ALUMINUM ELECTROLYTIC CAPACITORS UE Chip Type , Vibration Resistance series Chip type with load life of 2000 to 5000 hours at 125°C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2002/95/EC). UB UE Vibration Resistance UH Specifications Item Performance Characteristics Category Temperature Range – 55 to +125°C ( φ 12.5 to 20) – 40 to +125°C ( φ 8 , φ 10) Rated Voltage Range 10 to 50V Rated Capacitance Range 33 to 4700µF Capacitance Tolerance ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Leakage Current For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Tangent of loss angle (tan δ) φ8 tan δ • φ 10 φ 12.5 to φ 20 (MAX) Rated voltage (V) Stability at Low Temperature Impedance ratio Z– 40°C / Z+20°C (MAX) 10 16 25 35 50 120Hz 0.26 0.20 0.16 0.14 0.14 20°C 0.22 0.18 0.16 0.14 0.12 10 16 25 35 50 φ 8 • φ 10 10 8 6 4 4 φ 12.5 to φ 20 8 6 3 3 4 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours (2000 hours for φ D = 8 and 10) at 125°C. Endurance Capacitance change tan δ Leakage current 120Hz Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Chip Type Type numbering system (Example : 50V 330µF) (φ8 to φ10) 1 5 6 7 8 9 10 11 12 13 14 Package code φ8 10 φ12.5 to 20 φ12.5 to 20 Size code A±0.2 B±0.2 φ D±0.5 A±0.2 A2E 330 10V Rated capacitance(330µF) 0.3 MAX. Series L±1.0 Capacitance H Pressure relief vent Configuration Code 8 to 18 NS 20 RS Series name 0.5MAX. B±0.2 φ D±0.5 C±0.2 Aid electrode GS MS ZD φD Rated voltage(50V) A±0.2 Plastic platform Voltage Lot No. Taping Taping Tray Capacitance Tolerance(±20%) Type φD E (φ12.5 to φ20) 330 µF UE 50V H1015 4 H Pressure relief vent nichicon C±0.2 3 L±1.0 Lot N0. Trade mark 0.5 MAX. 0.3 MAX. Voltage Trade mark 2 UUE 1 H 3 3 1 M NS 1 MS E Capacitance A±0.2 125°C Marking Plastic platform (mm) 8 10 12.5 16 18 20 A 2.9 3.2 4.8 5.4 6.4 6.2 B 8.3 10.3 13.6 17.1 19.1 21.1 C 8.3 10.3 13.6 17.1 19.1 21.1 E 3.1 4.5 4.0 6.3 6.3 8.8 H 1.1 to 1.5 1.1 to 1.5 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.3 to 1.7 Dimensions 10 1A V Cap.(µF) Code 33 47 100 220 330 470 330 470 101 221 331 471 680 681 1000 102 2200 222 3300 4700 332 472 16 1C 8 × 10 10 × 10 12.5 × 13.5 12.5 × 16 140 190 750 900 12.5 × 16 18 × 16.5 16 × 21.5 18 × 16.5 18 × 21.5 900 1200 1200 1200 1550 25 1E 8 × 10 10 × 10 12.5 × 13.5 12.5 × 13.5 16 × 16.5 140 190 750 750 1000 18 × 16.5 18 × 16.5 1200 1200 8 × 10 10 × 10 12.5 × 13.5 16 × 16.5 18 × 16.5 16 × 21.5 18 × 21.5 35 1V 140 190 750 1000 1200 1200 1550 50 1H 8 × 10 10 × 10 12.5 × 13.5 16 × 16.5 16 × 16.5 18 × 16.5 100 150 550 1000 1000 1200 20 × 21.5 1400 8 × 10 10 × 10 12.5 × 13.5 16 × 16.5 16 × 16.5 18 × 16.5 Case size φ D × L (mm) 90 130 500 850 850 950 Rated ripple Rated ripple current (mArms) at 125°C 100kHz In this case, 6 will be put at 12th digit of type numbering system, " " Frequency coefficient of rated ripple current φD φ 8 • φ 10 Frequency Cap.(µF) 33 to 330 100 to 680 φ 12.5 to φ 20 1000 to 4700 50 Hz 0.47 0.53 0.74 120 Hz 0.67 0.67 0.87 300 Hz 0.78 0.82 0.96 1 kHz 0.91 0.89 0.98 10 kHz or more 1.00 1.00 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100B