TOSHIBA 2SC5376F

2SC5376F
TOSHIBA Transistor Silicon NPN Epitaxial Type
2SC5376F
Audio Frequency General Purpose Amplifier Applications
For Muting and Switching Applications
·
Low Collector Saturation Voltage: VCE (sat) (1) = 15 mV (typ.)
·
High Collector Current: IC = 400 mA (max)
Unit: mm
@IC = 10 mA/IB = 0.5 mA
Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
15
V
Collector-emitter voltage
VCEO
12
V
Emitter-base voltage
VEBO
5
V
Collector current
IC
400
mA
Base current
IB
50
mA
Collector power dissipation
PC
100
mW
Junction temperature
Tj
125
°C
Tstg
-55 to 125
°C
Storage temperature range
JEDEC
―
JEITA
―
TOSHIBA
2-2HA1A
Marking
Equivalent Circuit (top view)
Type Name
hFE Classification
FA
1
2002-01-16
2SC5376F
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Collector cut-off current
ICBO
VCB = 15 V, IE = 0
¾
¾
0.1
mA
Emitter cut-off current
IEBO
VEB = 5 V, IC = 0
¾
¾
0.1
mA
300
¾
1000
hFE
DC current gain
(Note)
VCE = 2 V, IC = 10 mA
VCE (sat) (1)
IC = 10 mA, IB = 0.5 mA
¾
15
30
mV
VCE (sat) (2)
IC = 200 mA, IB = 10 mA
¾
110
250
mV
Base-emitter voltage
VBE (sat)
IC = 200 mA, IB = 10 mA
¾
0.87
1.2
V
Transition frequency
fT
VCE = 2 V, IC = 10 mA
80
130
¾
MHz
Collector-emitter saturation voltage
Collector output capacitance
Cob
VCB = 10 V, IE = 0, f = 1 MHz
¾
4.2
¾
pF
Collector-emitter on resistance
Ron
IB = 1 mA, Vin = 1 Vrms, f = 1 kHz
¾
0.9
¾
W
¾
85
¾
ns
¾
170
¾
ns
¾
40
¾
ns
ton
Switching time
Storage time
tstg
10 ms
600 9
INPUT 300 W
0V
60 9
OUTPUT
50 9
Turn-on time
VCC = 6 V
VBB = -3 V
Falll time
Note: hFE Classification
tf
Duty Cycle <
= 2%
IB1 = -IB2 = 5 mA
A: 300 to 600, B: 500 to 1000
2
2002-01-16
2SC5376F
IC – VCE
hFE – IC
1.0
10000
Common emitter
hFE
(A)
4
DC current gain
IC
Collector current
5
0.6
VCE = 2 V
3000
0.8
6
Common emitter
5000
Ta = 25°C
3
2
0.4
1
1000
Ta = 100°C
25
500
300
-25
100
50
0.2
30
IB = 0.5 mA
0
0
1
2
3
4
Collector-emitter voltage
VCE
10
0.1
5
0.3
1
(V)
3
Collector current
VCE (sat) – IC
Base-emitter saturation voltage
VBE (sat) (V)
Collector-emitter saturation voltage
VCE (sat) (mV)
30
100
50
30
Ta = 100°C
-25
25
5
3
0.3
1
3
10
Collector current
30
100
IC
(mA)
300
IC/IB = 20
Ta = 25°C
5
3
1
0.5
0.3
0.3
1
3
(pF)
Common emitter
VCE = 2V
100
Collector output capacitance
Collector current
IC
(mA)
Cob
300
50
30
25
-25
5
3
0.4
0.8
Base-emitter voltage VBE
1.2
10
Collector current
(V)
IC
300 500
IE = 0 A
f = 1 MHz
Ta = 25°C
30
10
5
3
0.3
1
3
10
Collector-base voltage VCB
3
100
(mA)
50
1
0.1
1.6
30
Cob – VCB
100
500
1
0.0
(mA)
1000
Common emitter
IC – VBE
Ta = 100°C
IC
300
10
0.1
0.1
1000
1000
10
100
50
Common emitter
500 IC/IB = 20
300
1
0.1
30
VBE (sat) – IC
1000
10
10
30
100
(V)
2002-01-16
2SC5376F
PC – Ta
160
Collector power dissipation
PC
(mW)
200
120
80
40
0
0
25
50
75
100
125
150
Ambient temperature Ta (°C)
4
2002-01-16
2SC5376F
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
5
2002-01-16