NVMFD5852NL, NVMFD5852NLWF Power MOSFET 40 V, 6.9 mW, 44 A, Dual N−Channel Logic Level, Dual SO−8FL http://onsemi.com Features • • • • • • Small Footprint (5x6 mm) for Compact Designs Low RDS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses NVMFD5852NLWF − Wettable Flanks Product AEC−Q101 Qualified and PPAP Capable This is a Pb−Free Device V(BR)DSS Dual N−Channel Symbol Value Unit VDSS 40 V Gate−to−Source Voltage VGS "20 V ID 44 A Power Dissipation RYJ−mb (Notes 1, 2, 3) Continuous Drain Current RqJA (Notes 1, 3 & 4) Power Dissipation RqJA (Notes 1 & 3) Pulsed Drain Current Tmb = 25°C Steady State Tmb = 100°C Tmb = 25°C Steady State Operating Junction and Storage Temperature Source Current (Body Diode) Single Pulse Drain−to−Source Avalanche Energy (TJ = 25°C, VGS = 10 V, IL(pk) = 40 A, L = 0.1 mH, RG = 25 W) Lead Temperature for Soldering Purposes (1/8″ from case for 10 s) W 15 ID A 10.6 3.2 PD W 1.6 IDM 329 A TJ, Tstg −55 to 175 °C IS 40 A EAS 80 mJ TL 260 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL RESISTANCE MAXIMUM RATINGS (Note 1) Parameter Junction−to−Mounting Board (top) − Steady State (Notes 2, 3) Junction−to−Ambient − Steady State (Note 3) Symbol Value RYJ−mb 5.6 RqJA 47 Unit °C/W 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Psi (Y) is used as required per JESD51−12 for packages in which substantially less than 100% of the heat flows to single case surface. 3. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 4. Maximum current for pulses as long as 1 second are higher but are dependent on pulse duration and duty cycle. © Semiconductor Components Industries, LLC, 2013 April, 2013 − Rev. 5 S2 MARKING DIAGRAM 13 TA = 100°C TA = 25°C, tp = 10 ms G2 S1 27 PD TA = 100°C TA = 25°C D2 G1 31 Tmb = 100°C TA = 25°C 44 A 12.0 mW @ 4.5 V D1 Drain−to−Source Voltage Continuous Drain Current RYJ−mb (Notes 1, 2, 3, 4) ID MAX 6.9 mW @ 10 V 40 V MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Parameter RDS(on) MAX 1 1 DFN8 5x6 (SO8FL) CASE 506BT D1 D1 S1 G1 S2 G2 5852xx AYWZZ D1 D1 D2 D2 D2 D2 5852NL = Specific Device Code for NVMFD5852NL 5852LW = Specific Device Code for NVMFD5852NLWF A = Assembly Location Y = Year W = Work Week ZZ = Lot Traceability ORDERING INFORMATION Device Package Shipping† NVMFD5852NLT1G DFN8 1500 / Tape & (Pb−Free) Reel NVMFD5852NLWFT1G DFN8 1500 / Tape & (Pb−Free) Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Publication Order Number: NVMFD5852NL/D NVMFD5852NL, NVMFD5852NLWF ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Symbol Test Condition Min Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 40 Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS Gate−to−Source Leakage Current V 37.3 VGS = 0 V, VDS = 40 V mV/°C TJ = 25°C 1.0 TJ = 125°C 100 IGSS VDS = 0 V, VGS = ±20 V VGS(TH) VGS = VDS, ID = 250 mA ±100 mA nA ON CHARACTERISTICS (Note 5) Gate Threshold Voltage Negative Threshold Temperature Coefficient VGS(TH)/TJ Drain−to−Source On Resistance RDS(on) Forward Transconductance gFS 1.4 2.4 6.3 V mV/°C VGS = 10 V, ID = 20 A 5.3 6.9 VGS = 4.5 V, ID = 20 A 8.7 12 VDS = 5 V, ID = 5 A 24 S 1800 pF mW CHARGES AND CAPACITANCES Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss 180 Total Gate Charge QG(TOT) 20 Threshold Gate Charge QG(TH) Gate−to−Source Charge QGS Gate−to−Drain Charge QGD Total Gate Charge QG(TOT) VGS = 0 V, f = 1.0 MHz, VDS = 25 V VGS = 4.5 V, VDS = 32 V, ID = 20 A 240 nC 1.5 5.5 10.9 VGS = 10 V, VDS = 32V, ID = 20 A 36 nC td(on) 12 ns tr 52 SWITCHING CHARACTERISTICS (Note 6) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time td(off) VGS = 4.5 V, VDS = 32 V, ID = 20 A, RG = 2.5 W 21 tf 13 td(on) 12 tr td(off) VGS = 10 V, VDS = 32 V, ID = 20 A, RG = 2.5 W tf ns 8.0 27 5.0 DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD TJ = 25°C 0.84 TJ = 125°C 0.69 tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 20 A 22.3 VGS = 0 V, dIS/dt = 100 A/ms, IS = 20 A QRR http://onsemi.com 2 V ns 12.8 9.4 15.2 5. Pulse Test: pulse width = 300 ms, duty cycle v 2%. 