VS-GB90DA60U www.vishay.com Vishay Semiconductors Insulated Gate Bipolar Transistor (Warp 2 Speed IGBT), 90 A FEATURES • NPT warp 2 speed IGBT technology with positive temperature coefficient • Square RBSOA • HEXFRED® anti-parallel diodes with ultrasoft reverse recovery • Fully isolated package • Very low internal inductance ( 5 nH typical) SOT-227 • Industry standard outline • UL approved file E78996 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRODUCT SUMMARY VCES 600 V IC DC 90 A at 90 °C BENEFITS VCE(on) typical at 100 A, 25 °C 2.40 V IF DC 108 A at 90 °C • Designed for increased operating efficiency in power conversion: UPS, SMPS, welding, induction heating • Easy to assemble and parallel Speed 8 kHz to 30 kHz Package SOT-227 Circuit Single switch diode • Direct mounting to heatsink • Plug-in compatible with other SOT-227 packages • Lower conduction losses and switching losses • Low EMI, requires less snubbing ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Collector to emitter voltage VCES Continuous collector current IC TEST CONDITIONS MAX. UNITS 600 V TC = 25 °C 147 TC = 90 °C 90 Pulsed collector current ICM 300 Clamped inductive load current ILM 300 Diode continuous forward current Gate-to-emitter voltage IF 180 108 ± 20 VGE Power dissipation, IGBT PD Power dissipation, diode PD Isolation voltage TC = 25 °C TC = 90 °C VISOL TC = 25 °C 625 TC = 90 °C 300 TC = 25 °C 379 TC = 90 °C 182 Any terminal to case, t = 1 min 2500 A V W V Revision: 20-May-16 Document Number: 94771 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB90DA60U www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Collector to emitter breakdown voltage Collector to emitter voltage Gate threshold voltage SYMBOL VBR(CES) VCE(on) VGE(th) Temperature coefficient of threshold voltage VGE(th)/TJ Collector to emitter leakage current ICES TEST CONDITIONS MIN. TYP. MAX. VGE = 0 V, IC = 250 μA 600 - - VGE = 15 V, IC = 100 A - 2.4 2.8 UNITS VGE = 15 V, IC = 100 A, TJ = 125 °C - 3 3.4 VGE = 15 V, IC = 100 A, TJ = 150°C - 3.3 - VCE = VGE, IC = 250 μA 3 3.9 5.0 VCE = VGE, IC = 250 μA, TJ = 125 °C - 2.5 - VCE = VGE, IC = 1 mA (25 °C to 125 °C) - -10 - mV/°C μA VGE = 0 V, VCE = 600 V - 7 100 VGE = 0 V, VCE = 600 V, TJ = 125 °C - 1.5 6.0 VGE = 0 V, VCE = 600 V, TJ = 150 °C - 6 10 V mA IC = 100 A, VGE = 0 V - 1.6 2.1 Forward voltage drop, diode VFM IC = 100 A, VGE = 0 V, TJ = 125 °C - 1.56 2.0 IC = 100 A, VGE = 0 V, TJ = 150 °C - 1.53 - Gate to emitter leakage current IGES VGE = ± 20 V - - ± 200 nA MIN. TYP. MAX. UNITS V SWITCHING CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL Total gate charge (turn-on) Qg Gate to emitter charge (turn-on) Qge Gate to collector charge (turn-on) TEST CONDITIONS - 460 690 - 160 250 Qgc - 70 130 IC = 100 A, VCC = 480 V, VGE = 15 V Turn-on switching loss Eon - 0.39 - Turn-off switching loss Eoff - 1.10 - Total switching loss Etot - 1.49 - Turn-on delay time td(on) - 245 - - 53 - - 240 - - 63 - - 0.52 - - 1.24 - - 1.76 - - 240 - - 54 - - 250 - - 80 - Rise time Turn-off delay time Fall time tr td(off) tf Turn-on switching loss Eon Turn-off switching loss Eoff Total switching loss Etot Turn-on delay time td(on) Rise time Turn-off delay time Fall time IC = 100 A, VCC = 360 V, VGE = 15 V, Rg = 5 L = 500 μH, TJ = 25 °C tr IC = 100 A, VCC = 360 V, VGE = 15 V, Rg = 5 L = 500 μH, TJ = 125 °C Energy losses include tail and diode recovery. Diode used 60APH06 td(off) tf nC mJ ns mJ ns TJ = 150 °C, IC = 300 A, Rg = 22 Reverse bias safe operating area RBSOA Fullsquare VGE = 15 V to 0 V, VCC = 400 V, VP = 600 V, L = 500 μH Diode reverse recovery time trr