Class I, Zone 0 AEx ia IIC T4 Ga Class I, Zone 0 Ex ia IIC T4 Ga Ta =-40ºC to + 70ºC Type 4X, IP67 U.S.: Class I, II, III, Division 2, Group A, B, C, D, E, F, G, T4, Ta = -40ºC to 70ºC CANADA: Class I, Division 2, Group A,B,C,D T4, Ta = -40ºC to 70ºC Class I, Zone 2 AEx nA IIC T4 Gc Ta = -15ºC to 70ºC Class I, Zone 2 Ex nA IIC T4 Gc Ta = -15ºC to +70ºC Type 4X, IP67 Class II, III, Division 1, Group E, F and G, T4 Ta = -40ºC to +70ºC Type 4X, IP67 Pending -- inquire for availability II 1 G Ex ia IIC T4 Ga Ta = -40ºC to +70ºC IP67 II 3 G Ex nA IIC T4 Gc Ta = -15ºC to +70ºC IP67 II 2 D Ex tb IIIC T85ºC … T120ºC Db Ta = -15ºC to +70ºC IP67 Pending -- inquire for availability Ex ia IIC T4 Ga Ta = -40ºC to +70ºC IP67 Ex nA IIC T4 Gc Ta = -15ºC to + 70ºC IP67 Ex tb IIIC Db T85ºC … T120ºC Db Ta = -15ºC to +70ºC IP67 Intrinsically Safe Non-Incendive Dust Ignition Proof Flame Proof Intrinsically Safe ATEX Non Sparking Dust Ignition Proof Flame Proof Intrinsically Safe Non Sparking Dust Ignition Proof THE FOLLOWING APPROVAL STANDARDS ARE APPLICABLE: FM3600:2011, FM3610:2010, FM3611:2004, FM3615:2006, FM3616:2011, FM3810:2005, ANSI/ISA60079-0:2013, ANSI/ISA 60079-1:2009, ANSI/ISA 60079-11:2013, ANSI/ISA 60079-15:2012, ANSI/ISA 60079-26:2011, NEMA 250:2003, ANSI/IEC 60529:2004, C22.2 No. 0.4:2009, C22.2 No. 0.5:2008 C22.2 No. 30:2007 C22.2 No. 94:2001, C22.2 No. 157:2012, C22.2 No. 213:2012 C22.2 No. 1010.1:2009 CAN/CSA 60079-0:2011 CAN/CSA 60079-1:2011 CAN/CSA 60079-11:2011 CAN/CSA 60079-15:2012 C22.2 No. 60529:2005 EN60079-0:2012, EN60079-11:2012 EN60079-15:2010 EN60079-31:2009 EN60529+A1:1991-2000 IEC60079-0:2011 IEC60079-11:2011 IEC60079-15:2010 IEC60079-31:2008 SPECIAL CONDITIONS FOR SAFE USE: 1. The enclosure contains aluminum and is considered to present a potential risk of ignition by impact or friction. Care must be taken during installation and use to prevent impact or friction. 2. To maintain the T4 temperature code care shall be taken to ensure the enclosure temperature does not exceed 70ºC. 3. The risk of electrostatic discharge shall be minimized at installation, following the direction given in the instruction. 4. For Installation with ambient temperature of 70ºC, refer to the manufacturer’s instructions for guidance on proper selection of conductors. 5. Provisions shall be made to provide transient overvoltage protection to a level not to exceed 119Vdc. 6. WARNING – Explosion Hazard do not disconnect equipment when flammable or combustible atmosphere is present 7. When equipment is used in explosive dust atmospheres, the end user shall take precautions so that the thermal effects of the process temperature shall limit the equipment enclosure and probe surface temperatures to not exceed the required installation location temperature and shall be between T85ºC and T120ºC. NOTES: 1. For Explosion proof installations the I.S. ground terminal shall be connected to appropriate intrinsically safe ground in accordance with the Canadian Electrical code (CEC) or the national electrical code (NEC). For intrinsically safe installations the I.S. ground terminal does not require grounding. 2. Manufacturer’s installation instructions supplied with the protective barrier and the CEC or the NEC must be followed when installing this equipment. Barrier must be certified for Canadian & U.S. installation. 3. Control equipment connected to protective barriers must not use or generate more than 250 VDC or VRMS. 4. Agency approved dust tight seals must be used when transmitter is installed in Class II & III environments. 5. For supply connections, use wire suitable for the operating temperature. 6. Agency approved barriers with linear output characteristics must be used. These units are in compliance with the EMC directive 2004/108/EC, the PED directive 97/23/EC and the ATEX directive 94/9/EC. 17 18 2105 Oak Villa Blvd. | Baton Rouge, LA 70815 office 225.906.2343 | fax 225.906.2344 | [email protected] www.orioninstruments.com Bulletin: ORI-150.1 Effective: February 2016