6. Switching characteristics are independent of operating junction temperatures. 1.1 nC NVMFD5852NL, NVMFD5852NLWF TYPICAL CHARACTERISTICS VDS ≥ 10 V ID, DRAIN CURRENT (A) 5.0 V 125 TJ = 25°C 100 4.4 V 75 4.0 V 50 3.6 V 3.4 V 25 0 RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 150 7.0 V 10 V 3.0 V 0 1 3 2 5 4 75 50 25 2.0 2.5 TJ = −55°C 3.0 3.5 4.0 4.5 Figure 2. Transfer Characteristics ID = 20 A TJ = 25°C 0.014 0.012 0.010 0.008 0.006 0.004 3 4 5 6 7 8 9 VGS, GATE−TO−SOURCE VOLTAGE (V) 10 5.0 0.0200 TJ = 25°C 0.0175 0.0150 VGS = 4.5 V 0.0125 0.0100 0.0075 VGS = 10 V 0.0050 0.0025 0 0 25 75 50 100 125 150 ID, DRAIN CURRENT (A) Figure 3. On−Resistance vs. VGS Figure 4. On−Resistance vs. Drain Current and Gate Voltage 2.2 100,000 VGS = 0 V ID = 20 A VGS = 10 V 1.8 IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) TJ = 125°C Figure 1. On−Region Characteristics 0.016 2.0 TJ = 25°C VGS, GATE−TO−SOURCE VOLTAGE (V) 0.018 2 100 VDS, DRAIN−TO−SOURCE VOLTAGE (V) 0.020 0.002 125 0 RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) ID, DRAIN CURRENT (A) 150 10,000 1.6 1.4 1.2 1.0 TJ = 150°C TJ = 125°C 1,000 0.8 0.6 −50 −25 0 25 50 75 100 125 150 175 100 5 10 15 20 25 30 35 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current vs. Voltage http://onsemi.com 3 40 NVMFD5852NL, NVMFD5852NLWF C, CAPACITANCE (pF) 2500 VGS = 0 V TJ = 25°C Ciss 2000 VGS, GATE−TO−SOURCE VOLTAGE (V) TYPICAL CHARACTERISTICS 1500 1000 Coss 500 0 Crss 0 10 20 30 40 8 6 Qgs 4 Qgd TJ = 25°C VDS = 32 V ID = 20 A 2 0 0 5 10 15 20 25 30 35 Qg, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate−to−Source and Drain−to−Source Voltage vs. Total Charge 40 100 IS, SOURCE CURRENT (A) VDS = 32 V ID = 20 A VGS = 4.5 V tr tf td(off) 100 td(on) 1 10 VGS = 0 V 75 50 TJ = 25°C 25 0 0.60 0.65 0.70 100 0.75 0.80 0.85 0.90 0.95 1.00 1.05 RG, GATE RESISTANCE (W) VSD, SOURCE−TO−DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 100 10 ms ID, DRAIN CURRENT (A) t, TIME (ns) QT VDS, DRAIN−TO−SOURCE VOLTAGE (V) 1000 10 10 10 1 0.1 100 ms 1 ms VGS = 10 V Single Pulse TC = 25°C RDS(on) Limit Thermal Limit Package Limit 0.1 10 ms dc 1 10 VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 11. Maximum Rated Forward Biased Safe Operating Area http://onsemi.com 4 100 NVMFD5852NL, NVMFD5852NLWF TYPICAL CHARACTERISTICS 100 RqJA (°C/W) Duty Cycle = 50% 10 20% 10% 5% 1 2% 1% 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.1 0.01 PULSE TIME (sec) Figure 12. Thermal Response http://onsemi.com 5 1 10 100 1000 NVMFD5852NL, NVMFD5852NLWF PACKAGE DIMENSIONS DFN8 5x6, 1.27P Dual Flag (SO8FL−Dual) CASE 506BT ISSUE E 2X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 MM FROM THE TERMINAL TIP. 4. PROFILE TOLERANCE APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. 5. DIMENSIONS D1 AND E1 DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 6. SEATING PLANE IS DEFINED BY THE TERMINALS. A1 IS DEFINED AS THE DISTANCE FROM THE SEATING PLANE TO THE LOWEST POINT ON THE PACKAGE BODY. 7. A VISUAL INDICATOR FOR PIN 1 MUST BE LOCATED IN THIS AREA. 0.20 C D A B D1 8 7 6 ÉÉ ÉÉ PIN ONE IDENTIFIER NOTE 7 1 2 2X 0.20 C 5 E1 E 4X h c 3 A1 4 TOP VIEW DETAIL B 0.10 C 0.10 C NOTE 4 SIDE VIEW C DETAIL A 4X 4X 1.40 2.30 b1 5 K1 BOTTOM VIEW MILLIMETERS MAX MIN MAX −−− 0.90 1.10 −−− −−− 0.05 0.33 0.42 0.51 0.33 0.42 0.51 0.20 −−− 0.33 5.15 BSC 4.70 4.90 5.10 3.90 4.10 4.30 1.50 1.70 1.90 6.15 BSC 5.70 5.90 6.10 3.90 4.15 4.40 1.27 BSC 0.45 0.55 0.65 −−− −−− 12 _ 0.51 −−− −−− 0.56 −−− −−− 0.48 0.61 0.71 3.25 3.50 3.75 1.80 2.00 2.20 6.59 3.70 4X 8 2X 0.56 L 4.84 N G 2X 2.08 K 4 DETAIL B 4X 4.56 0.75 e M SOLDERING FOOTPRINT* SEATING PLANE NOTE 6 8X D2 D3 1 ALTERNATE CONSTRUCTION DETAIL A A DIM A A1 b b1 c D D1 D2 D3 E E1 E2 e G h K K1 L M N E2 0.70 8X b 0.10 C A B 0.05 C 4X 1.27 PITCH 5.55 1.00 NOTE 3 DIMENSION: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NVMFD5852NL/D