Diode peak reverse current Irr Diode recovery charge Qrr Diode reverse recovery time trr Diode peak reverse current Irr Diode recovery charge Qrr IF = 50 A, dIF/dt = 200 A/μs, VR = 200 V IF = 50 A, dIF/dt = 200 A/μs, VR = 200 V, TJ = 125 °C - 95 - - 10 - ns A - 480 - nC ns - 144 - - 16 - A - 1136 - nC Revision: 20-May-16 Document Number: 94771 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB90DA60U www.vishay.com Vishay Semiconductors THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Junction and storage temperature range IGBT Junction to case TEST CONDITIONS TJ, TStg MIN. TYP. MAX. UNITS -40 - 150 °C RthJC Diode Case to heatsink RthCS Flat, greased surface Weight Mounting torque 0.20 0.33 - 0.1 - - 30 - °C/W g - - 1.1 (9.7) Nm (lbf.in) Torque to heatsink - - 1.3 (11.5) Nm (lbf.in) SOT-227 160 Allowable Case Temperature (°C) 160 140 120 DC 100 80 60 40 20 0 0 20 40 60 80 100 120 140 140 120 100 80 60 40 20 0 160 0 20 40 60 80 100 120 140 160 180 200 IC - Continuous Collector Current (A) IF - Continuous Forward Current (A) Fig. 1 - Maximum DC IGBT Collector Current vs. Case Temperature Fig. 3 - Maximum Allowable Forward Current vs. Case Temperature, Diode Leg 300 200 VGE = 15V 250 160 IF - Forward Current (A) Allowable Case Temperature (°C) - Torque to terminal Case style IC - Collector to Emitter Current (A) - TJ = 125 °C 200 150 TJ = 25 °C TJ = 150 °C 100 50 0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 TJ = 150 °C 120 80 40 TJ = 25 °C TJ = 125 °C 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 VCE - Collector-to-Emitter Voltage (V) VF - Forward Voltage Drop (V) Fig. 2 - Typical Collector to Emitter Voltage (V) Fig. 4 - Typical Forward Voltage Drop Characteristics Revision: 20-May-16 Document Number: 94771 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB90DA60U Vishay Semiconductors 160 140 120 100 TJ = 150 °C 80 TJ = 125 °C 60 40 TJ = 25 °C 20 0 3.0 3.5 4.0 4.5 5.0 5.5 6.0 VCE - Collector-to-Emitter Voltage (V) IC- Collector-to-Emitter Current (A) www.vishay.com Ic = 100 A 3.2 3 Ic = 75 A 2.8 2.6 Ic = 50 A 2.4 2.2 2 1.8 Ic = 30 A 1.6 1.4 1.2 1 0 6.5 20 40 80 100 120 140 160 TJ - Junction Temperature (V) Fig. 5 - Typical IGBT Transfer Characteristics Fig. 8 - Typical IGBT Collector to Emitter Voltage vs. Junction Temperature, VGE = 15 V 1.6 1.4 1 Switching Energy (mJ) TJ = 150 °C 10 TJ = 125 °C 0.1 0.01 TJ = 25 °C 0.001 Eoff 1.2 1 0.8 Eon 0.6 0.4 0.2 0.0001 0 100 200 300 400 500 0 600 10 20 30 40 50 60 70 80 90 100 110 120 VCES - Collector-to-Emitter Voltage (V) IC - Collector Current (A) Fig. 9 - Typical IGBT Energy Losses vs. IC TJ = 125 °C, L = 500 μH, VCC = 360 V, Rg = 5 , VGE = 15 V, Diode used: 60APH06 Fig. 6 - Typical IGBT Zero Gate Voltage Collector Current 1 5 4.5 TJ = 25 °C 4 Switching Time (μs) VGETH - Threshold Voltage (V) 60 VGE - Gate-to-Emitter Voltage (V) 100 ICES - Collector Current (mA) 3.4 3.5 3 2.5 TJ =125 °C 2 td(off) td(on) tf 0.1 tr 1.5 0.01 1 0.20 0.40 0.60 0.80 1.00 IC (mA) Fig. 7 - Typical IGBT Threshold Voltage 0 20 40 60 80 100 120 IC - Collector Current (A) Fig. 10 - Typical IGBT Switching Time vs. IC TJ = 125 °C, L = 500 μH, VCC = 360 V, Rg = 5 , VGE = 15 V, Diode used: 60APH06 Revision: 20-May-16 Document Number: 94771 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB90DA60U www.vishay.com Vishay Semiconductors 4 2000 1500 3 2.5 Qrr (nC) Energy Losses (mJ) VR = 200 V IF = 50 A Eon 3.5 Eoff 2 1.5 125 °C 1000 500 1 25 °C 0.5 0 0 0 10 20 30 40 50 100 1000 Rg (Ω) diF/dt (A/μs) Fig. 11 - Typical IGBT Energy Loss vs. Rg TJ = 125 °C, IC = 100 A, L = 500 μH, VCC = 360 V, VGE = 15 V, Diode used: 60APH06 Fig. 14 - Typical Stored Charge vs. dIF/dt of Diode 35 VR = 200 V IF = 50 A td(on) 1 25 td(off) 20 Irr (A) Switching Time (μs) 30 tr 0.1 125 °C 15 tf 10 25 °C 5 0.01 0 0 10 20 30 40 50 60 100 1000 Rg (Ω) diF/dt (A/μs) Fig. 12 - Typical IGBT Switching Time vs. Rg TJ = 125 °C, L = 500 μH, VCC = 360 V, IC = 100 A, VGE = 15 V, Diode used: 60APH06 Fig. 15 - Typical Reverse Recovery Current vs. dIF/dt of Diode 200 VR = 200 V IF = 50 A 180 160 125 °C trr (ns) 140 120 100 25 °C 80 60 40 100 1000 diF/dt (A/μs) Fig. 13 - Typical Reverse Recovery Time vs. dIF/dt, of Diode Revision: 20-May-16 Document Number: 94771 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB90DA60U www.vishay.com Vishay Semiconductors ZthJC - Thermal Impedance Junction to Case (°C/W) 1 0.1 PDM D = 0.75 D = 0.50 D = 0.25 D = 0.1 D = 0.05 D = 0.02 DC 0.01 0.001 0.0001 0.001 0.01 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.1 . 1 10 t1 - Rectangular Pulse Duration (s) Fig. 16 - Maximum Thermal Impedance ZthJC Characteristics, IGBT ZthJC - Thermal Impedance Junction to Case (°C/W) 1 0.1 D = 0.75 D = 0.50 D = 0.25 D = 0.1 D = 0.05 D = 0.02 DC 0.01 0.001 0.0001 0.001 0.01 PDM t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.1 1 . 10 t1 - Rectangular Pulse Duration (s) Fig. 17 - Maximum Thermal Impedance ZthJC Characteristics, Diode 1000 IC (A) 100 10 1 0 1 10 100 1000 VCE (V) Fig. 18 - IGBT Reverse BIAS SOA, TJ = 150 °C, VGE = 15 V Revision: 20-May-16 Document Number: 94771 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB90DA60U www.vishay.com Vishay Semiconductors R= L D.U.T. VCC ICM VC * 50 V 1000 V D.U.T. 1 2 + -V CC Rg * Driver same type as D.U.T.; VC = 80 % of Vce(max) * Note: Due to the 50 V power supply, pulse width and inductor will increase to obtain Id 19a - Clamped Inductive Load Test Circuit 19b - Pulsed Collector Current Test Circuit Diode clamp/ D.U.T. L - + -5V + VCC D.U.T./ driver Rg 20a - Switching Loss Test Circuit 1 2 90 % 10 % 3 VC 90 % td(off) 10 % IC 5% tf tr td(on) t = 5 µs Eoff Eon Ets = (Eon + Eoff) 20b - Switching Loss Waveforms Test Circuit Revision: 20-May-16 Document Number: 94771 7 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GB90DA60U www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- G B 90 D A 60 U 1 2 3 4 5 6 7 8 1 - Vishay Semiconductors product 2 - Insulated Gate Bipolar Transistor (IGBT) 3 - B = IGBT Generation 5 4 - Current rating (90 = 90 A) 5 - Circuit configuration (D = single switch with antiparallel diode) 6 - Package indicator (A = SOT-227) 7 - Voltage rating (60 = 600 V) 8 - Speed/type (U = ultrafast IGBT) CIRCUIT CONFIGURATION CIRCUIT CIRCUIT CONFIGURATION CODE CIRCUIT DRAWING 3 (C) Single switch diode Lead Assignment 4 3 1 2 D 2 (G) 1, 4 (E) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95423 Packaging information www.vishay.com/doc?95425 Revision: 20-May-16 Document Number: 94771 8 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors SOT-227 Generation II DIMENSIONS in millimeters (inches) 38.30 (1.508) 37.80 (1.488) Ø 4.10 (0.161) Ø 4.30 (0.169) -A- 4 x M4 nuts 6.25 (0.246) 6.50 (0.256) 12.50 (0.492) 13.00 (0.512) 25.70 (1.012) 24.70 (0.972) -B- 7.45 (0.293) 7.60 (0.299) 14.90 (0.587) 15.20 (0.598) R full 2.10 (0.083) 2.20 (0.087) 30.50 (1.200) 29.80 (1.173) 31.50 (1.240) 32.10 (1.264) 4x 2.20 (0.087) 1.90 (0.075) 8.30 (0.327) 7.70 (0.303) 0.25 (0.010) M C A M B M 4.10 (0.161) 4.50 (0.177) 12.30 (0.484) 11.70 (0.460) -C0.13 (0.005) 25.00 (0.984) 25.50 (1.004) Note • Controlling dimension: millimeter Revision: 02-Aug-12 Document Number: 95423 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000